Early Hawken Rifle
.54 caliber 35" barrel, iron trim,
curly maple with "dragon's blood" stain,
L&R flint & percussion locks, used
Part Number: AAS-374
Availability: In Stock
Price: $2,699.00
Order Quantity:
This Hawken rifle is stocked in maple with a dark red "dragons blood" color. The L&R Ashmore style flintlock has the appropriate 1820's to 1830's era appearance. The rifle also includes a matching L&R percussion lock, drum and nipple for conversion. The rifle is trimmed in traditional iron furniture, all of which has been finished to a dark brown. Weighing in at 9.8 pounds the fullstock rifle has a trigger reach of 13-1/2 making the gun well suited for today's average size shooter.

The Green Mountain .54 caliber 35" barrel is 1" straight octagon. The .54 caliber bore is rifled with eight equal lands and grooves with a 1 in 70" twist for a tightly patched round ball. We recommend our .530" pure lead round ball, patched with .015" Ox-Yoke patching, lubricated with our Mink Oil tallow patch grease, if you require best accuracy. Green Mountain Muzzle Loading Rifle Barrels are machined from high quality American made bar stock, A.I.S.I. 1137 modified, stress relieved, annealed, certified rifle barrel quality steel. All barrels are drilled from solid stock, reamed to a high degree of smoothness, then optically checked for straightness. Very close tolerances are maintained. The barrel is fitted with a thick steel blade front sight and a semi-buckhorn rear sight dovetailed 9" ahead of the breech. The top flat is stamped J&S Hawken St. Louis.

This Hawken fullstock is correctly trimmed entirely in traditional iron furniture. The modestly curved early buttplate, will help to minimize the recoil from the .54 caliber bore. Metal to wood fit on the buttplate is fair with some gaps visible near the toe of the stock. The maple stock has randomly spaced figure over the length of the stock. The barrel is fitted with an early style square hooked breech and tang. To remove the barrel; place the lock at half cock and close the frizzen, drift the wedge keys clear of the underlugs using a small brass drift, then lift the barrel muzzle end of the barrel up away from the stock. The tang of the hooked breech as two small tapped holes with filler screws installed, as if it had a tang sight mounted in the past. The wedge keys have large oval flat heads and the opposite end extends well past the eschuchoeon plates. The stock has developed a crack through the forward right hand side eschucheon plate with an overall length of 2-1/4".

Our bottom view shows the classic pointed Hawken toeplate. Early Hawken double set triggers, by L&R, are made with very long trigger bar. Two screws enter from the long steel tang, re-enforcing the wrist from above and below. This was a desirable feature for a Mountain Man, when trapping in Colorado. The 7/16" diameter hickory ramrod is held in place by classic Hawken browned iron ramrod pipes. The forward pipe is loose and has some play. The skirt of the ramrod entry pipe stands proud of the mortise. The ramrod is fitted with a steel tip threaded 8-32 for loading and cleaning accessories. An iron muzzle cap protect the end grain of the stock. Fit is only fair with a visible gap along the rear edge. The stock is shaped with an early square cheek piece. The lock bolt is surrounded by a tear drop sideplatel.

Sure-fire ignition is assured. This fine Hawken flint rifle is fitted with L&R's best Ashmore late English style flint lock. Finished to a dark brown tone that contrasts nicely with the maple stock. The lock is fitted with a goose neck single throated cock, waterproof pan with drains on either side, and the frizzen spring has a roller bearing, for fast lock action. We recommend our #FLINT-ENG-6 3/4" knapped English flints for best performance. The stainless steel touch hole liner brings the main charge very close to the priming flash. This vent is perfectly centered over the pan, correctly positioned to find the hottest center of the ignition flash. The rifle also includes a L&R percussion lock with drum and nipple for conversion to percussion.

The Hawken double set triggers, by L&R , are made with very long trigger bar. The triggers are properly tuned to fire from the set, or unset position. You can cock the lock before or after setting the triggers. Adjust the screw between the two triggers, inboard to reduce set trigger release pressure, our outboard to require a stronger pressure. When screwed fully inboard, the adjustment screw disables the rear trigger, so the rifle must be fired from the front trigger, which requires about a four pound pull for release. It is wise to disable the rear trigger, when hunting in very cold weather. But the set trigger can provide very light release, perhaps an ounce or two, for accurate aimed shooting during pleasant weather.

A Hawken fullstock with both flintlock and percussion ignition. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

.530" round balls, pure lead, Hornady, per 100
.530" round balls, pure lead, Hornady, per 100
Part Number: BALL-530
Availability: In Stock
Price: $15.29
Order Quantity:
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $3.99
Order Quantity:
Ball puller, steel screw, .54 caliber brass collar, 8-32 thread
Ball puller, steel screw, .54 caliber brass collar, 8-32 thread
Part Number: BP-54-8
Availability: In Stock
Price: $3.75
Order Quantity:
Flint priming flask, throws about 3 grains, brass
Flint priming flask, throws about 3 grains, brass
Part Number: FLASK-PP-3
Availability: In Stock
Price: $14.99
Order Quantity:
English gun flint, 3/4 x 7/8", standard rifle, large Siler, L&R, most others
English gun flint, 3/4 x 7/8", standard rifle, large Siler, L&R, most others
Part Number: FLINT-ENG-6
Availability: In Stock
Price: $2.20
Order Quantity:
Pack of 12 English Gun flints, 3/4 x 7/8", standard rifle, large Siler, L&R, most others
Pack of 12 English Gun flints, 3/4 x 7/8", standard rifle, large Siler, L&R, most others
Part Number: FLINT-ENG-6-PACK-12
Availability: In Stock
Price: $22.00
Order Quantity:
Flush Nipple,
1/4-28 thread,
stainless steel, with 1/4" square shank for nipple wrench,
with tubing, fits Thompson Center
Flush Nipple, 1/4-28 thread, stainless steel, with 1/4" square shank for nipple wrench, with tubing, fits Thompson Center
Part Number: FLUSH-RST
Availability: In Stock
Price: $4.29
Order Quantity:
Fouling Scraper, flat face, brass, .54 caliber, 8-32 thread
Fouling Scraper, flat face, brass, .54 caliber, 8-32 thread
Part Number: FS-54-8
Availability: In Stock
Price: $3.79
Order Quantity:
Powder Horn,
large, 11 to 14",
with antique patina finish
Powder Horn, large, 11 to 14", with antique patina finish
Part Number: HORN-A-L
Availability: In Stock
Price: $69.99
Order Quantity:
Priming Horn,
small, 4 to 5",
with antique patina finish
Priming Horn, small, 4 to 5", with antique patina finish
Part Number: HORN-A-S
Availability: In Stock
Price: $57.99
Order Quantity:
Jag, jagged cleaning tip, brass, .54 caliber, 7/16" rod, 8-32 thread
Jag, jagged cleaning tip, brass, .54 caliber, 7/16" rod, 8-32 thread
Part Number: JS-54-7-8
Availability: In Stock
Price: $4.25
Order Quantity:
Powder measure, brass, adjustable 0 to 120 grains, with spout
Powder measure, brass, adjustable 0 to 120 grains, with spout
Part Number: MAS-120
Availability: In Stock
Price: $14.99
Order Quantity:
Trapper's MINK OIL TALLOW,
patch grease,
for match shooting & cold weather hunting,
one 8 oz. tin
Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin
Part Number: MINK-OIL
Availability: In Stock
Price: $6.99
Order Quantity:
Shooting patches, .018" pillow ticking, .50 - .59 caliber, per 100, dry
Shooting patches, .018" pillow ticking, .50 - .59 caliber, per 100, dry
Part Number: OX-18-50-D
Availability: In Stock
Price: $3.59
Order Quantity:
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Part Number: OX-CLEAN-58C
Availability: In Stock
Price: $3.89
Order Quantity:
Pick & Pan Brush,
with brass chain, button clasp,
and black bristle brush,
for flint musket, rifle, or fowler
Pick & Pan Brush, with brass chain, button clasp, and black bristle brush, for flint musket, rifle, or fowler
Part Number: PICK-BRUSH-H
Availability: In Stock
Price: $13.99
Order Quantity:
Forged steel vent pick,
2-1/2" long, for rifle
Forged steel vent pick, 2-1/2" long, for rifle
Part Number: PICK-VENT-2
Availability: In Stock
Price: $2.99
Order Quantity:
Ramrod, 7/16" hickory, 48" long, brass tip, 8-32 thread
Ramrod, 7/16" hickory, 48" long, brass tip, 8-32 thread
Part Number: RAMROD-7-8-B
Availability: In Stock
Price: $15.99
Order Quantity:
Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, stainless steel
Cone length 0.440"Overall length: 0.635" Thread journal length: 0.195" Diameter of base: 0.307"
Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, stainless steel
  • Cone length 0.440"
  • Overall length: 0.635"
  • Thread journal length: 0.195"
  • Diameter of base: 0.307"
Part Number: RST-S
Availability: In Stock
Price: $4.99
Order Quantity:
Short Starter, patch & ball starter, 1/2" wooden rod for .54 and larger calibers.
Short Starter, patch & ball starter, 1/2" wooden rod for .54 and larger calibers.
Part Number: ST-8
Availability: In Stock
Price: $6.99
Order Quantity:
Timothy Pickering's Tool,
medium size, for flint rifles & fowling guns,
the first U. S. issue gun tool,
designed by our first U. S. Quartermaster
Timothy Pickering's Tool, medium size, for flint rifles & fowling guns, the first U. S. issue gun tool, designed by our first U. S. Quartermaster
Part Number: TOOL-PICK-M
Availability: In Stock
Price: $11.99
Order Quantity:
Primitive Rifleman's Turn Screw, hand forged tempered steel screwdriver, to fit in a longrifle patchbox
Primitive Rifleman's Turn Screw, hand forged tempered steel screwdriver, to fit in a longrifle patchbox
Part Number: TOOL-TURN-U
Availability: In Stock
Price: $6.99
Order Quantity:
Patch puller, corkscrew worm, steel, brass base, 8-32 thread
Patch puller, corkscrew worm, steel, brass base, 8-32 thread
Part Number: WORM-CORK-8
Availability: In Stock
Price: $6.59
Order Quantity:
Track's Catalog 18,
Out of Print
Please use our FREE on-line catalog and web site.
Track's Catalog 18, Out of Print Please use our FREE on-line catalog and web site.
Part Number: CATALOG-18
Availability: Book is no longer being printed or produced. Once we sell through our remaining inventory, item will no longer be available.  We will not be getting any more in.
Price: $10.00
  
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2020Track of the Wolf, Inc.
Accepted Credit Cards