English Fowler,
20 gauge, 44" octagon-to-round barrel,
curly maple, brass trim, R.E. Davis Twigg lock,
new, unfired, by T. Frazier
Part Number: AAT-394
Availability: Item has been shipped out for inspection, and at this time, is NOT available. You can click "Notify Me" and enter your email address.  We will notify you IF this item becomes available again.
  
This flint lock fowler features 1760 to 1770 era styling with brass trim, curly maple stock, and John Twigg style flintlock. This fowler has similar architecture to some of the examples shown in the book #BOOK-FF-S Flintlock Fowlers, The First Guns Made in America by Tom Grinslade, but is not a specific copy of one of the examples. The fowler is assembled around a 20 gauge octagon-to-round Colerain barrel. The fowler is as-new unfired and is signed by contemporary builder Thom Frazier on the breech end of the barrel. The trigger reach is 13-3/8" to fit today's larger or taller shooter. Weight is 7.8 pounds

The 20 gauge by 44" octagon-to-round barrel transitions from 8 flats to round with a single wedding band. We recommend our 20 gauge wads and cards for use with the .615" diameter bore. The bore appears bright in as-new condition. The exterior of the barrel is finished to a dark pewter gray. The barrel is fitted with a silver blade front sight soldered behind the muzzle, and does have a low rear sight dovetailed 12" ahead of the breech.

The maple stock is stained to a warm brown to best display the figure in the stock. Note the long baluster wrist, this is a classic early feature of fowling guns and trade guns from Europe and was often replicated on homegrown fowling pieces. The buttplate is a English design, with a long stepped comb. The lock panels taper widest at the rear in early long gun fashion. The lock panels are accented with raised beaver tail finials that transition into raised and incised carving around the flared thumbnail tang of the breech. The brass triggerguard is shaped with a torch finial. A raised carved panel surrounds the triggerguard and is shaped with a decorative finial at the rear of the grip rail. A similar raised and incised carved molding surrounds the pointed skirt of the ramrod entry pipe. The ramrod pipes are shaped from sheet brass with raised rings at the ends to provide strength. The 3/8" diameter ramrod is fitted with a jagged tip with 8-32 threads to accept loading and cleaning accessories. The side panel is fitted with a classic English style sideplate.

The big flint lock is a correct replica of the work of John Twigg - London, made in the USA, by R. E. Davis. Polished and finished to a pewter gray to compliment the finish on the barrel and contrast the stain on the stock. The frizzen has rubbed a small bright line on the barrel flat, where it just touches the barrel. We recommend our 1" English gun flints, #FLINT-ENG-8 for use with this lock. The trigger is pinned high to provide good leverage against the sear. A stainless steel vent liner has been installed on this musket. The vent liner is concave inside to bring the main powder charge very close to the incandescent heat of the priming flash. Well positioned on the center of the pan, slightly above the pan to frizzen joint, sometimes called the "sunset" position. The vent hole is centered on the heat of the priming flash, for instant ignition, without the whoosh-bang delay, seen in many flint guns.

This fowler is as-new unfired. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

.595" round balls, pure lead, hand cast, per 50
.595" round balls, pure lead, hand cast, per 50
Part Number: BALL-595-X
Availability: In Stock
Price: $18.99
Order Quantity:
.600" round balls, pure lead, hand cast, per 25
.600" round balls, pure lead, hand cast, per 25
Part Number: BALL-600-X
Availability: In Stock
Price: $15.49
Order Quantity:
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $4.19
Order Quantity:
Ball puller, steel screw, .62 caliber brass collar, 8-32 thread
Ball puller, steel screw, .62 caliber brass collar, 8-32 thread
Part Number: BP-62-8
Availability: Item is currently sold out.
Price: $4.50
Order Quantity:
  
Bore brush, bronze, for .69 caliber, 5/16-27 thread
Bore brush, bronze, for .69 caliber, 5/16-27 thread
Part Number: BRUSH-69
Availability: Out of Stock, request notification when available.
Price: $3.49
  
English gun flint, 1 x 1-1/8", Tryon, Lott, 1763 Charleville
English gun flint, 1 x 1-1/8", Tryon, Lott, 1763 Charleville
Part Number: FLINT-ENG-8
Availability: In Stock
Price: $2.40
Order Quantity:
Pack of 12 English Gun flints 1 x 1-1/8", NW Trade Gun, Tryon, Lott, 1763 Charleville
Pack of 12 English Gun flints 1 x 1-1/8", NW Trade Gun, Tryon, Lott, 1763 Charleville
Part Number: FLINT-ENG-8-PACK-12
Availability: In Stock
Price: $24.00
Order Quantity:
Button jagged cleaning tip, 20 gauge, brass, 8-32 thread
Button jagged cleaning tip, 20 gauge, brass, 8-32 thread
Part Number: JAG-20-8
Availability: Item is currently sold out.
Price: $3.99
Order Quantity:
  
Jag, jagged cleaning tip, brass, .62 caliber, 7/16" rod, 8-32 thread
Jag, jagged cleaning tip, brass, .62 caliber, 7/16" rod, 8-32 thread
Part Number: JS-62-7-8
Availability: In Stock
Price: $5.49
Order Quantity:
Mold, Lyman .600" round ball mold blocks, single cavity, use large handles
Mold, Lyman .600" round ball mold blocks, single cavity, use large handles
Part Number: LYMAN-600
Availability: Out of Stock, request notification when available.
Price: $87.99
  
Handles for large mold blocks,
by Lyman,
fits all current single and double cavity molds
Handles for large mold blocks, by Lyman, fits all current single and double cavity molds
Part Number: LYMAN-H-L
Availability: In Stock
Price: $47.99
Order Quantity:
Powder measure, brass, adjustable 0 to 120 grains, with spout
Powder measure, brass, adjustable 0 to 120 grains, with spout
Part Number: MAS-120
Availability: In Stock
Price: $18.99
Order Quantity:
Trapper's MINK OIL TALLOW,
patch grease,
for match shooting & cold weather hunting,
one 8 oz. tin
Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin
Part Number: MINK-OIL
Availability: In Stock
Price: $6.99
Order Quantity:
Shooting patches, .015" cotton, .60 - .69 caliber, per 100, dry
Shooting patches, .015" cotton, .60 - .69 caliber, per 100, dry
Part Number: OX-15-60-D
Availability: Out of Stock, request notification when available.
Price: $3.99
  
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Part Number: OX-CLEAN-58C
Availability: In Stock
Price: $4.29
Order Quantity:
Ramrod, 7/16" hickory, 48" long, brass tip, 8-32 thread
Ramrod, 7/16" hickory, 48" long, brass tip, 8-32 thread
Part Number: RAMROD-7-8-B
Availability: In Stock
Price: $17.99
Order Quantity:
Buckshot #4
.240" round balls, lead,
by Hornady, 5 pounds
Buckshot #4 .240" round balls, lead, by Hornady, 5 pounds
Part Number: SHOT-4
Availability: Out of Stock, request notification when available.
Price: $33.99
  
Bird Shot #7,
chilled lead shot,
5 pound box, blend of #7 & #8,
safe for use in antique
black powder shotguns
and fowling guns
Bird Shot #7, chilled lead shot, 5 pound box, blend of #7 & #8, safe for use in antique black powder shotguns and fowling guns
Part Number: SHOT-BIRD-7
Availability: Out of Stock, request notification when available.
Price: $17.59
  
Short Starter, patch & ball starter, 1/2" wooden rod for .54 and larger calibers.
Short Starter, patch & ball starter, 1/2" wooden rod for .54 and larger calibers.
Part Number: ST-8
Availability: In Stock
Price: $7.99
Order Quantity:
20 gauge, .625" ideal for .615" bore, .125" over powder card, 1000, by Circle Fly Wads
20 gauge, .625" ideal for .615" bore, .125" over powder card, 1000, by Circle Fly Wads
Part Number: WAD-20-A
Availability: Out of Stock, request notification when available.
Price: $10.99
  
20 gauge, .625" ideal for .615" bore, .025" over shot card, 1000, by Circle Fly Wads
20 gauge, .625" ideal for .615" bore, .025" over shot card, 1000, by Circle Fly Wads
Part Number: WAD-20-B
Availability: In Stock
Price: $10.99
Order Quantity:
20 gauge, .625" ideal for .615" bore, .500" thick fibre wad, 500, by Circle Fly Wads
20 gauge, .625" ideal for .615" bore, .500" thick fibre wad, 500, by Circle Fly Wads
Part Number: WAD-20-C
Availability: In Stock
Price: $10.99
Order Quantity:
Track's Catalog 18,
Out of Print
Please use our FREE on-line catalog and web site.
Track's Catalog 18, Out of Print Please use our FREE on-line catalog and web site.
Part Number: CATALOG-18
Availability: Book is no longer being printed or produced. Once we sell through our remaining inventory, item will no longer be available.  We will not be getting any more in.
Price: $10.00
  
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2021Track of the Wolf, Inc.
Accepted Credit Cards