Underhammer Rifle
.50 caliber, 32" octagon-to-round barrel,
walnut, iron furniture, pewter forend cap,
Lyman peep and globe sight, used
Part Number: AAQ-229
Availability: In Stock
Price: $859.00
Order Quantity:
Produced in the style of those underhammer rifles popular in New York and New England, this lovely piece has been neatly fitted and finished. Stocked in black walnut the stock is trimmed in iron furniture with a poured pewter forend cap. The rifle assembled around an octagon-to-round barrel and fitted with Lyman 57 peep sight and 17 glove sight. The rear sight is missing the apertures, the front sight has a single aperture.

The octagon-to-round barrel has a 13" breech section with a sixteen flat transition to round. The .50 caliber bore is rifled with six lands and grooves with a fast twist for a conical bullet. The bore is bright and has been well maintained. The barrel, underrib, and ramrod pipes are finished to a smooth dark brown.

The black walnut stock is stained to a dark brown with golden undertones. The stock has scattered handling marks with the two largest on the forearm below the rear wedge key. A wide, flat shotgun style checkered steel buttplate has been installed to help spread the recoil of this .50 caliber rifle.

Weighing in at 10.3 pounds the rifle has a trigger reach of 14" making it well suited for today's average size shooters.

The shotgun buttplate has a tapered point that just wraps over the heel. The barrel is assembled with a hooked breech and tang which appear to have been joined together. The barrel breech and tang are all finished to a dark brown. The long tang of the breech makes a perfect platform to mount the Lyman 57 peep sight. The sight is missing the apertures. Replacement apertures are available separately our #RS-57-DISK-2L and #RS-57-DISK-2S. The front sight is a Lyman 17 globe sight. It has only a single aperture. A full set of apertures is available separately #FS-17-INSERT.

The stock is shaped with a rounded toe . The plains rifle style iron triggerguard is fitted to the bottom of the action. The hammer extends from the front of the action and strikes the nipple installed on the bottom of the barrel. The nipple and hammer are both neatly recessed into the breech end of the stock.

The rifle has a small brass ramrod stop positioned just ahead of the hammer. The rifle is fitted with a study 3/8" diameter synthetic ramrod fitted with a brass tip with 10-32 threads for loading and cleaning accessories. The ramrod has been left long and does extend past the muzzle.

Our final look at the rifle again shows off the black walnut stock with raised oval cheek piece. Neatly fit and finished this unique rifle will make an excellent addition to any black powder shooters collection, be it for display or for shooting. The wide, flat buttplate will help absorb the felt recoil of the .50 caliber bore.

Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

Call us, at 763-633-2500 during business hours, to discuss this nice piece in greater detail, or to place your order by telephone. Have your part numbers and credit card ready. We accept Visa, MasterCard, American Express, or Discover cards. First come - first served, so you may be wise to order now, using our secure On-Line Shopping Cart.

bullets, .50 caliber, Hornady Great Plains, 385 grain, pure lead, hollow base, hollow point, per 20
bullets, .50 caliber, Hornady Great Plains, 385 grain, pure lead, hollow base, hollow point, per 20
Part Number: BALL-50-385
Availability: In Stock
Price: $9.99
Order Quantity:
bullets, .50 caliber, T/C Maxi-Ball, hand cast pure lead, about 378 grains, per 20
bullets, .50 caliber, T/C Maxi-Ball, hand cast pure lead, about 378 grains, per 20
Part Number: BALL-50-MAXI
Availability: In Stock
Price: $8.99
Order Quantity:
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $3.99
Order Quantity:
Ball puller, steel screw, .50 caliber brass collar, 10-32 thread
Ball puller, steel screw, .50 caliber brass collar, 10-32 thread
Part Number: BP-50-10
Availability: In Stock
Price: $3.19
Order Quantity:
Bore brush, bronze, for .50 caliber, 10-32 thread
Bore brush, bronze, for .50 caliber, 10-32 thread
Part Number: BRUSH-50-10
Availability: In Stock
Price: $2.99
Order Quantity:
Brass Capper, for #11 caps, straight line, made in the USA, by Tedd Cash
Brass Capper, for #11 caps, straight line, made in the USA, by Tedd Cash
Part Number: CAPPER-P
Availability: In Stock
Price: $11.29
Order Quantity:
Track's Catalog 18,
432 pages, full color,
filled with Exact Full Size Photos
of most gun parts.
Track's Catalog 18, 432 pages, full color, filled with Exact Full Size Photos of most gun parts.
Part Number: CATALOG-18
Availability: In Stock
Price: $10.00
Order Quantity:
Fouling Scraper, flat face, brass, .50 caliber, 10-32 thread
Fouling Scraper, flat face, brass, .50 caliber, 10-32 thread
Part Number: FS-50-10
Availability: In Stock
Price: $3.49
Order Quantity:
Jag, jagged cleaning tip, brass, .50 caliber, 3/8 rod, 10-32 thread
Jag, jagged cleaning tip, brass, .50 caliber, 3/8 rod, 10-32 thread
Part Number: JS-50-6-10
Availability: In Stock
Price: $3.99
Order Quantity:
Powder measure, brass, adjustable 0 to 120 grains, with spout
Powder measure, brass, adjustable 0 to 120 grains, with spout
Part Number: MAS-120
Availability: In Stock
Price: $14.99
Order Quantity:
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Part Number: OX-CLEAN-58C
Availability: In Stock
Price: $3.89
Order Quantity:
Ramrod, 3/8" hickory, 48" long, brass tip, 10-32 thread
Ramrod, 3/8" hickory, 48" long, brass tip, 10-32 thread
Part Number: RAMROD-6-10-B
Availability: In Stock
Price: $15.99
Order Quantity:
Short Starter, patch & ball starter, 7/16" hickory rod for .50 caliber.
Short Starter, patch & ball starter, 7/16" hickory rod for .50 caliber.
Part Number: ST-7
Availability: In Stock
Price: $7.99
Order Quantity:
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
Part Number: WORM-CORK-10
Availability: In Stock
Price: $5.99
Order Quantity:
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773
Tel: 763-633-2500 Fax: 763-633-2550

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2017Track of the Wolf, Inc.
Accepted Credit Cards