T/C Renegade Hunter,
.50 caliber, 26" barrel,
percussion, walnut, iron, quick cock hammer,
used, by Thompson Center
Part Number: AAT-661
Availability: In Stock
Price: $499.00
Order Quantity:
This .50 caliber Thompson Center Renegade Hunter is designed for the cold weather right hand hunter with a single trigger with a wide trigger bow for a gloved hand. This percussion rifle features a 26" long octagon barrel, walnut stock, blued steel furniture, and adjustable rear sight. This stock appears to have been refinished and the factory hammer has been replaced with an after market "quick cock hammer." The bore is bright and has been well maintained. Trigger reach is 13" to fit today's average size shooter, and the weight is 8.1 pounds.

The .50 caliber barrel is factory blued, 1" wide and 26" long. The bore is bright and has been well maintained. The barrel is mounted with the later style bead front sight. The rear sight is adjustable, with screw adjustable windage and elevation. The barrel's exterior bluing has some bright spots and brown speckling in the finish. We recommend our #BALL-490 Hornady pure lead .490" round ball, #OX-15-50-D Ox Yoke .015" dry patch, #MINK OIL tallow lubricant, 70 grains of #GOEX-FFg black powder, and a No. 11 percussion cap for best accuracy. If hunting big game, in thick brush, try our T/C Maxi Ball. Increase the powder charge as needed, to achieve best accuracy with this heavier bullet. Recoil will increase, but will not be noticed during the hunt.

The steel buttplate is nearly flat to help spread the felt recoil over a large area. The black walnut stock has been refinished and shows a few minor handling marks. The wooden ramrod is a replacement and the muzzle end is fitted with a blued steel tip threaded 10-32 for accessories. A blued sling swivel stud is mounted in the toe of the buttstock. A matching stud is fitted to the rear ramrod pipe for attaching a sling. No sling is included with this rifle. No cheek piece is carved on the T/C Renegade. The lock is retained by a single lock bolt with round, blued steel washer-style side plate.

The hooked breech allows the barrel to be easily dismounted for cleaning without risk of wetting the stock with water containing black powder residue. To dismount the barrel, put the lock on half cock, withdraw the ramrod, drift the keys past the underlugs, and the barrel can be lifted from the barrel channel for ease of cleaning. Remove the nipple and place the breech end of the barrel in a bucket of soapy water. Run a wet patch down and up the bore, the pumping action will flush all the fouling from the barrel. Once the bore is clean, run a dry patch down the bore to pick up any moisture followed by an oily patch. Dry and oil the exterior then reassemble the rifle.

Our lock view shows the color case hardened percussion lock, factory engraved by Thompson Center. This lock works smoothly, with a strong mainspring. The factory hammer has been replaced with an after market "quick cock hammer" with long thumb spur. The longer thumb spur on the quick cock hammer is recommended for a right hand shooter only, due to the position of the hammer. The breech is fitted with a 1/4-28 threaded stainless steel nipple. The single trigger provides a smooth release of the lock.

Used, this T/C Renegade rifle is designed for a right hand shooter and has a bore that is bright and well maintained. It is perfect for your next big game hunt. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

bullets, .50 caliber, Hornady Great Plains, 385 grain, pure lead, hollow base, hollow point, per 20
bullets, .50 caliber, Hornady Great Plains, 385 grain, pure lead, hollow base, hollow point, per 20
Part Number: BALL-50-385
Availability: Out of Stock, request notification when available.
Price: $11.25
  
bullets, .50 caliber, T/C Maxi-Ball, hand cast pure lead, about 378 grains, per 20
bullets, .50 caliber, T/C Maxi-Ball, hand cast pure lead, about 378 grains, per 20
Part Number: BALL-50-MAXI
Availability: In Stock
Price: $14.59
Order Quantity:
.490" round balls, pure lead, Hornady, per 100
.490" round balls, pure lead, Hornady, per 100
Part Number: BALL-490
Availability: Out of Stock, request notification when available.
Price: $14.39
  
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $4.19
Order Quantity:
Ball puller, steel screw, .50 caliber brass collar, 10-32 thread
Ball puller, steel screw, .50 caliber brass collar, 10-32 thread
Part Number: BP-50-10
Availability: In Stock
Price: $3.79
Order Quantity:
Bore brush, bronze, for .50 caliber, 10-32 thread
Bore brush, bronze, for .50 caliber, 10-32 thread
Part Number: BRUSH-50-10
Availability: In Stock
Price: $2.99
Order Quantity:
Brass Capper, for #11 caps, straight line, made in the USA, by Tedd Cash
Brass Capper, for #11 caps, straight line, made in the USA, by Tedd Cash
Part Number: CAPPER-P
Availability: In Stock
Price: $10.99
Order Quantity:
Fouling Scraper, flat face, brass, .50 caliber, 10-32 thread
Fouling Scraper, flat face, brass, .50 caliber, 10-32 thread
Part Number: FS-50-10
Availability: In Stock
Price: $4.09
Order Quantity:
Jag, jagged cleaning tip, brass, .50 caliber, 3/8 rod, 10-32 thread
Jag, jagged cleaning tip, brass, .50 caliber, 3/8 rod, 10-32 thread
Part Number: JS-50-6-10
Availability: In Stock
Price: $4.59
Order Quantity:
Powder measure, brass, adjustable 0 to 120 grains, with spout
Powder measure, brass, adjustable 0 to 120 grains, with spout
Part Number: MAS-120
Availability: In Stock
Price: $18.99
Order Quantity:
Trapper's MINK OIL TALLOW,
patch grease,
for match shooting & cold weather hunting,
one 8 oz. tin
Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin
Part Number: MINK-OIL
Availability: In Stock
Price: $7.49
Order Quantity:
Nipple Wrench for Rifles, short style, with slotted end
Nipple Wrench for Rifles, short style, with slotted end
Part Number: NW-160
Availability: In Stock
Price: $7.99
Order Quantity:
Shooting patches, .015" cotton, .50 - .59 caliber, per 100, dry
Shooting patches, .015" cotton, .50 - .59 caliber, per 100, dry
Part Number: OX-15-50-D
Availability: In Stock
Price: $3.70
Order Quantity:
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Part Number: OX-CLEAN-58C
Availability: In Stock
Price: $4.29
Order Quantity:
Ramrod, 3/8" hickory, 48" long, brass tip, 10-32 thread
Ramrod, 3/8" hickory, 48" long, brass tip, 10-32 thread
Part Number: RAMROD-6-10-B
Availability: In Stock
Price: $17.99
Order Quantity:
Ramrod for Thompson Center Renegade, Renegade Hunter, or Big Boar Rifle,
3/8" brown Delrin nylon, 26-5/8" long. Brass tips are threaded 10-32 at rear, 8-32 at front.

Made by Track of the Wolf, in our Elk River, Minnesota, we make the brass tips and assemble the ramrod.
Ramrod for Thompson Center Renegade, Renegade Hunter, or Big Boar Rifle, 3/8" brown Delrin nylon, 26-5/8" long. Brass tips are threaded 10-32 at rear, 8-32 at front. Made by Track of the Wolf, in our Elk River, Minnesota, we make the brass tips and assemble the ramrod.
Part Number: RAMROD-265-TC
Availability: In Stock
Price: $17.99
Order Quantity:
Our Strongest Loading & Cleaning Rod, 5/16" stainless, over 29" long for T/C Hawken, rigid handle, 10-32 thread
Our Strongest Loading & Cleaning Rod, 5/16" stainless, over 29" long for T/C Hawken, rigid handle, 10-32 thread
Part Number: RAMROD-C-29-10
Availability: In Stock
Price: $27.99
Order Quantity:
Short Starter, patch & ball starter, 7/16" hickory rod for .50 caliber.
Short Starter, patch & ball starter, 7/16" hickory rod for .50 caliber.
Part Number: ST-7
Availability: In Stock
Price: $7.99
Order Quantity:
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
Part Number: WORM-CORK-10
Availability: In Stock
Price: $6.89
Order Quantity:
Track's Catalog 18,
Out of Print
Please use our FREE on-line catalog and web site.
Track's Catalog 18, Out of Print Please use our FREE on-line catalog and web site.
Part Number: CATALOG-18
Availability: Book is no longer being printed or produced. Once we sell through our remaining inventory, item will no longer be available.  We will not be getting any more in.
Price: $10.00
  
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2021Track of the Wolf, Inc.
Accepted Credit Cards