Henry E. Leman ~ Lancaster, Pennsylvania,
.50 caliber, 32" Green River Rifle Works barrel,
Siler Mountain percussion lock, faux stripe maple,
by Les Bennet formerly of Green River Rifle Works, Roosevelt, Utah
Part Number: AAU-753
Availability: In Stock
Price: $2,999.00
Order Quantity:
This H. E. Leman half stock rifle was hand finished from the H. E. Leman rifle kit once made by Green River Rifle Works, of Roosevelt, Utah. Although they closed years ago, their fine rifles are highly collectible. Perhaps the most famous of the Lancaster makers, Henry Eicholtz Leman (also spelled Lehman early in his career), created a factory to produce arms for westbound settlers, in Lancaster County, Pennsylvania. This percussion half stock plains rifle is modeled after his 1840 to 1880 period work. Trigger reach is 14" to fit today's average size shooter. Weight is 8.8 pounds.

The seven groove cut rifled 1" octagon barrel is 32" length. These Green River Rifle Works (GRRW) barrels were famous for accuracy, during the 1970 era of their production. Cut rifled with seven deep equal lands and grooves, the bore is as-new. The quarter flat of the breech is stamped with GRRW, CA, L-09, LB touch mark for Les Bennet, and .50. The barrel is fitted with a steel blade front sight and a semi-buckhorn rear sight dovetailed 8-1/4" ahead of the breech.

Stocked in maple the wood has fine grain structure, and appears to be hard and dense. The stock has faux figure hand painted stripes, which was a common finish on antique H.E. Leman rifles. The stock appears as-new with no handling marks. The rifle is trimmed in brass furniture with a poured pewter muzzlecap. The buttstock has the Leman style straight line comb architecture. The single trigger and unique triggerguard with large loop and grip rail, instantly identify this as the work of Henry Leman. The single trigger is leveraged with a high pivot point, for very smooth and light trigger release. The lock has a strong mainspring, and short hammer fall, for fast lock time.

This top view reveals that the 32" octagon barrel is breeched with a round end tang. Notice the filed flats on the buttplate, which blend nicely into the comb, forming a smooth transition. Sleek and slim, this rifle is well shaped and well finished. The bottom view shows the toeplate and triggerguard. The pewter forend cap acts as the ramrod entry pipe. The ramrod is fitted with a brass tip with 8-32 threads for loading and cleaning accessories. A single lock bolt retains the lock, and a simple brass tear drop inlay serves as a sideplate. The beaver tail cheekpiece is a typical feature of plains rifles from this period.

Ignition is provided by this percussion lock, by Bud Siler, of Asheville, North Carolina. The lock has a smooth nice trigger release, short hammer travel, and fast lock time. The Siler Mountain caplock was introduced late in the production and not many of the Green River Rifle Works Leman Rifles were fitted with Siler Mountain locks. This is lucky for the new owner as spare parts, if ever needed, are available from stock. However, we doubt that the lock will ever need spare parts, since it has withstood the test of time.

Assembled from one of the GRRW original kits, by one of the original craftsmen. This is an as-new example of a Green River Rifle Works Leman Trade Rifle with period style faux stripe finish, brass furniture, maple stock, built from the best parts made in America. The famous Green River Rifle Works closed many years ago, and their rifles are prized by shooters. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

.490" round balls, pure lead, Hornady, per 100
.490" round balls, pure lead, Hornady, per 100
Part Number: BALL-490
Availability: In Stock
Price: $16.99
Order Quantity:
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $4.19
Order Quantity:
Ball puller, steel screw, .50 caliber brass collar, 8-32 thread
Ball puller, steel screw, .50 caliber brass collar, 8-32 thread
Part Number: BP-50-8
Availability: Item is currently sold out.
Price: $3.99
Order Quantity:
  
Brass Capper, for No. 11 caps, straight line, made in the USA, by Tedd Cash
Brass Capper, for No. 11 caps, straight line, made in the USA, by Tedd Cash
Part Number: CAPPER-P
Availability: In Stock
Price: $12.59
Order Quantity:
Flush Nipple,
1/4-28 thread,
stainless steel, with 1/4" square shank for nipple wrench,
with tubing, fits Thompson Center
Flush Nipple, 1/4-28 thread, stainless steel, with 1/4" square shank for nipple wrench, with tubing, fits Thompson Center
Part Number: FLUSH-RST
Availability: In Stock
Price: $4.99
Order Quantity:
Fouling Scraper, flat face, brass, .50 caliber, 8-32 thread
Fouling Scraper, flat face, brass, .50 caliber, 8-32 thread
Part Number: FS-50-8
Availability: In Stock
Price: $4.09
Order Quantity:
Jag, jagged cleaning tip, brass, .50 caliber, 3/8 rod, 8-32 thread
Jag, jagged cleaning tip, brass, .50 caliber, 3/8 rod, 8-32 thread
Part Number: JS-50-6-8
Availability: In Stock
Price: $4.59
Order Quantity:
Powder measure, brass, adjustable 0 to 120 grains, with spout
Powder measure, brass, adjustable 0 to 120 grains, with spout
Part Number: MAS-120
Availability: In Stock
Price: $20.99
Order Quantity:
Trapper's MINK OIL TALLOW,
patch grease,
for match shooting & cold weather hunting,
one 8 oz. tin
Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin
Part Number: MINK-OIL
Availability: In Stock
Price: $7.59
Order Quantity:
Shooting patches, .010" cotton, .50 - .59 caliber, per 100, dry
Shooting patches, .010" cotton, .50 - .59 caliber, per 100, dry
Part Number: OX-10-50-D
Availability: In Stock
Price: $4.39
Order Quantity:
Shooting patches, .015" cotton, .50 - .59 caliber, per 100, dry
Shooting patches, .015" cotton, .50 - .59 caliber, per 100, dry
Part Number: OX-15-50-D
Availability: In Stock
Price: $4.39
Order Quantity:
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Part Number: OX-CLEAN-58C
Availability: In Stock
Price: $5.29
Order Quantity:
Ramrod, 3/8" hickory, 48" long, brass tip, 8-32 thread
Ramrod, 3/8" hickory, 48" long, brass tip, 8-32 thread
Part Number: RAMROD-6-8-B
Availability: In Stock
Price: $18.99
Order Quantity:
Nipple, 1/4-28 thread, for standard rifle, 
#11 CCI cap, square shank,
hardened steel, ideal for restoration

Cone length: 0.440" Thread journal length: 0.195" Overall length: 0.635" Diameter of base: 0.307"
Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, square shank, hardened steel, ideal for restoration
  • Cone length: 0.440"
  • Thread journal length: 0.195"
  • Overall length: 0.635"
  • Diameter of base: 0.307"
Part Number: RST-I
Availability: In Stock
Price: $4.99
Order Quantity:
Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, stainless steel
Cone length 0.440"Overall length: 0.635" Thread journal length: 0.195" Diameter of base: 0.307"
Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, stainless steel
  • Cone length 0.440"
  • Overall length: 0.635"
  • Thread journal length: 0.195"
  • Diameter of base: 0.307"
Part Number: RST-S
Availability: In Stock
Price: $4.99
Order Quantity:
Short Starter, patch & ball starter, 7/16" hickory rod for .50 caliber.
Short Starter, patch & ball starter, 7/16" hickory rod for .50 caliber.
Part Number: ST-7
Availability: In Stock
Price: $9.99
Order Quantity:
Patch puller, corkscrew worm, steel, brass base, 8-32 thread
Patch puller, corkscrew worm, steel, brass base, 8-32 thread
Part Number: WORM-CORK-8
Availability: Out of Stock, request notification when available.
Price: $6.89
  
Track's Catalog 18,
Out of Print
Please use our FREE on-line catalog and web site.
Track's Catalog 18, Out of Print Please use our FREE on-line catalog and web site.
Part Number: CATALOG-18
Availability: Book is no longer being printed or produced. Once we sell through our remaining inventory, item will no longer be available.  We will not be getting any more in.
Price: $10.00
  
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2023Track of the Wolf, Inc.
Accepted Credit Cards