Fullstock Pistol,
.50 caliber, 11-3/4" barrel,
percussion, walnut, iron trim,
used, by G. Nelson
Part Number: AAU-176
Availability: In Stock
Price: $999.00
Order Quantity:
This fullstock percussion pistol was hand shaped from a blank and assembled by contemporary builder George Nelson. This pistol is stocked in walnut, trimmed in brown iron furniture, fitted with a percussion lock and an 11-3/4" long .50 caliber swamped barrel with hooked breech. The bore is bright and has been well maintained.

The swamped barrel is cut rifled in .50 caliber with eight lands and grooves with a slow twist for a patched round ball. The 11-3/4" long barrel is marked G.B. NELSON 20 on the top flat. The barrel exterior is finished to a smooth silvery brown. The bore is bright and has been well maintained. The low fixed rear sight, is soldered to the top of the tang of the hooked breech. This allows for maximum sight radius on this pistol. The front sight is an iron blade. The muzzle has decorative filing. Two wedge keys retain the swamped barrel. The keys are surrounded by handmade brass escutcheon plates. The hooked breech and wedge keys allow the barrel to be dismounted for easy cleaning without risk of wetting the stock with black powder residue.

The walnut stock has a bag butt profile and is designed for a large hand. The pistol is trimmed in browned steel furniture. The bottom view shows the long grip rail of the trigger guard wrapping around the butt of the grip. The browned steel triggerguard has a finger spur to aid aiming. The triggerplate is shaped with a pineapple finial. The ramrod passes through a short entry pipe with octagon flats and matching ramrod pipe pinned to the forearm. We note there are two plugged holes around the pin that retains the ramrod pipe. The wooden ramrod is fitted with a brass tip threaded to accept 8-32 cleaning and loading accessories. A pewter muzzle cap protects the endgrain of the stock. The back view shows the single lock bolt that passes through a brass sideplate to engage the lock on the opposite side.

Ignition for the rifle is provided by an L&R percussion H.E. Dimick style lock. Expertly tuned and adjusted the lock has been browned to match the barrel and iron furniture. A heavy mainspring ensures fast lock time and positive ignition. A stainless steel Hot Shot nipple for No.11 caps is installed. The side flat of the breech plug is engraved with the initials GJN. The gently curved single trigger provides a smooth release of the lock.

This percussion fullstock pistol has a bright well maintained bore. It will be a joy to shoot in your next pistol competition or in the deep woods. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

.490" round balls, pure lead, Hornady, per 100
.490" round balls, pure lead, Hornady, per 100
Part Number: BALL-490
Availability: In Stock
Price: $16.99
Order Quantity:
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $4.19
Order Quantity:
Ball puller, steel screw, .50 caliber brass collar, 8-32 thread
Ball puller, steel screw, .50 caliber brass collar, 8-32 thread
Part Number: BP-50-8
Availability: In Stock
Price: $3.75
Order Quantity:
Brass Capper, for #11 caps, straight line, made in the USA, by Tedd Cash
Brass Capper, for #11 caps, straight line, made in the USA, by Tedd Cash
Part Number: CAPPER-P
Availability: In Stock
Price: $11.99
Order Quantity:
Fouling Scraper, flat face, brass, .50 caliber, 8-32 thread
Fouling Scraper, flat face, brass, .50 caliber, 8-32 thread
Part Number: FS-50-8
Availability: In Stock
Price: $4.09
Order Quantity:
Jag, jagged cleaning tip, brass, .50 caliber, 3/8 rod, 8-32 thread
Jag, jagged cleaning tip, brass, .50 caliber, 3/8 rod, 8-32 thread
Part Number: JS-50-6-8
Availability: In Stock
Price: $4.59
Order Quantity:
Powder measure, brass, adjustable 0 to 120 grains, with spout
Powder measure, brass, adjustable 0 to 120 grains, with spout
Part Number: MAS-120
Availability: In Stock
Price: $19.99
Order Quantity:
Trapper's MINK OIL TALLOW,
patch grease,
for match shooting & cold weather hunting,
one 8 oz. tin
Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin
Part Number: MINK-OIL
Availability: In Stock
Price: $7.59
Order Quantity:
Shooting patches, .010" cotton, .50 - .59 caliber, per 100, dry
Shooting patches, .010" cotton, .50 - .59 caliber, per 100, dry
Part Number: OX-10-50-D
Availability: In Stock
Price: $4.19
Order Quantity:
Shooting patches, .015" cotton, .50 - .59 caliber, per 100, dry
Shooting patches, .015" cotton, .50 - .59 caliber, per 100, dry
Part Number: OX-15-50-D
Availability: In Stock
Price: $4.19
Order Quantity:
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Part Number: OX-CLEAN-58C
Availability: In Stock
Price: $4.99
Order Quantity:
Nipple, 1/4-28 thread, short for T/C rifles, #11 CCI cap, stainless steel

Cone length: 0.300" Thread journal length: 0.200" Overall length: 0.500" Diameter of base: 0.307"
Nipple, 1/4-28 thread, short for T/C rifles, #11 CCI cap, stainless steel
  • Cone length: 0.300"
  • Thread journal length: 0.200"
  • Overall length: 0.500"
  • Diameter of base: 0.307"
Part Number: PST-S
Availability: In Stock
Price: $4.99
Order Quantity:
Ramrod, 3/8" hickory, 48" long, brass tip, 8-32 thread
Ramrod, 3/8" hickory, 48" long, brass tip, 8-32 thread
Part Number: RAMROD-6-8-B
Availability: In Stock
Price: $18.99
Order Quantity:
Short Starter, patch & ball starter, 7/16" hickory rod for .50 caliber.
Short Starter, patch & ball starter, 7/16" hickory rod for .50 caliber.
Part Number: ST-7
Availability: In Stock
Price: $9.99
Order Quantity:
Patch puller, corkscrew worm, steel, brass base, 8-32 thread
Patch puller, corkscrew worm, steel, brass base, 8-32 thread
Part Number: WORM-CORK-8
Availability: Out of Stock, request notification when available.
Price: $6.89
  
Track's Catalog 18,
Out of Print
Please use our FREE on-line catalog and web site.
Track's Catalog 18, Out of Print Please use our FREE on-line catalog and web site.
Part Number: CATALOG-18
Availability: Book is no longer being printed or produced. Once we sell through our remaining inventory, item will no longer be available.  We will not be getting any more in.
Price: $10.00
  
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2022Track of the Wolf, Inc.
Accepted Credit Cards