Thompson Center Renegade,
.54 caliber, 26" barrel,
percussion, walnut stock, iron trim,
used, from a kit by Thompson Center Arms
Part Number: AAS-245
Availability: In Stock
Price: $299.00
Order Quantity:
This Thompson Center Renegade .54 caliber percussion rifle has been assembled from a kit. The rifle is offered in used condition with handling marks on the stock and metal. The barrel is mostly bright, but does have pitting running throughout its length, with darker areas near the muzzle. The barrel exterior also has a fair amount of speckling and pitting, mostly near the muzzle. Trigger reach is 13-1/2" and the weight is 8.0 pounds, making the rifle set up for today's average size shooter.

The .54 caliber, 1" octagon barrel is 26" in length. The bore is mostly bright, but does have light pitting throughout and darker areas near the muzzle. The barrel is fitted with a partridge style front sight and square notched adjustable rear sight for windage and elevation. The back of the front sight has been painted orange for better visibility. The barrel assembly is from a kit as indicated by the "K" in the serial number. The barrel is factory blued, but does have significant pitting in the exterior finish near the muzzle and speckling around the breech.

We recommend our #BALL-530 Hornady pure lead .530" round ball, #OX-15-50-D Ox Yoke .015" dry patch, #MINK OIL tallow lubricant, and 70 grains of #GOEX-FFg black powder for best accuracy. If hunting big game, in thick brush, try our 54 caliber Maxi-ball. Increase the powder charge as needed, to achieve best accuracy with this heavier bullet. Recoil will increase, but will not be noticed during the hunt.

Our front view shows the straight grain American black walnut stock. The stock has many pressure dents and marks from field use. The blued steel buttplate is wide and nearly flat to spread the recoil from the .54 caliber bore over a large area. The buttplate shows wear in the finish from loading and the factory slotted screws have been replaced with head screws. The wide trigger bow has ample room for the double lever, double set triggers. The black fiberglass ramrod is threaded to accept 10-32 cleaning and loading accessories. A small brass loading jag is currently installed.

Our top view shows the hooked breech that allows the barrel to be dismounted for cleaning. To dismount the barrel, place the lock at half cock, withdraw the ramrod, remove the single wedge key located forward and below the barrel. Use a small brass drift, such as our #TOOL-KEY-B. Once the key is removed, lift the barrel from the muzzle to unhook the breech from the tang. Remove the nipple and place the breech end of the barrel in a bucket of soapy water. Run a wet patch down and up the bore, the pumping action will flush all the fouling from the barrel. Once the bore is clean, run a dry patch down the bore to pick up any moisture followed by a oily patch. Dry and oil the exterior then reassemble the rifle.

Our lock view shows the color case hardened percussion lock, factory engraved by Thompson Center. This lock works smoothly, with a strong mainspring, and fly detent to allow the use of double set triggers. The color case hardened finish is mostly worn off the front of the lock plate. The hammer nose also has pitting from not being cleaned properly.

Correctly adjusted, you may cock the lock, or set the trigger, in any sequence. Turn the tiny set trigger adjustment screw, between the two triggers, inboard to reduce the set trigger release tension. Or turn it fully inboard, to disable the set trigger feature, when hunting in very cold climates, where a numb finger might release the light set trigger too early. When training youngsters, we prefer to start with the set trigger disabled.

This Thompson Center Renegade was assembled from a kit. The bore is mostly bright with some light pitting. It will serve you well on your next big game hunt. Our customers like these well made American guns, for their reliable service, durable reputation, accuracy, and good value. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

bullets, .54 caliber, T/C Maxi-Ball, hand cast pure lead, 425 grains, per 20
bullets, .54 caliber, T/C Maxi-Ball, hand cast pure lead, 425 grains, per 20
Part Number: BALL-54-MAXI
Availability: In Stock
Price: $9.99
Order Quantity:
.530" round balls, pure lead, Hornady, per 100
.530" round balls, pure lead, Hornady, per 100
Part Number: BALL-530
Availability: In Stock
Price: $15.29
Order Quantity:
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $3.99
Order Quantity:
Ball puller, steel screw, .54 caliber brass collar, 10-32 thread
Ball puller, steel screw, .54 caliber brass collar, 10-32 thread
Part Number: BP-54-10
Availability: In Stock
Price: $3.75
Order Quantity:
Bore brush, bronze, for .54 caliber, 10-32 thread
Bore brush, bronze, for .54 caliber, 10-32 thread
Part Number: BRUSH-54-10
Availability: In Stock
Price: $2.99
Order Quantity:
Brass Capper, for #11 caps, straight line, made in the USA, by Tedd Cash
Brass Capper, for #11 caps, straight line, made in the USA, by Tedd Cash
Part Number: CAPPER-P
Availability: In Stock
Price: $10.99
Order Quantity:
Nipple, Hot Shot® for Thompson Center Hawken & other popular guns, 1/4-28 thread, #11 CCI cap, stainless steel

Cone length: 0.440" Thread journal length: 0.195" Overall length: 0.635" Diameter of base: 0.307"
Nipple, Hot Shot® for Thompson Center Hawken & other popular guns, 1/4-28 thread, #11 CCI cap, stainless steel
  • Cone length: 0.440"
  • Thread journal length: 0.195"
  • Overall length: 0.635"
  • Diameter of base: 0.307"
Part Number: HOT-SHOT-RST
Availability: In Stock
Price: $6.99
Order Quantity:
Jag, jagged cleaning tip, brass, .54 caliber, 3/8" rod, 10-32 thread
Jag, jagged cleaning tip, brass, .54 caliber, 3/8" rod, 10-32 thread
Part Number: JS-54-6-10
Availability: In Stock
Price: $4.25
Order Quantity:
Powder measure, brass, adjustable 0 to 120 grains, with spout
Powder measure, brass, adjustable 0 to 120 grains, with spout
Part Number: MAS-120
Availability: In Stock
Price: $14.99
Order Quantity:
Trapper's MINK OIL TALLOW,
patch grease,
for match shooting & cold weather hunting,
one 8 oz. tin
Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin
Part Number: MINK-OIL
Availability: In Stock
Price: $6.99
Order Quantity:
Shooting patches, .015" cotton, .50 - .59 caliber, per 100, dry
Shooting patches, .015" cotton, .50 - .59 caliber, per 100, dry
Part Number: OX-15-50-D
Availability: In Stock
Price: $3.29
Order Quantity:
Shooting patches, .015" cotton, .50 - .59 caliber, per 100, wonder-lube
Shooting patches, .015" cotton, .50 - .59 caliber, per 100, wonder-lube
Part Number: OX-15-50-W
Availability: In Stock
Price: $6.19
Order Quantity:
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Part Number: OX-CLEAN-58C
Availability: In Stock
Price: $3.89
Order Quantity:
Ramrod, 3/8" hickory, 48" long, brass tip, 10-32 thread
Ramrod, 3/8" hickory, 48" long, brass tip, 10-32 thread
Part Number: RAMROD-6-10-B
Availability: In Stock
Price: $15.99
Order Quantity:
Ramrod for Thompson Center Renegade, Renegade Hunter, or Big Boar Rifle,
3/8" brown Delrin nylon, 26-5/8" long. Brass tips are threaded 10-32 at rear, 8-32 at front.

Made by Track of the Wolf, in our Elk River, Minnesota, we make the brass tips and assemble the ramrod.
Ramrod for Thompson Center Renegade, Renegade Hunter, or Big Boar Rifle, 3/8" brown Delrin nylon, 26-5/8" long. Brass tips are threaded 10-32 at rear, 8-32 at front. Made by Track of the Wolf, in our Elk River, Minnesota, we make the brass tips and assemble the ramrod.
Part Number: RAMROD-265-TC
Availability: Item is currently sold out.
Price: $17.99
Order Quantity:
  
Short Starter, patch & ball starter, 1/2" wooden rod for .54 and larger calibers.
Short Starter, patch & ball starter, 1/2" wooden rod for .54 and larger calibers.
Part Number: ST-8
Availability: In Stock
Price: $6.99
Order Quantity:
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
Part Number: WORM-CORK-10
Availability: In Stock
Price: $6.59
Order Quantity:
Track's Catalog 18,
Out of Print
Please use our FREE on-line catalog and web site.
Track's Catalog 18, Out of Print Please use our FREE on-line catalog and web site.
Part Number: CATALOG-18
Availability: Book is no longer being printed or produced. Once we sell through our remaining inventory, item will no longer be available.  We will not be getting any more in.
Price: $10.00
  
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2019Track of the Wolf, Inc.
Accepted Credit Cards