Hawken Fullstock Rifle
.54 caliber, 36" Rice barrel,
percussion lock, curly maple fullstock, brass trim,
near new, by G. Guinart
Part Number: AAR-338
Availability: In Stock
Price: $2,199.00
Order Quantity:
This fullstock St. Louis Plains rifle is stocked in figured maple and trimmed in brass furniture. The straight octagon barrel is fitted with a hooked breech and secured to the stock with three wedge keys. The snail breech is mated to a Ron Long percussion Hawken lock. Neatly assembled and finished by contemporary builder G. Guinart. Weighing in at 10.0 pounds this fullstock rifle has a trigger reach of 13-1/2" making the gun well suited for today's average size shooter.

The .54 caliber Rice barrel is cut rifled with seven lands and square grooves. Twist is 1 turn in 66 inches, for .530 diameter round ball. Rice Muzzle Loading Rifle Barrels are set between centers and milled octagonal, insuring a centered bore, concentric with the exterior, with no "run-out". Each barrel is stress relieved in an atmosphere controlled electric furnace, to eliminate work hardening or barrel warp, and to dampen harmonic vibrations or barrel whip.

After the rifling has been cut, each bore is "ball burnished". A carbide bore-sizing die is pulled through the barrel, to insure bore dimension uniformity, eliminating any tight or loose spots inside the barrel. This critical procedure leaves the top of the lands smooth and polished, equaling the traditional lead lapping procedure. Rice barrels are Match grade quality, with bench rest capability. Rice barrels do not require lapping or extensive shooting to break-in.

We recommend our, #BALL-530, .530" round balls, #OX-18-50-D, .018" Ox-Yoke ticking patches, and pure #MINK-OIL patch grease for accurate shooting. The barrel is fitted with a iron blade front sight. The rear sight is a Mariano Modena style rear sight dovetailed 11" ahead of the breech. Shooters with "older" eyes or corrective lenses will generally find this extra distance easier to focus on.

This Hawken fullstock is trimmed entirely in brass furniture. A crescent style buttplate is neatly fitted and secured with two steel screws. The curly maple stock has attractive tiger stripe figure, with randomly spaced stripes running the full length of the stock. The stock appears to be in as-new condition. The barrel is fitted with a hooked breech. It was noted that it has been bedded into the stock, no bedding is visible from the exterior of the rifle. The long tang supports the two tang bolts that anchor the tang to the long trigger plate below, reinforcing the wrist, a classic feature of rugged Hawken rifles. The tang is very well fitted with tight inletting and the tang bolt heads have been polished and indexed to have the slots aligned with the barrel.

Our bottom view shows the classic beaver tail Hawken toeplate. The R.E. Davis double set triggers are made with a very long trigger bar. Two bolts enter from the long steel tang, re-enforcing the wrist from above and below. This was a desirable feature for a Mountain Man, when trapping in Colorado.The 7/16" diameter hickory ramrod with a steel core was custom made by the builder for this rifle. The ramrod is held in place by classic Hawken brass ramrod pipes. The ramrod is fitted with a brass tip threaded 10-32 for loading and cleaning accessories. The single lock bolt is surrounded by a traditional tear drop sideplate escutcheon. The buttstock is shaped with a large oval cheek piece. Metal to wood fit is excellent with tightly fitted parts.

Ron Long, of Denver, designed this T. Gibbons Hawken percussion lock. Skillfully assembled and tuned, this is the correct Hawken lock for a late fur trade era percussion rifle. Polished inside, the well tempered parts include a strong mainspring, stirrup link, and a fly detent to allow set triggers.

R.E. Davis double lever double set triggers fire set or unset, for target match shooting, or cold weather hunting with gloved fingers. Turn the set screw, between the two triggers, inboard, until the rear trigger is disabled. After hunting, return the screw to its normal position, and adjust it to make your set trigger as strong or as feather light as you prefer, within the limits of safe use.

This neatly shaped and well fitted Plains rifle is in excellent condition with a bright bore and stock that appears to be as-new. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

.530" round balls, pure lead, Hornady, per 100
.530" round balls, pure lead, Hornady, per 100
Part Number: BALL-530
Availability: In Stock
Price: $15.29
Order Quantity:
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $3.99
Order Quantity:
Ball puller, steel screw, .54 caliber brass collar, 10-32 thread
Ball puller, steel screw, .54 caliber brass collar, 10-32 thread
Part Number: BP-54-10
Availability: In Stock
Price: $3.75
Order Quantity:
Bore brush, bronze, for .54 caliber, 10-32 thread
Bore brush, bronze, for .54 caliber, 10-32 thread
Part Number: BRUSH-54-10
Availability: In Stock
Price: $2.99
Order Quantity:
Track's Catalog 18,
432 pages, full color,
filled with Exact Full Size Photos
of most gun parts.
Track's Catalog 18, 432 pages, full color, filled with Exact Full Size Photos of most gun parts.
Part Number: CATALOG-18
Availability: In Stock
Price: $10.00
Order Quantity:
Powder Flask,
brass body, brass dispensing valve,
embossed Diamond or Basket Weave pattern
accepts 10-1mm threaded spouts
Powder Flask, brass body, brass dispensing valve, embossed Diamond or Basket Weave pattern accepts 10-1mm threaded spouts
Part Number: FLASK-DIAMOND
Availability: In Stock
Price: $43.99
Order Quantity:
Fouling Scraper, flat face, brass, .54 caliber, 10-32 thread
Fouling Scraper, flat face, brass, .54 caliber, 10-32 thread
Part Number: FS-54-10
Availability: In Stock
Price: $3.79
Order Quantity:
Jag, jagged cleaning tip, brass, .54 caliber, 7/16" rod, 10-32 thread
Jag, jagged cleaning tip, brass, .54 caliber, 7/16" rod, 10-32 thread
Part Number: JS-54-7-10
Availability: In Stock
Price: $4.25
Order Quantity:
Powder measure, brass, adjustable 0 to 120 grains, with spout
Powder measure, brass, adjustable 0 to 120 grains, with spout
Part Number: MAS-120
Availability: In Stock
Price: $14.99
Order Quantity:
Trapper's MINK OIL TALLOW,
patch grease,
for match shooting & cold weather hunting,
one 8 oz. tin
Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin
Part Number: MINK-OIL
Availability: In Stock
Price: $6.99
Order Quantity:
Shooting patches, .015" cotton, .50 - .59 caliber, per 100, dry
Shooting patches, .015" cotton, .50 - .59 caliber, per 100, dry
Part Number: OX-15-50-D
Availability: In Stock
Price: $3.29
Order Quantity:
Shooting patches, .018" pillow ticking, .50 - .59 caliber, per 100, dry
Shooting patches, .018" pillow ticking, .50 - .59 caliber, per 100, dry
Part Number: OX-18-50-D
Availability: In Stock
Price: $3.59
Order Quantity:
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Part Number: OX-CLEAN-58C
Availability: In Stock
Price: $3.89
Order Quantity:
Ramrod, 3/8" hickory, 48" long, brass tip, 10-32 thread
Ramrod, 3/8" hickory, 48" long, brass tip, 10-32 thread
Part Number: RAMROD-6-10-B
Availability: In Stock
Price: $15.99
Order Quantity:
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
Part Number: WORM-CORK-10
Availability: In Stock
Price: $6.59
Order Quantity:
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2018Track of the Wolf, Inc.
Accepted Credit Cards