T/C Hawken Rifle,
.45 caliber, 32" Green Mountain barrel,
percussion lock, iron furniture, fancy walnut stock,
used by Thompson Center Arms
Part Number: AAR-890
Availability: Item has been shipped out for inspection, and at this time, is NOT available. You can click "Notify Me" and enter your email address.  We will notify you IF this item becomes available again.
  
This .45 caliber Thompson Center Hawken percussion rifle is ready to shoot. This rifle is stocked in a very fancy piece of American black walnut, with iron furniture, and a browned 32" Green Mountain barrel. The bore is bright and has been well maintained. The stock and furniture have scattered handling marks from use. Weight is 9.3 pounds, and with a trigger reach of 13-7/8 inches, the rifle is perfectly setup for today's average man size shooter.

The Green Mountain barrel is .45 caliber, 15/16" octagon, 32" length. The bore is cut rifled with a 1 in 60" rate of twist to shoot a patched round ball. We recommend our .440" round ball, .015" patch, and Mink Oil tallow patch lubricant, over a charge of 70 grains of GOEX FFg black powder. The factory blue finish has been removed and the factory marking on the upper flats have been draw filed smooth and the barrel has been browned to a matte tone. A brass blade front sight is fitted and a semi-buckhorn rear sight has been dovetailed 6-1/2" ahead of the breech. One of the original adjustable rear sight mounting screw holes is visible just behind the rear sight and has been filled with a screw and filed flush with the top flat.

The rifle is stocked in very fancy piece of black walnut and the factory brass furniture has been replaced with iron trim with the exception of the capbox. The wood has small handling marks associated with normal use and disassembly for cleaning. The heel of the buttplate shows some wear from being placed on the ground during loading and cleaning. The hooked breech allows the barrel to be easily dismounted for cleaning without risk of wetting the stock with water containing black powder residue. To dismount the barrel, put the lock on half cock, withdraw the ramrod, drift the key past the underlug, and the barrel can be lifted from the barrel channel for ease of cleaning. Remove the nipple and place the breech end of the barrel in a bucket of soapy water. Run a wet patch down and up the bore, the pumping action will flush all the fouling from the barrel. Once the bore is clean, run a dry patch down the bore to pick up any moisture followed by a oily patch. Dry and oil the exterior then reassemble the rifle. The 3/8" wooden ramrod is fitted with a brass tip to accept 8-32 cleaning and loading accessories.

The color case hardened percussion lock has started to age to a dark brown patina and has a few vertical scuff marks across the front of the lock plate . The breech is fitted with a 1/4-28 stainless steel nipple. Double lever double set triggers are well adjusted, to fire set or unset. When the rear trigger is set (latched), the front trigger has a hair-trigger release, perhaps 2 or 3 ounces. The adjustment screw between the triggers allows even finer or coarser adjustment, as desired. Or, turn the screw fully inboard, to disable the set trigger feature, when hunting in very cold weather.

Attractively priced, this Thompson Center Hawken Rifle is in excellent condition with a bright clean bore. Fitted with browned iron furniture and primitive sights for a plans rifle appearance. This American made rifle is a good value. We invite trades, and we buy T/C guns. If you have a used Thompson Center Seneca, Hawken, Cherokee, Renegade, Patriot Pistol, New Englander, or other muzzle loading side hammer rifle, please consider our service when you are ready to sell. Our customers like these well made American guns, for their reliable service, durable reputation, accuracy, and good value.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

.440" round balls, pure lead, Hornady, per 100
.440" round balls, pure lead, Hornady, per 100
Part Number: BALL-440
Availability: In Stock
Price: $10.19
Order Quantity:
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $3.99
Order Quantity:
Ball puller, steel screw, .45 caliber brass collar, 8-32 thread
Ball puller, steel screw, .45 caliber brass collar, 8-32 thread
Part Number: BP-45-8
Availability: In Stock
Price: $3.50
Order Quantity:
Brass Capper, for #11 caps, straight line, made in the USA, by Tedd Cash
Brass Capper, for #11 caps, straight line, made in the USA, by Tedd Cash
Part Number: CAPPER-P
Availability: In Stock
Price: $11.29
Order Quantity:
Flush Nipple,
1/4-28 thread,
stainless steel, with 1/4" square shank for nipple wrench,
with tubing, fits Thompson Center
Flush Nipple, 1/4-28 thread, stainless steel, with 1/4" square shank for nipple wrench, with tubing, fits Thompson Center
Part Number: FLUSH-RST
Availability: In Stock
Price: $4.29
Order Quantity:
Fouling Scraper, flat face, brass, .45 caliber, 8-32 thread
Fouling Scraper, flat face, brass, .45 caliber, 8-32 thread
Part Number: FS-45-8
Availability: In Stock
Price: $3.79
Order Quantity:
Jag, jagged cleaning tip, brass, .45 caliber, 3/8 rod, 8-32 thread
Jag, jagged cleaning tip, brass, .45 caliber, 3/8 rod, 8-32 thread
Part Number: JS-45-6-8
Availability: In Stock
Price: $4.25
Order Quantity:
Powder measure, brass, adjustable 0 to 120 grains, with spout
Powder measure, brass, adjustable 0 to 120 grains, with spout
Part Number: MAS-120
Availability: In Stock
Price: $14.99
Order Quantity:
Trapper's MINK OIL TALLOW,
patch grease,
for match shooting & cold weather hunting,
one 8 oz. tin
Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin
Part Number: MINK-OIL
Availability: In Stock
Price: $6.99
Order Quantity:
Shooting patches, .010" cotton, .40 - .49 caliber, per 100, dry
Shooting patches, .010" cotton, .40 - .49 caliber, per 100, dry
Part Number: OX-10-40-D
Availability: In Stock
Price: $3.19
Order Quantity:
Shooting patches, .015" cotton, .40 - .49 caliber, per 100, dry
Shooting patches, .015" cotton, .40 - .49 caliber, per 100, dry
Part Number: OX-15-40-D
Availability: In Stock
Price: $3.19
Order Quantity:
Cleaning Patches, 2" diameter, bag of 100, pure cotton flannel, for .30 to .40 caliber
Cleaning Patches, 2" diameter, bag of 100, pure cotton flannel, for .30 to .40 caliber
Part Number: OX-CLEAN-45C
Availability: In Stock
Price: $2.99
Order Quantity:
Ramrod, 3/8" hickory, 48" long, brass tip, 8-32 thread
Ramrod, 3/8" hickory, 48" long, brass tip, 8-32 thread
Part Number: RAMROD-6-8-B
Availability: Item is currently sold out.
Price: $15.99
Order Quantity:
  
Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, stainless steel
Cone length 0.440"Overall length: 0.635" Thread journal length: 0.195" Diameter of base: 0.307"
Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, stainless steel
  • Cone length 0.440"
  • Overall length: 0.635"
  • Thread journal length: 0.195"
  • Diameter of base: 0.307"
Part Number: RST-S
Availability: In Stock
Price: $4.99
Order Quantity:
Short Starter, patch & ball starter, with 3/8" hickory rod for .40 to .45 caliber.
Short Starter, patch & ball starter, with 3/8" hickory rod for .40 to .45 caliber.
Part Number: ST-6
Availability: In Stock
Price: $6.99
Order Quantity:
Patch puller, corkscrew worm, steel, brass base, 8-32 thread
Patch puller, corkscrew worm, steel, brass base, 8-32 thread
Part Number: WORM-CORK-8
Availability: In Stock
Price: $6.59
Order Quantity:
Track's Catalog 18,
Out of Print
Please use our FREE on-line catalog and web site.
Track's Catalog 18, Out of Print Please use our FREE on-line catalog and web site.
Part Number: CATALOG-18
Availability: Book is no longer being printed or produced. Once we sell through our remaining inventory, item will no longer be available.  We will not be getting any more in.
Price: $10.00
  
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2019Track of the Wolf, Inc.
Accepted Credit Cards