Parker Hale 1858 Enfield Rifled Musket,
.58 caliber, 33" barrel,
percussion, walnut, brass, two band, sword bayonet,
used, by Parker Hale, Birmingham, England
Part Number: AAS-263
Availability: Item has been shipped out for inspection, and at this time, is NOT available. You can click "Notify Me" and enter your email address.  We will notify you IF this item becomes available again.
  
This Parker Hale replica 1858 Enfield .58 caliber two band musket was manufactured in England, current reproductions of this rifle are made in Italy. Designed to shoot our .577 caliber Pritchard style Minie bullet, #BALL-57-MINIE, from the now discontinued #LYMAN-577-611 bullet mold. Enfield muskets were imported and issued by both the North and the South. The Confederacy purchased Enfield muskets from neutral England, and brought them into the south, at great risk, aboard the blockade runners. This replica rifled musket is offered in used condition with a bright well maintained bore, and a few handling marks on the stock. A sword bayonet in a black leather scabbard is also included. The rifle has a trigger reach of 14" and weighs 8.9 pounds.

The tapered round 33" barrel, including the breech plug, is rifled with narrow lands and wide grooves, exactly like the original musket. The bore is bright, well maintained, and ready to shoot. Nicely polished and blued, the blue black finish shows scratches around the breech from removing the nipple, and has scratches near the muzzle from attaching the bayonet. The bayonet lug mounted 4" behind the muzzle has been filed to accommodate the sword bayonet and was left bright. The barrel is tapered round, with a distinct flat at the breech, which makes a smooth transition to the tang. The top flat is stamped with the modern English black powder proof mark. The top of the barrel is marked PARKER-HALE LTD. BIRMINGHAM ENGLAND.

The Enfield rifled musket, and the special hollow base Minie bullet that allowed quick reloading, achieved fine accuracy, and much longer range than the round ball muskets of an earlier generation. The rear sight is calibrated and marked in 100 yard increments, up to 1100 yards. We note the rear sight has been modified for windage screw adjustment and the ladder has been milled thinner to provide maximum adjustment for a serious shooter. The screw and sides of the ladder were left bright. The front post sight is painted red for better visibility.

Unlike U. S. Springfield muskets, the Enfield musket is trimmed in brass. Stocked in walnut, the stock has a rich dark brown color and shows handling marks and small dents from field use. The brass buttplate and triggerguard are retained with blued steel screws, as original. The center of the buttstock is stamped clearly with the PARKER HALE LTD cartouche. The brass triggerguard is fitted with a correct swivel for a military style leather sling. Sling is not included. The brass trim has tarnished due to use and long storage. A sling swivel is mounted to the front barrel band. The correct steel military ramrod easily slides through the barrel bands and into the stock. The hidden end is threaded with a very shallow 8-32 thread to accept cleaning and loading accessories.

The color case hardened lock has the classic Enfield shaped percussion hammer. The top of the hammer is checkered for a sure grip when cocking. The lock plate is marked with a crown over PH on the tail, and 1858 over Enfield. This Enfield rifled musket is fitted with a correct 5/16-18 threaded Enfield musket nipple, exactly as on the original. The mainspring on this percussion lock is very strong and has a smooth trigger release. Two brass sideplate washers are inlet just below the side panel of the stock, and counter bored to accept the two bolts that retain the lock.

A sword bayonet is also included with this rifle. The blade measures 23-1/4" long and the overall length with the handle is 28-1/4". The blade is not sharpened and is marked India. The spring in the handle tightly secures the bayonet to the barrel lug. The sword bayonet easily slides on the barrel when mounting. The bayonet comes with a black leather scabbard.

This is an early production Parker Hale musket, made in England. These early rifles are fitted and finished much better than the current production Parker Hale rifles made in Italy. This nice well maintained Enfield musket will be appreciated by a Civil War reenactor. Both sides prized the English Enfield musket. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

bullets, .57 caliber, Minie, Enfield .577", Lyman 577-611, 530 grain, pure lead, hollow base, per 25
bullets, .57 caliber, Minie, Enfield .577", Lyman 577-611, 530 grain, pure lead, hollow base, per 25
Part Number: BALL-57-MINIE
Availability: In Stock
Price: $17.99
Order Quantity:
bullets, .58 caliber, Minie, Springfield .575", Lyman 575-213, 510 grain, pure lead, hollow base, per 25
bullets, .58 caliber, Minie, Springfield .575", Lyman 575-213, 510 grain, pure lead, hollow base, per 25
Part Number: BALL-58-MINIE
Availability: In Stock
Price: $17.99
Order Quantity:
.570" round balls, pure lead, Hornady, per 50
.570" round balls, pure lead, Hornady, per 50
Part Number: BALL-570
Availability: In Stock
Price: $8.99
Order Quantity:
Bayonet
for Enfield Rifled Musket,
with scabbard, 18" triangular blade
Bayonet for Enfield Rifled Musket, with scabbard, 18" triangular blade
Part Number: BAYONET-ENFIELD
Availability: In Stock
Price: $84.99
Order Quantity:
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $3.99
Order Quantity:
Ball puller, steel screw, .58 caliber brass collar, 10-32 thread
Ball puller, steel screw, .58 caliber brass collar, 10-32 thread
Part Number: BP-58-10
Availability: In Stock
Price: $3.75
Order Quantity:
Bore brush, bronze, for .58 caliber, 10-32 thread
Bore brush, bronze, for .58 caliber, 10-32 thread
Part Number: BRUSH-58-10
Availability: In Stock
Price: $2.99
Order Quantity:
Nipple, 5/16-18 thread, for English mfg. Parker Hale Enfield musket, musket cap, hardened steel, 1/4" square lug,

Cone length: 0.475" Thread journal length: 0.275" Overall length: 0.750" Diameter of base: 0.370"
Nipple, 5/16-18 thread, for English mfg. Parker Hale Enfield musket, musket cap, hardened steel, 1/4" square lug,
  • Cone length: 0.475"
  • Thread journal length: 0.275"
  • Overall length: 0.750"
  • Diameter of base: 0.370"
Part Number: EMS-I
Availability: In Stock
Price: $7.99
Order Quantity:
Nipple, 5/16-18 thread, for English mfg. Parker Hale Enfield musket, musket cap, stainless steel, 1/4" square lug

Cone length: 0.475" Thread journal length: 0.275" Overall length: 0.750" Diameter of base: 0.370"
Nipple, 5/16-18 thread, for English mfg. Parker Hale Enfield musket, musket cap, stainless steel, 1/4" square lug
  • Cone length: 0.475"
  • Thread journal length: 0.275"
  • Overall length: 0.750"
  • Diameter of base: 0.370"
Part Number: EMS-SQ-S
Availability: In Stock
Price: $7.99
Order Quantity:
Powder Flask,
U. S. Model 1855
Peace & Friendship,
brass, with lanyard rings
accepts 10-1mm threaded spouts
Powder Flask, U. S. Model 1855 Peace & Friendship, brass, with lanyard rings accepts 10-1mm threaded spouts
Part Number: FLASK-PEACE
Availability: Out of Stock, request notification when available
Price: $45.99
  
Fouling Scraper, flat face, brass, .58 caliber, 10-32 thread
Fouling Scraper, flat face, brass, .58 caliber, 10-32 thread
Part Number: FS-58-10
Availability: In Stock
Price: $4.79
Order Quantity:
Jag, jagged cleaning tip, brass, .58 caliber, 7/16" rod, 10-32 thread
Jag, jagged cleaning tip, brass, .58 caliber, 7/16" rod, 10-32 thread
Part Number: JS-58-7-10
Availability: In Stock
Price: $4.50
Order Quantity:
SPG Bullet Lubricant,
one 1-1/4 ounce stick, for Black or Smokeless Powder
SPG Bullet Lubricant, one 1-1/4 ounce stick, for Black or Smokeless Powder
Part Number: LUBE-SPG
Availability: In Stock
Price: $4.49
Order Quantity:
Nipple Wrench for Muskets,
with slotted socket, for square or flat side nipples
Nipple Wrench for Muskets, with slotted socket, for square or flat side nipples
Part Number: NW-100
Availability: In Stock
Price: $6.99
Order Quantity:
Shooting patches, .015" cotton, .50 - .59 caliber, per 100, dry
Shooting patches, .015" cotton, .50 - .59 caliber, per 100, dry
Part Number: OX-15-50-D
Availability: In Stock
Price: $3.29
Order Quantity:
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Part Number: OX-CLEAN-58C
Availability: In Stock
Price: $3.89
Order Quantity:
Ramrod, 7/16" hickory, 48" long, brass tip, 10-32 thread
Ramrod, 7/16" hickory, 48" long, brass tip, 10-32 thread
Part Number: RAMROD-7-10-B
Availability: In Stock
Price: $15.99
Order Quantity:
Adaptor for military rod, 
Japanese musket or Colt 1861 Signature Series Special Musket,
female 12-24 to 10-32 female
Adaptor for military rod, Japanese musket or Colt 1861 Signature Series Special Musket, female 12-24 to 10-32 female
Part Number: SA-10-JAPAN
Availability: Item is currently sold out.
Price: $2.99
Order Quantity:
  
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
Part Number: WORM-CORK-10
Availability: In Stock
Price: $6.59
Order Quantity:
Track's Catalog 18,
Out of Print
Please use our FREE on-line catalog and web site.
Track's Catalog 18, Out of Print Please use our FREE on-line catalog and web site.
Part Number: CATALOG-18
Availability: Book is no longer being printed or produced. Once we sell through our remaining inventory, item will no longer be available.  We will not be getting any more in.
Price: $10.00
  
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2019Track of the Wolf, Inc.
Accepted Credit Cards