Lyman Trade Rifle, .50 caliber, 28" barrel, 1 in 48" twist, right hand, walnut, brass trim, new in-the-box, unfired

Home > Guns > Percussion guns > Percussion rifles

Lyman Trade Rifle,
.50 caliber, 28" barrel,
1 in 48" twist, right hand,
walnut, brass trim, new in-the-box, unfired

Part Number:	LYMAN-TRADE-50-P
Availability:
Price:	$499.99
Order Quantity:

Stocked in dark stained imported walnut, this .50 caliber percussion rifle has a 15/16" octagon 28" barrel to give it a modest weight. Trimmed in brass furniture with a large bow single trigger. The factory finished walnut stock is finished to a satin sheen, the barrel is blued, and the lock is color case hardened in mottled colors. All brass furniture is polished bright. Average weight is 8.5 pounds with a trigger reach of 13-3/4" making it well suited for today's average size shooter.

The .50 caliber, 28" long barrel is finished to a deep blue color. The barrel is rifled with a 1 in 48" twist to shoot either patched round balls, or conical bullets. The barrel is fitted with a square partridge style front sight, and elevation adjustable rear sight. All of the factory markings can be found on the top three flats of the barrel at the breech.

Not too long, not too heavy, not too valuable to carry in the woods while stalking game, this rifle will become your favorite hunting partner. This is an ideal rifle for hunting white tail deer, mule deer, or elk, especially during specific muzzle loading seasons. Maintenance is easy, the hooked breech allows the barrel to be easily dismounted for cleaning without risk of wetting the stock with water containing black powder residue. To dismount the barrel, put the lock on half cock, withdraw the ramrod, drift the key past the underlug, and the barrel can be lifted from the barrel channel for ease of cleaning. Remove the nipple and place the breech end of the barrel in a bucket of soapy water. Run a wet patch down and up the bore, the pumping action will flush all the fouling from the barrel. Once the bore is clean, run a dry patch down the bore to pick up any moisture followed by a oily patch. Dry and oil the exterior then reassemble the rifle. The factory ramrod has 10-32 threads for loading and cleaning accessories. Order a cleaning jag, ball puller, and patch worm, sold separately. The color case hardened percussion lock has reliable coil spring internals and is fitted to a hooked breech with a 6-.75mm threaded stainless steel nipple.

This halfstock percussion rifle is new in the box, unfired. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

bullets, .50 caliber, Hornady Great Plains, 385 grain, pure lead, hollow base, hollow point, per 20

Part Number:	BALL-50-385
Availability:
Price:	$12.19
Order Quantity:

bullets, .50 caliber, T/C Maxi-Ball, hand cast pure lead, about 378 grains, per 20

Part Number:	BALL-50-MAXI
Availability:
Price:	$14.59
Order Quantity:

.490" round balls, pure lead, Hornady, per 100

Part Number:	BALL-490
Availability:
Price:	$16.99
Order Quantity:

Track's best Black Powder BORE CLEAN Solvent, with flip-top spout

Part Number:	BORE-CLEAN
Availability:
Price:	$4.19
Order Quantity:

Bore mop, 100% Cotton, for .48 to .50 caliber, 10-32 thread, washable

Part Number:	BORE-MOP-50-10
Availability:
Price:	$3.19
Order Quantity:

Ball puller, steel screw, .50 caliber brass collar, 10-32 thread

Part Number:	BP-50-10
Availability:
Price:	$3.99
Order Quantity:

Bore brush, bronze, for .50 caliber, 10-32 thread

Part Number:	BRUSH-50-10
Availability:
Price:	$2.99
Order Quantity:

Brass Capper, for #11 caps, straight line, made in the USA, by Tedd Cash

Part Number:	CAPPER-P
Availability:
Price:	$12.59
Order Quantity:

Jag, jagged cleaning tip, brass, .50 caliber, 3/8 rod, 10-32 thread

Part Number:	JS-50-6-10
Availability:
Price:	$4.59
Order Quantity:

Powder measure, brass, adjustable 0 to 120 grains, with spout

Part Number:	MAS-120
Availability:
Price:	$20.99
Order Quantity:

Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin

Part Number:	MINK-OIL
Availability:
Price:	$7.59
Order Quantity:

Nipple Wrench for Rifles, short style, with slotted end

Part Number:	NW-160
Availability:
Price:	$9.99
Order Quantity:

Shooting patches, .015" cotton, .50 - .59 caliber, per 100, dry

Part Number:	OX-15-50-D
Availability:
Price:	$4.39
Order Quantity:

Shooting patches, .015" cotton, .50 - .59 caliber, per 100, wonder-lube

Part Number:	OX-15-50-W
Availability:
Price:	$6.19
Order Quantity:

Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber

Part Number:	OX-CLEAN-58C
Availability:
Price:	$5.29
Order Quantity:

Ramrod for Lyman Trade Rifle, 3/8" brown Delrin nylon, 28-3/4" long, flared brass tip threaded 8-32 at front, 10-32 thread at rear. Made by Track of the Wolf, in Elk River, Minnesota, we make the brass tips and assemble the ramrod.

Part Number:	RAMROD-286-LYM
Availability:
Price:	$20.99
Order Quantity:

Our Strongest Loading & Cleaning Rod, 5/16" stainless, over 29" long for Lyman Trade Rifle or T/C Hawken, rigid handle, 10-32 thread

Part Number:	RAMROD-C-29-10
Availability:
Price:	$31.50
Order Quantity:

Nipple, 6-.75mm metric thread, for InvestArms, Cabela's Hawken rifles, #11 CCI cap, stainless steel

Cone length: 0.440"
Thread journal length: 0.195"
Overall length: 0.635"
Diameter of base: 0.307"

Part Number:	RLP-S
Availability:
Price:	$5.99
Order Quantity:

Short Starter, patch & ball starter, 7/16" hickory rod for .50 caliber.

Part Number:	ST-7
Availability:
Price:	$9.99
Order Quantity:

Patch puller, corkscrew worm, steel, brass base, 10-32 thread

Part Number:	WORM-CORK-10
Availability:
Price:	$6.89

Track's Catalog 18, Out of Print Please use our FREE on-line catalog and web site.

Part Number:	CATALOG-18
Availability:
Price:	$10.00

Top of Page Home > Guns > Percussion guns > Percussion rifles