Thompson Center New Englander Rifle,
.50 caliber, 26" barrel,
percussion, walnut, iron trim,
used appears as-new
Part Number: AAR-723
Availability: In Stock
Price: $499.00
Order Quantity:
This used Thompson Center New Englander .50 caliber percussion rifle is factory finished and appears to be in near new condition. The American black walnut stock has a few small handling marks. The barrel bluing and color case hardened finish on the lock are both in excellent condition with no wear typical of firing and cleaning. Stocked in American black walnut, this rifle has a 13-1/2" trigger pull. Weight is 7.6 pounds.

This .50 caliber Thompson Center New Englander Rifle has a 26" tapered round barrel to reduce muzzle weight. The bore is rifled with a 1 in 48" twist for a patched round ball, or T/C Maxi ball. The bore is bright with one small area of speckling. We recommend our .490" round ball, .015" patch, and Mink Oil tallow patch lubricant, over a charge of 70 grains of GOEX FFg black powder. Or the modest twist can be used with a conical Thompson Center Maxi-ball. The factory rear sight is adjustable, with windage and elevation screws. A bead sight is fitted behind the muzzle.

The American black walnut stock, factory finished. The stock has a few minor handling marks, but otherwise appears as new. The buttplate is blued steel, to match the triggerguard. The triggerguard has a wide bow to allow easy access to the single trigger with a gloved hand. The single lock bolt has a blued steel washer style side plate. The factory ramrod has blued steel tips with 10-32 threads. Our lock view shows the color case hardened percussion lock, factory engraved by Thompson Center. This lock works smoothly, with a strong mainspring. The breech is fitted with a 1/4-28 threaded nipple.

The hooked breech allows the barrel to be easily dismounted for cleaning without risk of wetting the stock with water containing black powder residue. To dismount the barrel, put the lock on half cock, withdraw the ramrod, drift the keys past the underlugs, and the barrel can be lifted from the barrel channel for ease of cleaning. Remove the nipple and place the breech end of the barrel in a bucket of soapy water. Run a wet patch down and up the bore, the pumping action will flush all the fouling from the barrel. Once the bore is clean, run a dry patch down the bore to pick up any moisture followed by a oily patch. Dry and oil the exterior then reassemble the rifle.

A near new example of this no longer in production Thompson Center rifle. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

bullets, .50 caliber, Hornady Great Plains, 385 grain, pure lead, hollow base, hollow point, per 20
bullets, .50 caliber, Hornady Great Plains, 385 grain, pure lead, hollow base, hollow point, per 20
Part Number: BALL-50-385
Availability: In Stock
Price: $9.99
Order Quantity:
bullets, .50 caliber, T/C Maxi-Ball, hand cast pure lead, about 378 grains, per 20
bullets, .50 caliber, T/C Maxi-Ball, hand cast pure lead, about 378 grains, per 20
Part Number: BALL-50-MAXI
Availability: In Stock
Price: $9.99
Order Quantity:
.490" round balls, pure lead, Hornady, per 100
.490" round balls, pure lead, Hornady, per 100
Part Number: BALL-490
Availability: In Stock
Price: $12.59
Order Quantity:
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $3.99
Order Quantity:
Ball puller, steel screw, .50 caliber brass collar, 10-32 thread
Ball puller, steel screw, .50 caliber brass collar, 10-32 thread
Part Number: BP-50-10
Availability: In Stock
Price: $3.75
Order Quantity:
Bore brush, bronze, for .50 caliber, 10-32 thread
Bore brush, bronze, for .50 caliber, 10-32 thread
Part Number: BRUSH-50-10
Availability: In Stock
Price: $2.99
Order Quantity:
Brass Capper, for #11 caps, straight line, made in the USA, by Tedd Cash
Brass Capper, for #11 caps, straight line, made in the USA, by Tedd Cash
Part Number: CAPPER-P
Availability: In Stock
Price: $11.29
Order Quantity:
Flush Nipple,
1/4-28 thread,
stainless steel, with 1/4" square shank for nipple wrench,
with tubing, fits Thompson Center
Flush Nipple, 1/4-28 thread, stainless steel, with 1/4" square shank for nipple wrench, with tubing, fits Thompson Center
Part Number: FLUSH-RST
Availability: In Stock
Price: $4.29
Order Quantity:
Nipple, Hot Shot® for Thompson Center Hawken & other popular guns, 1/4-28 thread, #11 CCI cap, stainless steel

Cone length: 0.440" Thread journal length: 0.195" Overall length: 0.635" Diameter of base: 0.307"
Nipple, Hot Shot® for Thompson Center Hawken & other popular guns, 1/4-28 thread, #11 CCI cap, stainless steel
  • Cone length: 0.440"
  • Thread journal length: 0.195"
  • Overall length: 0.635"
  • Diameter of base: 0.307"
Part Number: HOT-SHOT-RST
Availability: In Stock
Price: $6.99
Order Quantity:
Jag, jagged cleaning tip, brass, .50 caliber, 3/8 rod, 10-32 thread
Jag, jagged cleaning tip, brass, .50 caliber, 3/8 rod, 10-32 thread
Part Number: JS-50-6-10
Availability: In Stock
Price: $4.25
Order Quantity:
Powder measure, brass, adjustable 0 to 120 grains, with spout
Powder measure, brass, adjustable 0 to 120 grains, with spout
Part Number: MAS-120
Availability: In Stock
Price: $14.99
Order Quantity:
Trapper's MINK OIL TALLOW,
patch grease,
for match shooting & cold weather hunting,
one 8 oz. tin
Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin
Part Number: MINK-OIL
Availability: In Stock
Price: $6.99
Order Quantity:
Shooting patches, .015" cotton, .50 - .59 caliber, per 100, dry
Shooting patches, .015" cotton, .50 - .59 caliber, per 100, dry
Part Number: OX-15-50-D
Availability: In Stock
Price: $3.29
Order Quantity:
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Part Number: OX-CLEAN-58C
Availability: In Stock
Price: $3.89
Order Quantity:
Ramrod, 3/8" hickory, 48" long, brass tip, 10-32 thread
Ramrod, 3/8" hickory, 48" long, brass tip, 10-32 thread
Part Number: RAMROD-6-10-B
Availability: In Stock
Price: $15.99
Order Quantity:
Ramrod for New Englander Rifle, 
3/8" dark brown Delrin nylon, 27" long. Brass tip is threaded 10-32 at rear, with tempered steel ball puller hidden under the .50 caliber cleaning jag at front.

Made in the USA, by Track of the Wolf, Elk River, Minnesota.
Ramrod for New Englander Rifle, 3/8" dark brown Delrin nylon, 27" long. Brass tip is threaded 10-32 at rear, with tempered steel ball puller hidden under the .50 caliber cleaning jag at front. Made in the USA, by Track of the Wolf, Elk River, Minnesota.
Part Number: RAMROD-270-50
Availability: In Stock
Price: $19.99
Order Quantity:
Ramrod for New Englander Rifle, 
3/8" ebony black Delrin nylon, 27" long. Brass tips are threaded 10-32 at rear, 8-32 at front. 
Made by Track of the Wolf, Elk River, Minnesota. We turn the brass tips and assemble the ramrod.
Ramrod for New Englander Rifle, 3/8" ebony black Delrin nylon, 27" long. Brass tips are threaded 10-32 at rear, 8-32 at front. Made by Track of the Wolf, Elk River, Minnesota. We turn the brass tips and assemble the ramrod.
Part Number: RAMROD-270-TC
Availability: In Stock
Price: $17.99
Order Quantity:
Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, stainless steel
Cone length 0.440"Overall length: 0.635" Thread journal length: 0.195" Diameter of base: 0.307"
Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, stainless steel
  • Cone length 0.440"
  • Overall length: 0.635"
  • Thread journal length: 0.195"
  • Diameter of base: 0.307"
Part Number: RST-S
Availability: In Stock
Price: $4.99
Order Quantity:
Short Starter, patch & ball starter, 7/16" hickory rod for .50 caliber.
Short Starter, patch & ball starter, 7/16" hickory rod for .50 caliber.
Part Number: ST-7
Availability: In Stock
Price: $6.99
Order Quantity:
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
Part Number: WORM-CORK-10
Availability: In Stock
Price: $6.59
Order Quantity:
Track's Catalog 18,
Out of Print
Please use our FREE on-line catalog and web site.
Track's Catalog 18, Out of Print Please use our FREE on-line catalog and web site.
Part Number: CATALOG-18
Availability: Book is no longer being printed or produced. Once we sell through our remaining inventory, item will no longer be available.  We will not be getting any more in.
Price: $10.00
  
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2019Track of the Wolf, Inc.
Accepted Credit Cards