Hawken Rifle,
.54 caliber 36" barrel,
L&R percussion lock, iron trim, walnut,
new, unfired, by George Nelson
Part Number: AAU-770
Availability: In Stock
Price: $3,199.00
Order Quantity:
Stocked in walnut, this classic percussion halfstock Hawken rifle is trimmed with traditional Hawken iron furniture. The 36" barrel and iron trim are finished to a dark brown. A classic Hawken hooked breech and two wedge keys retain the straight octagon barrel. allowing instant take-down, for easy cleaning. This rifle was assembled by contemporary builder George Nelson, and is signed on the top flat of the barrel. Trigger reach is 14", to fit todays average shooter. This rifle weighs 9.6 pounds.

The .54 caliber 1" straight octagon rifle barrel is cut rifled with six wide lands and grooves in a caliber appropriate 1 in 66" twist, ideal for tightly patched round balls. The bore is bright in as-new condition. The barrel is finished to a smooth dark brown. A nickel silver front sight with brass base is dovetailed behind the muzzle. The semi buck horn rear sight is dovetailed 8-1/2" ahead of the breech.

The straight grain walnut stock has a dark brown tone and is finished to a satin egg shell finish. The stock is trimmed in iron furniture with a classic Hawken crescent buttplate that securely engages your shoulder. The forend is fitted with a poured pewter muzzle cap. This percussion rifle is made to accept a sturdy 7/16" ramrod. The ramrod is fitted with a iron tip threaded 8-32 for loading and cleaning accessories. The top view shows the long tang hooked breech. Both tang screws engage the long steel trigger plate, forming a strong steel sandwich that reinforces the wrist from above and below. This was one of Jacob and Sam Hawken's secrets. If a rifle becomes broken, it will most likely be broken at the wrist, the thinnest section of the rifle stock. The triggerplate and tang reinforce the wrist, strengthening this critical area, making the Hawken rifle reliable, durable, and famous. The beaver tail toeplate protects the pointed toe while loading. The wedge keys extend just past the opposite oval escutcheons. Notice the typical beaver tail cheek rest, double set triggers, and single lock bolt fitted to a recessed steel escutcheon, all classic features of an 1840 era Hawken rifle. It balances nicely in your hands, for offhand shooting.

The L&R percussion Hawken lock has been finished to a dark brown. This mid-19th century styled lock has a strong mainspring, stirrup link, and fly detent, all nice internal features. The front upper edge of the lock plate has been neatly shaped to blend into lock panels. Mr. Nelson notes that the lock is tightly fitted and should you need to remove it from the stock it is best to loosen the lock bolt and gently tap the bolt head to push the lock from the mortise. The L&R double lever double set triggers are tuned to fire the lock set, or unset. The lock and triggers may be cocked or set in any sequence.

New in unfired condition, this Hawken rifle is well fitted, and is ready for use in the field. It will serve you well. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

.530" round balls, pure lead, Hornady, per 100
.530" round balls, pure lead, Hornady, per 100
Part Number: BALL-530
Availability: In Stock
Price: $18.99
Order Quantity:
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $4.19
Order Quantity:
Ball puller, steel screw, .54 caliber brass collar, 8-32 thread
Ball puller, steel screw, .54 caliber brass collar, 8-32 thread
Part Number: BP-54-8
Availability: Item is currently sold out.
Price: $3.99
Order Quantity:
  
Brass Capper, for No. 11 caps, straight line, made in the USA, by Tedd Cash
Brass Capper, for No. 11 caps, straight line, made in the USA, by Tedd Cash
Part Number: CAPPER-P
Availability: In Stock
Price: $12.59
Order Quantity:
Powder Flask,
brass body, brass dispensing valve,
embossed Diamond or Basket Weave pattern
accepts 10-1mm threaded spouts
Powder Flask, brass body, brass dispensing valve, embossed Diamond or Basket Weave pattern accepts 10-1mm threaded spouts
Part Number: FLASK-DIAMOND
Availability: Out of Stock, request notification when available.
Price: $50.99
  
Flush Nipple,
1/4-28 thread,
stainless steel, with 1/4" square shank for nipple wrench,
with tubing, fits Thompson Center
Flush Nipple, 1/4-28 thread, stainless steel, with 1/4" square shank for nipple wrench, with tubing, fits Thompson Center
Part Number: FLUSH-RST
Availability: In Stock
Price: $4.99
Order Quantity:
Fouling Scraper, flat face, brass, .54 caliber, 8-32 thread
Fouling Scraper, flat face, brass, .54 caliber, 8-32 thread
Part Number: FS-54-8
Availability: In Stock
Price: $4.29
Order Quantity:
Jag, jagged cleaning tip, brass, .54 caliber, 7/16" rod, 8-32 thread
Jag, jagged cleaning tip, brass, .54 caliber, 7/16" rod, 8-32 thread
Part Number: JS-54-7-8
Availability: In Stock
Price: $5.09
Order Quantity:
Powder measure, brass, adjustable 0 to 120 grains, with spout
Powder measure, brass, adjustable 0 to 120 grains, with spout
Part Number: MAS-120
Availability: In Stock
Price: $20.99
Order Quantity:
Trapper's MINK OIL TALLOW,
patch grease,
for match shooting & cold weather hunting,
one 8 oz. tin
Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin
Part Number: MINK-OIL
Availability: In Stock
Price: $7.59
Order Quantity:
Shooting patches, .018" pillow ticking, .50 - .59 caliber, per 100, dry
Shooting patches, .018" pillow ticking, .50 - .59 caliber, per 100, dry
Part Number: OX-18-50-D
Availability: In Stock
Price: $4.89
Order Quantity:
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Part Number: OX-CLEAN-58C
Availability: In Stock
Price: $5.29
Order Quantity:
Ramrod, 3/8" hickory, 48" long, brass tip, 8-32 thread
Ramrod, 3/8" hickory, 48" long, brass tip, 8-32 thread
Part Number: RAMROD-6-8-B
Availability: In Stock
Price: $18.99
Order Quantity:
Nipple, 1/4-28 thread, for standard rifle, 
#11 CCI cap, square shank,
hardened steel, ideal for restoration

Cone length: 0.440" Thread journal length: 0.195" Overall length: 0.635" Diameter of base: 0.307"
Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, square shank, hardened steel, ideal for restoration
  • Cone length: 0.440"
  • Thread journal length: 0.195"
  • Overall length: 0.635"
  • Diameter of base: 0.307"
Part Number: RST-I
Availability: In Stock
Price: $4.99
Order Quantity:
Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, stainless steel
Cone length 0.440"Overall length: 0.635" Thread journal length: 0.195" Diameter of base: 0.307"
Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, stainless steel
  • Cone length 0.440"
  • Overall length: 0.635"
  • Thread journal length: 0.195"
  • Diameter of base: 0.307"
Part Number: RST-S
Availability: In Stock
Price: $4.99
Order Quantity:
Short Starter, patch & ball starter, 1/2" wooden rod for .54 and larger calibers.
Short Starter, patch & ball starter, 1/2" wooden rod for .54 and larger calibers.
Part Number: ST-8
Availability: In Stock
Price: $9.99
Order Quantity:
Patch puller, corkscrew worm, steel, brass base, 8-32 thread
Patch puller, corkscrew worm, steel, brass base, 8-32 thread
Part Number: WORM-CORK-8
Availability: Out of Stock, request notification when available.
Price: $6.89
  
Track's Catalog 18,
Out of Print
Please use our FREE on-line catalog and web site.
Track's Catalog 18, Out of Print Please use our FREE on-line catalog and web site.
Part Number: CATALOG-18
Availability: Book is no longer being printed or produced. Once we sell through our remaining inventory, item will no longer be available.  We will not be getting any more in.
Price: $10.00
  
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2023Track of the Wolf, Inc.
Accepted Credit Cards