Third Model Dragoon Revolver
.44 caliber, 7-1/2" barrel,
blued, walnut, used with factory carton,
by Aldo Uberti
Part Number: AAS-346
Availability: In Stock
Price: $329.00
Order Quantity:
Known as the Colt Third Model Dragoon revolver, this revolver is well finished, with a blued round barrel, factory engraved cylinder, color case hardened frame, brass back-strap and triggerguard, reddish brown walnut grips, and color case hardened loading lever. A bit larger and more powerful than the Colt 1860 Army, the Dragoon was an early favorite. Made by Aldo Uberti of Italy, the revolver is in excellent condition, with the factory carton. The factory nipples have been replaced with stainless steel nipples that should give long service life.

Our top view shows the blued engraved cylinder and 7-1/2" tapered round barrel. This pistol is factory original. No markings are visible on the top of the barrel; instead Uberti has discreetly hidden them below the loading lever on the bottom of the gun. Our bottom view shows the color case hardened loading lever, and the polished brass triggerguard. The base of the barrel is hidden by the loading lever, it is here that the factory markings can be found.

The factory recommends .457" round balls, and each chamber will hold 35 grains of FFFg powder. Cover each ball with a small amount of our #LUBE-SPG bullet lubricant grease. Despite your best efforts, this revolver will need to be cleaned after 12 or 18 shots. Remove the wedge, barrel, and cylinder. Wipe the face of the cylinder, and wipe the cylinder pin.If you continue to load and fire a badly fouled revolver, the effort needed to cock and fire the gun will become greater, causing the small internal hand, spring, and cylinder latch to become worn and slightly damaged. Continued abuse will cause the cylinder and latch to become out-of-time. Simple cleaning and maintenance will prevent problems; this pistol was made to be a precision shooter.

Very lightly used this percussion revolver has only a few marks in the finish and includes the factory carton. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

.451" round balls, pure lead, Hornady, per 100
.451" round balls, pure lead, Hornady, per 100
Part Number: BALL-451
Availability: In Stock
Price: $11.49
Order Quantity:
.454" round balls, pure lead, Hornady, per 100
.454" round balls, pure lead, Hornady, per 100
Part Number: BALL-454
Availability: In Stock
Price: $11.49
Order Quantity:
.457" round balls, pure lead, Hornady, per 100
.457" round balls, pure lead, Hornady, per 100
Part Number: BALL-457
Availability: In Stock
Price: $15.99
Order Quantity:
Choke Tube Lube,
anti-seize grease, 3/4 ounce tube,
by Birchwood Casey
Choke Tube Lube, anti-seize grease, 3/4 ounce tube, by Birchwood Casey
Part Number: BC-CTL
Availability: In Stock
Price: $6.99
Order Quantity:
Belt, oiled brown leather, 1-3/4" wide, waist size 30 to 46
Belt, oiled brown leather, 1-3/4" wide, waist size 30 to 46
Part Number: BELT-BU-1O
Availability: In Stock
Price: $17.99
Order Quantity:
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $3.99
Order Quantity:
Bore mop, 100% Cotton, for .45 caliber, 10-32 thread, washable
Bore mop, 100% Cotton, for .45 caliber, 10-32 thread, washable
Part Number: BORE-MOP-45-10
Availability: In Stock
Price: $3.19
Order Quantity:
Bore brush, bronze, for .45 caliber, 10-32 thread
Bore brush, bronze, for .45 caliber, 10-32 thread
Part Number: BRUSH-45-10
Availability: In Stock
Price: $2.99
Order Quantity:
Brass Capper, for #11 caps, straight line, made in the USA, by Tedd Cash
Brass Capper, for #11 caps, straight line, made in the USA, by Tedd Cash
Part Number: CAPPER-P
Availability: In Stock
Price: $10.99
Order Quantity:
Powder Flask,
Colt pattern for Army & Navy revolvers,
accepts all spouts with 10-1mm threads
Powder Flask, Colt pattern for Army & Navy revolvers, accepts all spouts with 10-1mm threads
Part Number: FLASK-COLT
Availability: Out of Stock, request notification when available
Price: $34.99
  
Powder Flask, for Colt Walker & Dragoon Revolvers
Powder Flask, for Colt Walker & Dragoon Revolvers
Part Number: FLASK-WALKER
Availability: Out of Stock, request notification when available
Price: $69.99
  
Holster, modern hunting style,
9" barrel, brown leather,
fits Colt Walker or Dragoon revolvers
Holster, modern hunting style, 9" barrel, brown leather, fits Colt Walker or Dragoon revolvers
Part Number: HOLSTER-M-W
Availability: Out of Stock, request notification when available
Price: $22.99
  
Button jagged cleaning tip, .44 caliber, brass, 8-32 thread
Button jagged cleaning tip, .44 caliber, brass, 8-32 thread
Part Number: JB-44-8
Availability: In Stock
Price: $3.99
Order Quantity:
Trapper's MINK OIL TALLOW,
patch grease,
for match shooting & cold weather hunting,
one 8 oz. tin
Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin
Part Number: MINK-OIL
Availability: In Stock
Price: $6.99
Order Quantity:
Nipple Wrench for Revolvers,
for .36 & .44 Colt Army & Navy Models,
and other revolvers with a large nipple recess.
Nipple Wrench for Revolvers, for .36 & .44 Colt Army & Navy Models, and other revolvers with a large nipple recess.
Part Number: NW-140
Availability: In Stock
Price: $6.99
Order Quantity:
Nipple Wrench for Walker, a special replica designed for Colt .44 Walker & .44 Dragoon revolvers.
Nipple Wrench for Walker, a special replica designed for Colt .44 Walker & .44 Dragoon revolvers.
Part Number: NW-WALKER
Availability: In Stock
Price: $25.99
Order Quantity:
Cleaning Patches, 2" diameter, bag of 100, pure cotton flannel, for .30 to .40 caliber
Cleaning Patches, 2" diameter, bag of 100, pure cotton flannel, for .30 to .40 caliber
Part Number: OX-CLEAN-45C
Availability: In Stock
Price: $2.99
Order Quantity:
Ox-Yoke Revolver Wonder Seal, 100 seals for .44-.45 cal.
Ox-Yoke Revolver Wonder Seal, 100 seals for .44-.45 cal.
Part Number: OX-REV-44-SEAL
Availability: In Stock
Price: $9.69
Order Quantity:
.44/.45 caliber revolver Ox-Yoke Wonder Wad,
bag of 100 lubricated felt wads
.44/.45 caliber revolver Ox-Yoke Wonder Wad, bag of 100 lubricated felt wads
Part Number: OX-WAD-44-W
Availability: In Stock
Price: $7.59
Order Quantity:
Nipple, 1/4-28 thread, for 1847 Walker & Dragoon revolvers by most mfg. including Armi San Marco, Tucker, Sherrod & Company Dragoon by A. Uberti, for #11 CCI cap, hardened steel

Cone length: 0.400" Thread journal length: 0.225" Overall length: 0.625" Diameter of base: 0.307"
Nipple, 1/4-28 thread, for 1847 Walker & Dragoon revolvers by most mfg. including Armi San Marco, Tucker, Sherrod & Company Dragoon by A. Uberti, for #11 CCI cap, hardened steel
  • Cone length: 0.400"
  • Thread journal length: 0.225"
  • Overall length: 0.625"
  • Diameter of base: 0.307"
Part Number: RST-WI
Availability: In Stock
Price: $5.99
Order Quantity:
Nipple, 1/4-28 thread, for 1847 Walker & Dragoon revolver by most mfg. including Armi San Marco, Tucker, Sherrod & Company Dragoon by A. Uberti, for #11 CCI cap, stainless steel

Cone length: 0.400" Thread journal length: 0.225" Overall length: 0.625" Diameter of base: 0.307"
Nipple, 1/4-28 thread, for 1847 Walker & Dragoon revolver by most mfg. including Armi San Marco, Tucker, Sherrod & Company Dragoon by A. Uberti, for #11 CCI cap, stainless steel
  • Cone length: 0.400"
  • Thread journal length: 0.225"
  • Overall length: 0.625"
  • Diameter of base: 0.307"
Part Number: RST-WS
Availability: In Stock
Price: $5.99
Order Quantity:
Drift Punch,
knurled brass,
for wedge keys and sights.
Drift Punch, knurled brass, for wedge keys and sights.
Part Number: TOOL-KEY-B
Availability: In Stock
Price: $4.99
Order Quantity:
Track's Catalog 18,
Out of Print
Please use our FREE on-line catalog and web site.
Track's Catalog 18, Out of Print Please use our FREE on-line catalog and web site.
Part Number: CATALOG-18
Availability: Book is no longer being printed or produced. Once we sell through our remaining inventory, item will no longer be available.  We will not be getting any more in.
Price: $10.00
  
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2019Track of the Wolf, Inc.
Accepted Credit Cards