Double Barrel Shotgun,
12 gauge with integral full choke, 28" barrels,
percussion, walnut, blued, used, by Davide Pedersoli
Part Number: AAS-030
Availability: In Stock
Price: $599.00
Order Quantity:
This nice double percussion shotgun is stocked in walnut and trimmed in blued and color case hardened steel furniture. The front action locks are factory engraved with a floral pattern. The gun was manufactured by Davide Pedersoli of Italy with integral full and full choke on the barrel and is often call the "Turkey and Trap" model. Weight is 7.1 pounds to help absorb the recoil from the 12 gauge bores. The 13-3/8" and 14-3/8" trigger reach should fit today's average shooter quite well. This used shotgun has a number of handling marks on the stock and marks on the blue barrel finish.

The polished and blued barrels are 28" long including the breech plug. The 12 gauge bore bores are choked to .680" at the muzzle. Both bores are mirror bright and have been very well maintained. The front sight is a standard brass bead. The Italian proof marks and manufacturer marks have been neatly placed at the bottom of the breech end of the barrel for a period appearance. Only the serial number is visible on the side of the left hand barrel.

The straight grip is checkered, and the walnut stock is fitted with a blued steel buttplate. This wide buttplate is nearly flat, making it comfortable with full loads. The comb and wrist of the stock has many small dings and handling marks. The long tang is color case hardened, and factory engraved to match the triggerguard, locks, and barrel breeches. The forend is has a single key that retains the barrel. The key allows for quick disassembly for cleaning. Simply withdraw the ramrod, press out the key with firm thumb pressure, and lift the muzzle end, to dismount the barrels for easy cleaning. The factory ramrod is fitted with a brass shotgun style loading tip on one end and a brass tip with 10-32 threads for loading and cleaning accessories on the opposite end. No cheekpiece is carved, making this shotgun equally handy for right or left hand shooters. The wedge key is slotted and fitted with a capture pin, which prevents it from becoming lost in the field, exactly like better original guns.

Remove the two standard 1/4-28 nipples, using our #NW-120 nipple wrench, and immerse the breech end in a bucket of hot soapy water. Place a wet cleaning patch on our #Ramrod-7-10-B cleaning rod, fitted with our #Jag-16-10 cleaning jag tip. Push the air out, and draw the water in, as you pump the ramrod the full length of each barrel, a few times. Change the water, and the patch. When the patch comes out clean, you are ready to wipe the bores dry, using a patch wetted with water displacing oil.

The Pedersoli shotgun locks are case colored and engraved with a floral pattern. Both locks are perfect inside, with strong springs, secure half-cock notches, and full cock notches that release smoothly with normal trigger finger pressure. Davide Pedersoli double shotguns use our standard 1/4-28 nipple. However, he taps the thread seats to the minimum size, knowing that normal use will wear the nipple threads, over time, enlarging them to better fit a standard nipple. Our standard 1/4-28 nipples are quite snug in the thread seats. Apply a tiny amount of Birchwood Casey's Choke Tube Lube, or any good anti-seize grease, to the nipple threads, and install the nipples. Our 1/4-28 nipples are the correct size.

A great used double barrel percussion shotgun with integral full and full choke. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $3.99
Order Quantity:
Bore mop, 100% Cotton, for .75 caliber, 10-32 thread, washable
Bore mop, 100% Cotton, for .75 caliber, 10-32 thread, washable
Part Number: BORE-MOP-75-10
Availability: In Stock
Price: $3.19
Order Quantity:
Black powder, GOEX, 1 pound, made in the USA, 2Fg medium granulation for rifles, shotguns, muskets, cartridges. Shipped in full cases, 25 one pound cans, any mix of granulations, any mix of brands.
Black powder, GOEX, 1 pound, made in the USA, 2Fg medium granulation for rifles, shotguns, muskets, cartridges. Shipped in full cases, 25 one pound cans, any mix of granulations, any mix of brands.
Part Number: GOEX-FFG
Availability: In Stock
Price: $23.52
Order Quantity:
Special Restrictions Apply
Not available for export outside the U.S.A.
Black Powder must be shipped in full cases, 25 one pound cans. Order any mix of granulations, any mix of brands. Shipped in full cases of 25 one pound cans. Minimum order is 25 pounds. Maximum order is 50 pounds.
Black powder, GOEX, 1 pound, made in the USA, 1Fg coarse granulation for large bore shotguns, muskets, cartridges. Shipped in full cases, 25 one pound cans, any mix of granulations, any mix of brands.
Black powder, GOEX, 1 pound, made in the USA, 1Fg coarse granulation for large bore shotguns, muskets, cartridges. Shipped in full cases, 25 one pound cans, any mix of granulations, any mix of brands.
Part Number: GOEX-FG
Availability: In Stock
Price: $23.52
Order Quantity:
Special Restrictions Apply
Not available for export outside the U.S.A.
Black Powder must be shipped in full cases, 25 one pound cans. Order any mix of granulations, any mix of brands. Shipped in full cases of 25 one pound cans. Minimum order is 25 pounds. Maximum order is 50 pounds.
Button jagged cleaning tip, 16 gauge, brass, 10-32 thread
Button jagged cleaning tip, 16 gauge, brass, 10-32 thread
Part Number: JAG-16-10
Availability: In Stock
Price: $3.99
Order Quantity:
Trapper's MINK OIL TALLOW,
patch grease,
for match shooting & cold weather hunting,
one 8 oz. tin
Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin
Part Number: MINK-OIL
Availability: In Stock
Price: $6.99
Order Quantity:
12 gauge shotgun Premium Lubed Wad,
bag of 100 lubricated felt wads
12 gauge shotgun Premium Lubed Wad, bag of 100 lubricated felt wads
Part Number: OX-WAD-12-W
Availability: In Stock
Price: $11.99
Order Quantity:
Ramrod, 7/16" hickory, 48" long, brass tip, 10-32 thread
Ramrod, 7/16" hickory, 48" long, brass tip, 10-32 thread
Part Number: RAMROD-7-10-B
Availability: In Stock
Price: $15.99
Order Quantity:
Ramrod for 13 gauge Double Percussion Shotgun by Davide Pedersoli,
3/8" stained hickory, 28-1/4" long. Brass tips, with tempered steel ball puller hidden under the .end cap. 

Made by Track of the Wolf, in Elk River, Minnesota, we make the brass tips and assemble the ramrod.
Ramrod for 13 gauge Double Percussion Shotgun by Davide Pedersoli, 3/8" stained hickory, 28-1/4" long. Brass tips, with tempered steel ball puller hidden under the .end cap. Made by Track of the Wolf, in Elk River, Minnesota, we make the brass tips and assemble the ramrod.
Part Number: RAMROD-282-DP-13-H
Availability: In Stock
Price: $27.99
Order Quantity:
Nipple, 1/4-28 thread, for standard rifle, 
#11 CCI cap, square shank,
hardened steel, ideal for restoration

Cone length: 0.440" Thread journal length: 0.195" Overall length: 0.635" Diameter of base: 0.307"
Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, square shank, hardened steel, ideal for restoration
  • Cone length: 0.440"
  • Thread journal length: 0.195"
  • Overall length: 0.635"
  • Diameter of base: 0.307"
Part Number: RST-I
Availability: In Stock
Price: $4.99
Order Quantity:
Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, stainless steel
Cone length 0.440"Overall length: 0.635" Thread journal length: 0.195" Diameter of base: 0.307"
Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, stainless steel
  • Cone length 0.440"
  • Overall length: 0.635"
  • Thread journal length: 0.195"
  • Diameter of base: 0.307"
Part Number: RST-S
Availability: In Stock
Price: $4.99
Order Quantity:
Buckshot #4
.240" round balls, lead,
by Hornady, 5 pounds
Buckshot #4 .240" round balls, lead, by Hornady, 5 pounds
Part Number: SHOT-4
Availability: In Stock
Price: $26.99
Order Quantity:
Bird Shot #7,
chilled lead shot,
5 pound box, blend of #7 & #8,
safe for use in antique
black powder shotguns
and fowling guns
Bird Shot #7, chilled lead shot, 5 pound box, blend of #7 & #8, safe for use in antique black powder shotguns and fowling guns
Part Number: SHOT-BIRD-7
Availability: In Stock
Price: $17.59
Order Quantity:
12 gauge, .740" ideal for .729" bore, .125" over powder card, 1000, by Circle Fly Wads
12 gauge, .740" ideal for .729" bore, .125" over powder card, 1000, by Circle Fly Wads
Part Number: WAD-12-A
Availability: In Stock
Price: $10.99
Order Quantity:
12 gauge, .740" ideal for .729" bore, .025" over shot card, 1000, by Circle Fly Wads
12 gauge, .740" ideal for .729" bore, .025" over shot card, 1000, by Circle Fly Wads
Part Number: WAD-12-B
Availability: In Stock
Price: $10.99
Order Quantity:
14 gauge, .703" ideal for .693" bore, .500" thick fibre wad, 500, by Circle Fly Wads
14 gauge, .703" ideal for .693" bore, .500" thick fibre wad, 500, by Circle Fly Wads
Part Number: WAD-14-C
Availability: In Stock
Price: $10.99
Order Quantity:
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
Part Number: WORM-CORK-10
Availability: In Stock
Price: $6.59
Order Quantity:
Track's Catalog 18,
Out of Print
Please use our FREE on-line catalog and web site.
Track's Catalog 18, Out of Print Please use our FREE on-line catalog and web site.
Part Number: CATALOG-18
Availability: Book is no longer being printed or produced. Once we sell through our remaining inventory, item will no longer be available.  We will not be getting any more in.
Price: $10.00
  
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2019Track of the Wolf, Inc.
Accepted Credit Cards