Big Boar Rifle,
.58 caliber, 26" barrel,
percussion, walnut, iron trim, 7194 peep sight,
used, by Thompson Center Arms
Part Number: AAT-470
Availability: Item has been shipped out for inspection, and at this time, is NOT available. You can click "Notify Me" and enter your email address.  We will notify you IF this item becomes available again.
  
This used Thompson Center Big Boar .58 caliber percussion rifle is fitted with a hunter's peep sight. The rifle has a few small handling marks on the stock and barrel finish. The Big Boar was one of Thompson Center's later producion models designed for the large game hunter. This rifle is not fitted with the rubber recoil pad typically seen on this model. Weighing in at 7.8 pounds the rifle has a trigger reach of 13" making it well suited for today's average size shooter.

The .58 caliber bore is bright and clean. We recommend our #BALL-570 Hornady pure lead .570" round ball, #OX-15-50-D Ox Yoke .015" dry patch, #MINK OIL tallow lubricant, for best accuracy. The bluing has a few areas of light brown speckling in the finish. The right hand oblique flat of the barrel, forward of the breech, has been marked with the factory stampings. In two lines THOMPSON CENTER ARMS / ROCHESTER, NEW HAMPSHIRE can be seen followed by .58 CAL. BIG BOAR. Further markings including the serial number and “black powder only" warning can be found on the left hand flat. A factory bead sight is dovetailed directly behind the muzzle. The rear barrel sight has been removed and the holes are plugged with filler screws. A Thompson center 7194 hunter's peep sight is fitted to the tang of this rifle. The peep sight is windage and elevation adjustable.

Stocked in American black walnut, the wood has a few small scattered handling marks. An iron buttplate is fitted to this rifle, instead of the rubber recoil pad typically seen on Big Boar rifles. We believe the factory Big Boar barrel was later fitted to a standard TC Renegade Hunter stock. This rifle has a single trigger with large trigger guard bow to accept a gloved finger when hunting. A sling swivel stud is mounted in the toe of the buttstock. The rear ramrod pipe is fitted with a stud to mount a sling. No sling is included with this rifle. No cheek piece is carved on this T/C Big Boar rifle. The factory synthetic ramrod is fitted with 10-32 threads for loading and cleaning accessories.

The rifle is fitted with a hooked breech to simplify cleaning. To dismount the barrel place the lock at half cock, withdraw the ramrod, drift the wedge key past the underlug with our brass drift #TOOL-KEY-B. Once the wedge key is removed the barrel can be lifted from the stock. Remove the nipple and place the breech end of the barrel in a bucket of soapy water. Run a wet patch down and up the bore, the pumping action will flush all the fouling from the barrel. Once the bore is clean, run a dry patch down the bore to pick up any moisture followed by an oily patch. Dry and oil the exterior then reassemble the rifle.

Our lock view shows the color case hardened percussion lock, factory engraved by Thompson Center. This lock works smoothly, with a strong mainspring. The factory stainless steel nipple has been installed into the snail bolster to accept you #11 percussion caps. The trigger provides a smooth release of the lock.

In excellent condition this .58 caliber Big Boar rifle has a bright bore and few minor marks on the stock. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

bullets, .58 caliber, hand cast from a T/C Maxi-Ball mold, 600 grains, per 20
bullets, .58 caliber, hand cast from a T/C Maxi-Ball mold, 600 grains, per 20
Part Number: BALL-58-MAXI
Availability: In Stock
Price: $16.69
Order Quantity:
.570" round balls, pure lead, Hornady, per 50
.570" round balls, pure lead, Hornady, per 50
Part Number: BALL-570
Availability: Out of Stock, request notification when available.
Price: $10.09
  
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $4.19
Order Quantity:
Bore mop, 100% Cotton, for .58 caliber, 10-32 thread, washable
Bore mop, 100% Cotton, for .58 caliber, 10-32 thread, washable
Part Number: BORE-MOP-58-10
Availability: In Stock
Price: $3.19
Order Quantity:
Bore brush, bronze, for .58 caliber, 10-32 thread
Bore brush, bronze, for .58 caliber, 10-32 thread
Part Number: BRUSH-58-10
Availability: In Stock
Price: $2.99
Order Quantity:
Brass Capper, for #11 caps, straight line, made in the USA, by Tedd Cash
Brass Capper, for #11 caps, straight line, made in the USA, by Tedd Cash
Part Number: CAPPER-P
Availability: In Stock
Price: $10.99
Order Quantity:
Jag, jagged cleaning tip, brass, .58 caliber, 3/8" rod, 10-32 thread
Jag, jagged cleaning tip, brass, .58 caliber, 3/8" rod, 10-32 thread
Part Number: JS-58-6-10
Availability: In Stock
Price: $4.50
Order Quantity:
Trapper's MINK OIL TALLOW,
patch grease,
for match shooting & cold weather hunting,
one 8 oz. tin
Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin
Part Number: MINK-OIL
Availability: In Stock
Price: $6.99
Order Quantity:
Shooting patches, .015" cotton, .50 - .59 caliber, per 100, dry
Shooting patches, .015" cotton, .50 - .59 caliber, per 100, dry
Part Number: OX-15-50-D
Availability: Out of Stock, request notification when available.
Price: $3.70
  
Ramrod for Thompson Center Renegade, Renegade Hunter, or Big Boar Rifle,
3/8" brown Delrin nylon, 26-5/8" long. Brass tips are threaded 10-32 at rear, 8-32 at front.

Made by Track of the Wolf, in our Elk River, Minnesota, we make the brass tips and assemble the ramrod.
Ramrod for Thompson Center Renegade, Renegade Hunter, or Big Boar Rifle, 3/8" brown Delrin nylon, 26-5/8" long. Brass tips are threaded 10-32 at rear, 8-32 at front. Made by Track of the Wolf, in our Elk River, Minnesota, we make the brass tips and assemble the ramrod.
Part Number: RAMROD-265-TC
Availability: In Stock
Price: $17.99
Order Quantity:
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
Part Number: WORM-CORK-10
Availability: In Stock
Price: $6.89
Order Quantity:
Track's Catalog 18,
Out of Print
Please use our FREE on-line catalog and web site.
Track's Catalog 18, Out of Print Please use our FREE on-line catalog and web site.
Part Number: CATALOG-18
Availability: Book is no longer being printed or produced. Once we sell through our remaining inventory, item will no longer be available.  We will not be getting any more in.
Price: $10.00
  
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2021Track of the Wolf, Inc.
Accepted Credit Cards