Double Shotgun,
20 gauge, 27" browned barrels,
percussion, walnut, checkered wrist,
used, by Davide Pedersoli
Part Number: AAS-282
Availability: Item has been shipped out for inspection, and at this time, is NOT available. You can click "Notify Me" and enter your email address.  We will notify you IF this item becomes available again.
  
This double percussion shotgun is stocked in walnut. The polished and browned barrels are 27-1/2", including the breech plugs. Later production shotguns feature a tiny screw or sight bead under the muzzles, to latch the ramrod during recoil, this shotgun features that tiny screw. The bores are bright and have been well maintained. This shotgun is in overall good condition, with only a few handling marks in the stock and some speckling on the exterior of the barrel around the nipples. The 13-1/4" and 14-1/4" trigger reach should fit today's average shooter quite well. The weight is 7.1 pounds.

The polished barrels are 27" long and are finished to a deep plum brown color. The barrels have some bright spots in the finish from normal handling and cleaning, especially around the breech end. The bores are bright, clean, and ready to shoot. The breech has an engraved band to match the tang, locks, and triggerguard. The front sight is a standard brass bead. The 20 gauge barrels measure .630" at the muzzle of the right barrel, while the left is choked down to .615". We recommend our 19 gauge wads for use with this shotgun on the right barrel. The choked bore requires a slightly different mixture of wads & cards. Our wad manufacturer recommends our 19 gauge over powder card passed through on it's side, a 24 gauge fiber wad, and a standard 19 gauge overshot card which should be flexible enough to pass through the choke.

The straight grip is checkered, and the walnut stock is fitted with a blued steel buttplate. This wide buttplate is nearly flat, comfortable with full loads. The stock has a few handling marks from field use. The forend has a single wedge key retaining the barrel. The key allows for quick disassembly for cleaning. Simply withdraw the ramrod, press out the key with firm thumb pressure, and lift the muzzle end, to dismount the barrels for easy cleaning. The long tang is color case hardened and factory engraved. Two blued steel tang screws and one bolt have been fitted. Viewed from below, the color case hardened triggerguard and triggerplate can be seen. Not visible in this picture is the ramrod entry pipe that has been finished in the same fashion. The forward two ramrod pipes are browned to match the barrel, but the entry pipe is case colored to match the triggerguard, triggerplate, tang, and lock plates. The wooden ramrod is fitted with a brass loading tip. The hidden brass tip is threaded to accept 10-32 cleaning and loading accessories.

Remove the two standard 1/4-28 nipples, using our # #NW-120 nipple wrench, and immerse the breech end in a bucket of hot soapy water. Place a wet cleaning patch on our #Ramrod-6-10-B cleaning rod, fitted with our # #Jag-20-10 cleaning jag tip. Push the air out, and draw the water in, as you pump the ramrod the full length of each barrel, a few times. Change the water, and the patch. When the patch comes out clean, you are ready to wipe the bores dry, using a patch wetted with WD-40 or other water displacing oil. Never insert a dry patch. If you used warm water, the warm barrels will dry instantly.

The Pedersoli shotgun locks are color case hardened, factory engraved with foliage and scrolls. Both locks are perfect inside, with strong springs, secure half-cock notches, and full cock notches that release smoothly with normal trigger finger pressure. Davide Pedersoli double shotguns use our standard 1/4-28 nipple. However, he taps the thread seats to the minimum size, knowing that normal use will wear the nipple threads, over time, enlarging them to better fit a standard nipple. Our standard 1/4-28 nipples are quite snug in the thread seats. Apply a tiny amount of Birchwood Casey's Choke Tube Lube, or any good anti-seize grease, to the nipple threads, and install the nipples. Our 1/4-28 nipples are the correct size. New nipples have been installed and lubed with anti-seize.

This 20 gauge double barrel shotgun has been well maintained. It will serve the next lucky bird hunter well in the field this Fall. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $3.99
Order Quantity:
Bore mop, 100% Cotton, for .62 caliber, 10-32 thread, washable
Bore mop, 100% Cotton, for .62 caliber, 10-32 thread, washable
Part Number: BORE-MOP-62-10
Availability: In Stock
Price: $3.19
Order Quantity:
Button jagged cleaning tip, 20 gauge, brass, 10-32 thread
Button jagged cleaning tip, 20 gauge, brass, 10-32 thread
Part Number: JAG-20-10
Availability: In Stock
Price: $3.99
Order Quantity:
Nipple Wrench for Rifles, short style, with slotted end
Nipple Wrench for Rifles, short style, with slotted end
Part Number: NW-160
Availability: In Stock
Price: $6.99
Order Quantity:
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Part Number: OX-CLEAN-58C
Availability: In Stock
Price: $3.89
Order Quantity:
20 gauge shotgun Premium Lube Wad,
bag of 100 lubricated felt wads
20 gauge shotgun Premium Lube Wad, bag of 100 lubricated felt wads
Part Number: OX-WAD-20-W
Availability: In Stock
Price: $11.99
Order Quantity:
Ramrod, 7/16" hickory, 48" long, brass tip, 10-32 thread
Ramrod, 7/16" hickory, 48" long, brass tip, 10-32 thread
Part Number: RAMROD-7-10-B
Availability: In Stock
Price: $15.99
Order Quantity:
Ramrod for 20 gauge Double Percussion Shotgun by Davide Pedersoli,
3/8" ebony black Delrin nylon, 27-1/8" long. Brass tips, with tempered steel ball puller hidden under the .end cap. 
Made by Track of the Wolf, in Elk River, Minnesota, we make the brass tips and assemble the ramrod.
Ramrod for 20 gauge Double Percussion Shotgun by Davide Pedersoli, 3/8" ebony black Delrin nylon, 27-1/8" long. Brass tips, with tempered steel ball puller hidden under the .end cap. Made by Track of the Wolf, in Elk River, Minnesota, we make the brass tips and assemble the ramrod.
Part Number: RAMROD-271-DP-20
Availability: In Stock
Price: $19.99
Order Quantity:
Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, stainless steel
Cone length 0.440"Overall length: 0.635" Thread journal length: 0.195" Diameter of base: 0.307"
Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, stainless steel
  • Cone length 0.440"
  • Overall length: 0.635"
  • Thread journal length: 0.195"
  • Diameter of base: 0.307"
Part Number: RST-S
Availability: In Stock
Price: $4.99
Order Quantity:
Adaptor for rod tip, stainless steel, knurled center, 
10-32 male to 5/16-27 female
Adaptor for rod tip, stainless steel, knurled center, 10-32 male to 5/16-27 female
Part Number: SA-10
Availability: In Stock
Price: $2.99
Order Quantity:
Buckshot #4
.240" round balls, lead,
by Hornady, 5 pounds
Buckshot #4 .240" round balls, lead, by Hornady, 5 pounds
Part Number: SHOT-4
Availability: In Stock
Price: $26.99
Order Quantity:
Bird Shot #7,
chilled lead shot,
5 pound box, blend of #7 & #8,
safe for use in antique
black powder shotguns
and fowling guns
Bird Shot #7, chilled lead shot, 5 pound box, blend of #7 & #8, safe for use in antique black powder shotguns and fowling guns
Part Number: SHOT-BIRD-7
Availability: In Stock
Price: $17.59
Order Quantity:
19 gauge, .636" ideal for .626" bore, .125" over powder card, 1000, by Circle Fly Wads
19 gauge, .636" ideal for .626" bore, .125" over powder card, 1000, by Circle Fly Wads
Part Number: WAD-19-A
Availability: In Stock
Price: $10.99
Order Quantity:
19 gauge, .636" ideal for .626" bore, .025" over shot card, 1000, by Circle Fly Wads
19 gauge, .636" ideal for .626" bore, .025" over shot card, 1000, by Circle Fly Wads
Part Number: WAD-19-B
Availability: In Stock
Price: $10.99
Order Quantity:
19 gauge, .636" ideal for .626" bore, .500" thick fibre wad, 500, by Circle Fly Wads
19 gauge, .636" ideal for .626" bore, .500" thick fibre wad, 500, by Circle Fly Wads
Part Number: WAD-19-C
Availability: In Stock
Price: $10.99
Order Quantity:
24 gauge, .589" ideal for .579" bore, .500" thick fibre wad, 500, by Circle Fly Wads
24 gauge, .589" ideal for .579" bore, .500" thick fibre wad, 500, by Circle Fly Wads
Part Number: WAD-24-C
Availability: In Stock
Price: $10.99
Order Quantity:
Track's Catalog 18,
Out of Print
Please use our FREE on-line catalog and web site.
Track's Catalog 18, Out of Print Please use our FREE on-line catalog and web site.
Part Number: CATALOG-18
Availability: Book is no longer being printed or produced. Once we sell through our remaining inventory, item will no longer be available.  We will not be getting any more in.
Price: $10.00
  
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2019Track of the Wolf, Inc.
Accepted Credit Cards