Thompson Center Hawken Rifle,
.45 caliber, 28" barrel,
percussion, walnut stock, brass trim,
used, by Thompson Center Arms
Part Number: AAS-574
Availability: In Stock
Price: $499.00
Order Quantity:
This Thompson Center Hawken rifle is used with handling marks on the stock and blue barrel finish. The brass has darkened from long storage. The rifle is stocked in American black walnut and the barrel has been factory finished to a dark blue. The large percussion lock has been color case hardened. Trigger reach is 14-1/4" to fit today's average size shooter. Weight is 8.2 pounds.

The factory polished blued barrel is .45 caliber, 15/16" octagon, 28" length. The barrel has marks from use and speckling running its entire length. The front sight is Thompson Center's blued steel bead sight. The rear sight is click adjustable for elevation, and screw adjustable for windage. In excellent condition, the bore is bright and clean, with crisp rifling grooves. We recommend our .440" round ball, .015" patch, and Mink Oil tallow patch lubricant, over a charge of 60 grains of GOEX FFg black powder. This rifle pre-dates the QLA muzzle and the bore is rifled all the way to the end of the muzzle.

The American black walnut stock has many small scattered handling marks and a few bigger dings, but no cracks or chips. The buttplate, patchbox, nosecap, and triggerguard are brass, which has aged to a mellow patina from long storage. Our top view shows the hooked breech of the barrel, which can be dismounted by removing the ramrod and wedge key, for easy cleaning. This rifle is fitted with the earlier style three hole tang. A bullseye style escutcheon plate surrounds the single bolt. Further back on the rifle the standard beaver tail cheek can be seen, standard issue on T/C rifles. The ramrod is fitted with brass tips, and the hidden end is threaded to accept 10-32 cleaning and loading accessories.

Our lock view shows the color case hardened percussion lock, factory engraved by Thompson Center. This lock works smoothly, with a strong mainspring, and fly detent to allow the use of double set triggers. Correctly adjusted, you may cock the lock, or set the trigger, in any sequence. Turn the tiny set trigger adjustment screw, between the two triggers, inboard to reduce the set trigger release tension. Or turn it fully inboard, to disable the set trigger feature, when hunting in very cold climates, where a numb finger might release the light set trigger too early.

The bore is bright and this rifle is ready to shoot. It will serve you well in the woods this Fall or at the range! Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

The invite trades, and we buy T/C guns. If you have a used Thompson Center Seneca, Hawken, Cherokee, Renegade, Patriot Pistol, New Englander, or other muzzle loading side hammer rifle, please consider our service when you are ready to sell. Our customers like these well made American guns, for their reliable service, durable reputation, accuracy, and good value. Order this gun today!

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

bullets, .45 caliber, T/C Maxi-Ball, 245 grain, per 20
bullets, .45 caliber, T/C Maxi-Ball, 245 grain, per 20
Part Number: BALL-45-MAXI
Availability: In Stock
Price: $9.29
Order Quantity:
.440" round balls, pure lead, Hornady, per 100
.440" round balls, pure lead, Hornady, per 100
Part Number: BALL-440
Availability: In Stock
Price: $10.29
Order Quantity:
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $3.99
Order Quantity:
Ball puller, steel screw, .45 caliber brass collar, 10-32 thread
Ball puller, steel screw, .45 caliber brass collar, 10-32 thread
Part Number: BP-45-10
Availability: In Stock
Price: $3.50
Order Quantity:
Bore brush, bronze, for .45 caliber, 10-32 thread
Bore brush, bronze, for .45 caliber, 10-32 thread
Part Number: BRUSH-45-10
Availability: In Stock
Price: $2.99
Order Quantity:
Brass Capper, for #11 caps, straight line, made in the USA, by Tedd Cash
Brass Capper, for #11 caps, straight line, made in the USA, by Tedd Cash
Part Number: CAPPER-P
Availability: In Stock
Price: $10.99
Order Quantity:
Nipple, Hot Shot® for Thompson Center Hawken & other popular guns, 1/4-28 thread, #11 CCI cap, stainless steel

Cone length: 0.440" Thread journal length: 0.195" Overall length: 0.635" Diameter of base: 0.307"
Nipple, Hot Shot® for Thompson Center Hawken & other popular guns, 1/4-28 thread, #11 CCI cap, stainless steel
  • Cone length: 0.440"
  • Thread journal length: 0.195"
  • Overall length: 0.635"
  • Diameter of base: 0.307"
Part Number: HOT-SHOT-RST
Availability: In Stock
Price: $6.99
Order Quantity:
Jag, jagged cleaning tip, brass, .45 caliber, 3/8 rod, 10-32 thread
Jag, jagged cleaning tip, brass, .45 caliber, 3/8 rod, 10-32 thread
Part Number: JS-45-6-10
Availability: In Stock
Price: $4.25
Order Quantity:
Powder measure, brass, adjustable 0 to 120 grains, with spout
Powder measure, brass, adjustable 0 to 120 grains, with spout
Part Number: MAS-120
Availability: In Stock
Price: $14.99
Order Quantity:
Trapper's MINK OIL TALLOW,
patch grease,
for match shooting & cold weather hunting,
one 8 oz. tin
Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin
Part Number: MINK-OIL
Availability: In Stock
Price: $6.99
Order Quantity:
Shooting patches, .015" cotton, .40 - .49 caliber, per 100, dry
Shooting patches, .015" cotton, .40 - .49 caliber, per 100, dry
Part Number: OX-15-40-D
Availability: In Stock
Price: $3.19
Order Quantity:
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Part Number: OX-CLEAN-58C
Availability: In Stock
Price: $3.89
Order Quantity:
Ramrod, 3/8" hickory, 48" long, brass tip, 10-32 thread
Ramrod, 3/8" hickory, 48" long, brass tip, 10-32 thread
Part Number: RAMROD-6-10-B
Availability: In Stock
Price: $15.99
Order Quantity:
Ramrod for Thompson Center Hawken, Cabela's Hawken, Investarm Hawken,
3/8" dark brown Delrin nylon, 28-5/8", flared brass tip, threaded 8-32 at front, 10-32 at rear. 

Made in the USA by Track of the Wolf, Elk River, Minnesota.
Ramrod for Thompson Center Hawken, Cabela's Hawken, Investarm Hawken, 3/8" dark brown Delrin nylon, 28-5/8", flared brass tip, threaded 8-32 at front, 10-32 at rear. Made in the USA by Track of the Wolf, Elk River, Minnesota.
Part Number: RAMROD-285-TC
Availability: Item is currently sold out.
Price: $16.99
Order Quantity:
  
Our Strongest Loading & Cleaning Rod, 5/16" stainless, over 29" long for T/C Hawken, rigid handle, 10-32 thread
Our Strongest Loading & Cleaning Rod, 5/16" stainless, over 29" long for T/C Hawken, rigid handle, 10-32 thread
Part Number: RAMROD-C-29-10
Availability: In Stock
Price: $25.99
Order Quantity:
Short Starter, patch & ball starter, with 3/8" hickory rod for .40 to .45 caliber.
Short Starter, patch & ball starter, with 3/8" hickory rod for .40 to .45 caliber.
Part Number: ST-6
Availability: In Stock
Price: $6.99
Order Quantity:
Vent,
Touch Hole Liner, for Thompson Center flintlock rifles, 1/4-28 thread, stainless steel,
slotted for easy removal
Vent, Touch Hole Liner, for Thompson Center flintlock rifles, 1/4-28 thread, stainless steel, slotted for easy removal
Part Number: THL-TCF
Availability: In Stock
Price: $4.99
Order Quantity:
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
Part Number: WORM-CORK-10
Availability: In Stock
Price: $6.59
Order Quantity:
Track's Catalog 18,
Out of Print
Please use our FREE on-line catalog and web site.
Track's Catalog 18, Out of Print Please use our FREE on-line catalog and web site.
Part Number: CATALOG-18
Availability: Book is no longer being printed or produced. Once we sell through our remaining inventory, item will no longer be available.  We will not be getting any more in.
Price: $10.00
  
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2020Track of the Wolf, Inc.
Accepted Credit Cards