Jim Bridger's Hawken Rifle,
.54 caliber, 36" tapered octagon barrel,
percussion, curly maple, iron trim, as-new
Part Number: AAS-666
Availability: In Stock
Price: $2,899.00
Order Quantity:
This Hawken half-stock rifle was built using Track's very best Jim Bridger's Hawken rifle parts. The rifle is well fitted and finished. This unmarked rifle is a conservative traditional Hawken rifle with classic shaping. Assembled using a .54 caliber tapered octagon barrel, this plains rifle will be ideal for large game hunting or silhouette match use. The barrel of this rifle has been bedded, but no bedding is visible on the exterior of the rifle. Trigger reach is 14=1/8", to fit a 6" or taller shooter. This half-stock plains rifle weighs 11 pounds. Recoil should be modest, thanks to the weight of the rifle.

The .54 caliber 1-1/8" tapered octagon 36" barrel gives this rifle a modest weight. The cut rifled bore has seven lands and grooves with a 1 in 66" twist for a patched round ball. Grooves are cut .016" deep. Rice Muzzle Loading Rifle Barrels are set between centers and milled octagonal, insuring a centered bore, concentric with the exterior, with no "run-out". Each barrel is stress relieved in an atmosphere controlled electric furnace, to eliminate work hardening or barrel warp, and to dampen harmonic vibrations or barrel whip.

After the rifling has been cut, each bore is "ball burnished". A carbide bore-sizing die is pulled through the barrel, to insure bore dimension uniformity, eliminating any tight or loose spots inside the barrel. This critical procedure leaves the top of the lands smooth and polished, equaling the traditional lead lapping procedure. Rice barrels are Match grade quality, with bench rest capability. Rice barrels do not require lapping or extensive shooting to break-in.The smooth chocolate brown finish of the barrel, lock, and iron furniture appears as new.

The rifle is stocked in curly maple finished to a high gloss and trimmed in browned iron furniture. The metal to wood fit is very well done. The long tang of the slanted hooked breech strengthens the wrist. The tang bolts are neatly fitted with the slots aligned. Lock panels taper widest at the front is late percussion fashion. The hooked breech allows the barrel to be easily dismounted for cleaning without wetting the stock. Two keys retain the barrel. Remove the keys with firm pressure, and withdraw the ramrod, before lifting the barrel from its mortise. The barrel channel is bedded and is a snug fit.

The iron toeplate protects the toe, ending in the traditional beaver tail finial. The long trigger bar, anchored to the long tang with two tang bolts, supports and re-enforces the wrist. Hawken rifles quickly became famous for reliability in the Rocky Mountains. The forend is fitted with a conservative browned iron forend cap, and matching iron ramrod entry pipe. There is a small gap between the forend cap and the rear of the underrib. The snugly fitted tapered hickory ramrod is well finished, with an steel tip threaded 10-32 to accept your cleaning jag or patch worm. The single lock bolt, and tear drop escutcheon around it, are classic features of a halfstock Hawken plains rifle, from the 1835 - 1845 era. The beaver tail shaped cheek piece adds comfort for a right hand shooter, while aiming this .54 caliber rifle. The balance point is under the ramrod entry pipe.

Ron Long, of Denver, recreated the T. Gibbons Hawken percussion lock, for the Green River Rifle Works of Roosevelt, Utah. Assembled and tuned by R. E. Davis, this example is fitted with a English style hammer. Polished inside, the well tempered parts include a strong mainspring, stirrup link, and a fly detent to allow set triggers. R.E. Davis double lever double set triggers fire set or unset, for target match shooting, or cold weather hunting with gloved fingers. Turn the set screw, between the two triggers, inboard to decrease the set trigger pressure.

Unmarked on the outer surfaces, as most serious re-enactors prefer, this rifle is a pure pleasure to handle. Rest shooting is ideal, since the heavy weight absorbs recoil. The 100 yard and 130 yard Buffalo X-Sticks Match targets are not far away for this big .54 caliber round ball. If you are considering adding a well fitted Hawken rifle to your collection consider this rifle. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

.530" round balls, pure lead, Hornady, per 100
.530" round balls, pure lead, Hornady, per 100
Part Number: BALL-530
Availability: In Stock
Price: $15.29
Order Quantity:
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $3.99
Order Quantity:
Ball puller, steel screw, .54 caliber brass collar, 10-32 thread
Ball puller, steel screw, .54 caliber brass collar, 10-32 thread
Part Number: BP-54-10
Availability: In Stock
Price: $3.75
Order Quantity:
Bore brush, bronze, for .54 caliber, 10-32 thread
Bore brush, bronze, for .54 caliber, 10-32 thread
Part Number: BRUSH-54-10
Availability: In Stock
Price: $2.99
Order Quantity:
Powder Flask,
brass body, brass dispensing valve,
embossed Diamond or Basket Weave pattern
accepts 10-1mm threaded spouts
Powder Flask, brass body, brass dispensing valve, embossed Diamond or Basket Weave pattern accepts 10-1mm threaded spouts
Part Number: FLASK-DIAMOND
Availability: Out of Stock, request notification when available.
Price: $44.99
  
Flush Nipple,
1/4-28 thread,
stainless steel, with 1/4" square shank for nipple wrench,
with tubing, fits Thompson Center
Flush Nipple, 1/4-28 thread, stainless steel, with 1/4" square shank for nipple wrench, with tubing, fits Thompson Center
Part Number: FLUSH-RST
Availability: In Stock
Price: $4.29
Order Quantity:
Fouling Scraper, flat face, brass, .54 caliber, 10-32 thread
Fouling Scraper, flat face, brass, .54 caliber, 10-32 thread
Part Number: FS-54-10
Availability: In Stock
Price: $3.79
Order Quantity:
Jag, jagged cleaning tip, brass, .54 caliber, 7/16" rod, 10-32 thread
Jag, jagged cleaning tip, brass, .54 caliber, 7/16" rod, 10-32 thread
Part Number: JS-54-7-10
Availability: In Stock
Price: $4.25
Order Quantity:
Powder measure, brass, adjustable 0 to 120 grains, with spout
Powder measure, brass, adjustable 0 to 120 grains, with spout
Part Number: MAS-120
Availability: In Stock
Price: $14.99
Order Quantity:
Trapper's MINK OIL TALLOW,
patch grease,
for match shooting & cold weather hunting,
one 8 oz. tin
Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin
Part Number: MINK-OIL
Availability: In Stock
Price: $6.99
Order Quantity:
Shooting patches, .015" cotton, .50 - .59 caliber, per 100, dry
Shooting patches, .015" cotton, .50 - .59 caliber, per 100, dry
Part Number: OX-15-50-D
Availability: In Stock
Price: $3.29
Order Quantity:
Shooting patches, .018" pillow ticking, .50 - .59 caliber, per 100, dry
Shooting patches, .018" pillow ticking, .50 - .59 caliber, per 100, dry
Part Number: OX-18-50-D
Availability: In Stock
Price: $3.59
Order Quantity:
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Part Number: OX-CLEAN-58C
Availability: In Stock
Price: $3.89
Order Quantity:
Ramrod, 3/8" hickory, 48" long, brass tip, 10-32 thread
Ramrod, 3/8" hickory, 48" long, brass tip, 10-32 thread
Part Number: RAMROD-6-10-B
Availability: In Stock
Price: $15.99
Order Quantity:
Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, stainless steel
Cone length 0.440"Overall length: 0.635" Thread journal length: 0.195" Diameter of base: 0.307"
Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, stainless steel
  • Cone length 0.440"
  • Overall length: 0.635"
  • Thread journal length: 0.195"
  • Diameter of base: 0.307"
Part Number: RST-S
Availability: In Stock
Price: $4.99
Order Quantity:
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
Part Number: WORM-CORK-10
Availability: In Stock
Price: $6.59
Order Quantity:
Track's Catalog 18,
Out of Print
Please use our FREE on-line catalog and web site.
Track's Catalog 18, Out of Print Please use our FREE on-line catalog and web site.
Part Number: CATALOG-18
Availability: Book is no longer being printed or produced. Once we sell through our remaining inventory, item will no longer be available.  We will not be getting any more in.
Price: $10.00
  
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2020Track of the Wolf, Inc.
Accepted Credit Cards