H.E. Leman Trade Rifle,
.50 caliber, 32" Austin & Halleck barrel,
percussion, curly maple, brass and iron,
new, by Dr. Gary White
Part Number: AAT-761
Availability: In Stock
Price: $1,699.00
Order Quantity:
Henry Eicholtz Leman made many rifles during his career, circa 1840 until the late 1880's, in Lancaster County, Pennsylvania. Although Leman made many styles of rifles, perhaps he is best known for his Indian Trade Rifles. This reproduction of Henry Leman's Trade Rifle is stocked in curly maple, and features a barrel from an Austin & Halleck Mountain Rifle. Mixed furniture is quite common on original H. E. Leman rifles and this rifle is trimmed in brass furniture, with an iron buttplate. Assembled by Dr. Gary White this rifle is offered in new condition. The rifle weighs 8.9 pounds, with a 13-3/4" trigger reach.

The heart of the rifle is a 32" long .50 caliber Austin & Halleck 1" straight octagon barrel. This is a new-old-stock barrel that was used on the Spanish made mass produced Austin & Halleck Mountain Rifle. This barrel still retains all of the factory information, warnings, and address markings. The bore is rifled with a 1:66 twist for a tightly patched round ball. Internally the bore is bright and clean, in perfect condition. The exterior is finished to a smooth chocolate brown. The barrel is fitted with a full-buckhorn rear sight dovetailed 6" ahead of the breech and a silver blade front sight dovetailed 1-1/2" behind the muzzle. The left oblique flat is also marked Doc near the breech.

Stocked in curly maple, stained golden brown, the wood has nice figure running its entire length. The buttstock has the Leman style straight line comb architecture. The iron buttplate is a typical mid 19th century design with a deep curve to engage the shoulder. The top view shows the hooked breech of the barrel and tang. The barrel is retained to the forearm by one key that passes directly through the stock with out the use of escutcheons. Remove the ramrod, press the key out, and the barrel can easily be lifted from the stock.

The bottom view shows the brass toeplate and triggerguard. One steel screw retains the toeplate. The brass trigger guard is pinned both front and rear to retain it to the stock. The forend is fitted with a brass nose cap to protect the end grain. A brass ramrod entry pipe is fitted behind the nose cap and two browned iron ramrod pipes are mounted to the under rib. The 3/8" diameter ramrod is fitted with a brass tip threaded to accept 8-32 cleaning and loading accessories. We note the ramrod extends 1" past the muzzle. A single lock bolt engages the lock through a small brass sideplate. A simple square cheek is carved in the left side of the buttstock.

Ignition is provided an R.E. Davis Leman percussion lock. Perhaps the most famous of the Lancaster makers, Henry Eicholtz Leman (spelled Lehman early in his career), created a factory to produce arms for westbound settlers, in Lancaster County, Pennsylvania. His locks were often sold at hardware stores and purchased and used by other gunmakers. This reproducion lock features the distinctive flat tail at the rear of the plate seen on many of those original locks. The lock is browned to match the barrel and has a strong mainspring. The drum is well supported by the lock plate and is fitted with a 1/4-28 hardened iron nipple. The single trigger is pinned to provide a smooth release of the lock.

This halfstock Plains rifle would be ideal for a late fur trade or mid to late 19th century west bound settler impression. The rifle is new, with a bright bore, it is ready to shoot. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

.490" round balls, pure lead, Hornady, per 100
.490" round balls, pure lead, Hornady, per 100
Part Number: BALL-490
Availability: In Stock
Price: $14.49
Order Quantity:
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $4.19
Order Quantity:
Ball puller, steel screw, .50 caliber brass collar, 8-32 thread
Ball puller, steel screw, .50 caliber brass collar, 8-32 thread
Part Number: BP-50-8
Availability: In Stock
Price: $3.75
Order Quantity:
Brass Capper, for #11 caps, straight line, made in the USA, by Tedd Cash
Brass Capper, for #11 caps, straight line, made in the USA, by Tedd Cash
Part Number: CAPPER-P
Availability: In Stock
Price: $10.99
Order Quantity:
Flush Nipple,
1/4-28 thread,
stainless steel, with 1/4" square shank for nipple wrench,
with tubing, fits Thompson Center
Flush Nipple, 1/4-28 thread, stainless steel, with 1/4" square shank for nipple wrench, with tubing, fits Thompson Center
Part Number: FLUSH-RST
Availability: In Stock
Price: $4.99
Order Quantity:
Fouling Scraper, flat face, brass, .50 caliber, 8-32 thread
Fouling Scraper, flat face, brass, .50 caliber, 8-32 thread
Part Number: FS-50-8
Availability: In Stock
Price: $4.09
Order Quantity:
Jag, jagged cleaning tip, brass, .50 caliber, 3/8 rod, 8-32 thread
Jag, jagged cleaning tip, brass, .50 caliber, 3/8 rod, 8-32 thread
Part Number: JS-50-6-8
Availability: In Stock
Price: $4.59
Order Quantity:
Powder measure, brass, adjustable 0 to 120 grains, with spout
Powder measure, brass, adjustable 0 to 120 grains, with spout
Part Number: MAS-120
Availability: In Stock
Price: $18.99
Order Quantity:
Trapper's MINK OIL TALLOW,
patch grease,
for match shooting & cold weather hunting,
one 8 oz. tin
Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin
Part Number: MINK-OIL
Availability: In Stock
Price: $7.49
Order Quantity:
Shooting patches, .010" cotton, .50 - .59 caliber, per 100, dry
Shooting patches, .010" cotton, .50 - .59 caliber, per 100, dry
Part Number: OX-10-50-D
Availability: In Stock
Price: $3.70
Order Quantity:
Shooting patches, .015" cotton, .50 - .59 caliber, per 100, dry
Shooting patches, .015" cotton, .50 - .59 caliber, per 100, dry
Part Number: OX-15-50-D
Availability: In Stock
Price: $3.70
Order Quantity:
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Part Number: OX-CLEAN-58C
Availability: In Stock
Price: $4.69
Order Quantity:
Ramrod, 3/8" hickory, 48" long, brass tip, 8-32 thread
Ramrod, 3/8" hickory, 48" long, brass tip, 8-32 thread
Part Number: RAMROD-6-8-B
Availability: In Stock
Price: $18.99
Order Quantity:
Nipple, 1/4-28 thread, for standard rifle, 
#11 CCI cap, square shank,
hardened steel, ideal for restoration

Cone length: 0.440" Thread journal length: 0.195" Overall length: 0.635" Diameter of base: 0.307"
Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, square shank, hardened steel, ideal for restoration
  • Cone length: 0.440"
  • Thread journal length: 0.195"
  • Overall length: 0.635"
  • Diameter of base: 0.307"
Part Number: RST-I
Availability: Out of Stock, request notification when available.
Price: $4.99
  
Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, stainless steel
Cone length 0.440"Overall length: 0.635" Thread journal length: 0.195" Diameter of base: 0.307"
Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, stainless steel
  • Cone length 0.440"
  • Overall length: 0.635"
  • Thread journal length: 0.195"
  • Diameter of base: 0.307"
Part Number: RST-S
Availability: In Stock
Price: $4.99
Order Quantity:
Short Starter, patch & ball starter, 7/16" hickory rod for .50 caliber.
Short Starter, patch & ball starter, 7/16" hickory rod for .50 caliber.
Part Number: ST-7
Availability: In Stock
Price: $8.99
Order Quantity:
Patch puller, corkscrew worm, steel, brass base, 8-32 thread
Patch puller, corkscrew worm, steel, brass base, 8-32 thread
Part Number: WORM-CORK-8
Availability: In Stock
Price: $6.89
Order Quantity:
Track's Catalog 18,
Out of Print
Please use our FREE on-line catalog and web site.
Track's Catalog 18, Out of Print Please use our FREE on-line catalog and web site.
Part Number: CATALOG-18
Availability: Book is no longer being printed or produced. Once we sell through our remaining inventory, item will no longer be available.  We will not be getting any more in.
Price: $10.00
  
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2021Track of the Wolf, Inc.
Accepted Credit Cards