English Fowling Gun,
20 gauge, 30" octagon-to-round barrel,
walnut, French gray iron furniture, Twigg flintlock
Part Number: AAS-561
Availability: Item has been shipped out for inspection, and at this time, is NOT available. You can click "Notify Me" and enter your email address.  We will notify you IF this item becomes available again.
  
This late 18th to early 19th century halfstock flint fowling gun is stocked in black walnut and trimmed in French gray finished iron furniture. The fowler is fitted with a R.E. Davis John Twigg flintlock mated to a Paul Paulson 30" octagon-to-round barrel. This fowler is as-new unfired and weights 6.4 pounds with a 13-1/2" trigger reach to fit today's average size shooter.

The fowler barrel by Paul Paulson is 30'' tapered octagon-to-round with a 13" tapered octagon breech with a single wedding band to round. The 20 gauge bore measures .620" diameter. The bore is bright in as-new condition. A brass front sight is fitted behind the muzzle, no rear sight is fitted in typical fowling gun fashion.

The black walnut stock is very straight grain. The long ballister wrist fades into the comb, in early English style. The buttplate is wide and tall to spread the felt recoil over a large area. The buttplate has a long English style comb with a few accents of hand engraving with a flower and decorative border. A short stepped English style hooked breech allows the barrel to be dismounted for easy cleaning. To dismount the barrel, place the lock on half cock, close the frizzen, remove the ramrod, drift the wedge key past the underlug with a small wood or brass drift and the barrel can be lifted from the stock for easy cleaning. The key is captured to the stock to prevent loss and the barrel channel is bedded.

The rounded toe of the butt is an extension of the ballister wrist, when viewed from below. The French gray triggerguard has a acorn final. The forend is fitted with a water buffalo horn forend cap. The ramrod is also fitted with a flared water buffalo horn tip. The ramrod has no provisions for threaded accessories. The ramrod fits very snugly in the ramrod pipes.The lock is secured with two lock bolts mounted through small steel sideplates.

The English Twigg lock by R. E. Davis, is made in the style of John Twigg. A London maker he was famous for fowling guns in the 1760 to 1770 era. The lock has been finished with a French gray. The lock has a heavy mainspring, to provide a shower of sparks, and the frizzen is adjusted to snap open smartly when fired. We recommend our 1" knapped English gun flints for this lock. The vent is perfectly positioned slightly above the pan's center, to serve as a window to admit the intense light and heat of the incandescent flash of the priming. The old London gun makers were masters. They understood practical physics, and we can learn much from them. The trigger provides a very smooth release, fine tuned to be light and crisp.

This flint fowling gun has a late 18th to early 19th century appearance. The 20 gauge bore and octagon-to-round barrel make this flintlock fowler light weight and handy. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

.595" round balls, pure lead, hand cast, per 50
.595" round balls, pure lead, hand cast, per 50
Part Number: BALL-595-X
Availability: In Stock
Price: $12.99
Order Quantity:
.600" round balls, pure lead, hand cast, per 25
.600" round balls, pure lead, hand cast, per 25
Part Number: BALL-600-X
Availability: In Stock
Price: $9.99
Order Quantity:
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $3.99
Order Quantity:
Bore mop, 100% Cotton, for .62 caliber, 10-32 thread, washable
Bore mop, 100% Cotton, for .62 caliber, 10-32 thread, washable
Part Number: BORE-MOP-62-10
Availability: In Stock
Price: $3.19
Order Quantity:
Ball puller, steel screw, .62 caliber brass collar, 10-32 thread
Ball puller, steel screw, .62 caliber brass collar, 10-32 thread
Part Number: BP-62-10
Availability: In Stock
Price: $4.50
Order Quantity:
Bore brush, bronze, for .62 caliber, 10-32 thread
Bore brush, bronze, for .62 caliber, 10-32 thread
Part Number: BRUSH-62-10
Availability: In Stock
Price: $2.99
Order Quantity:
Button jagged cleaning tip, 20 gauge, brass, 10-32 thread
Button jagged cleaning tip, 20 gauge, brass, 10-32 thread
Part Number: JAG-20-10
Availability: In Stock
Price: $3.99
Order Quantity:
Lee .600" round ball mold,
double cavity, with handles,
for .62 rifles and 20 gauge guns.
Lee .600" round ball mold, double cavity, with handles, for .62 rifles and 20 gauge guns.
Part Number: LEE-600-DC
Availability: In Stock
Price: $22.59
Order Quantity:
Mold, Lyman .600" round ball mold blocks, single cavity, use large handles
Mold, Lyman .600" round ball mold blocks, single cavity, use large handles
Part Number: LYMAN-600
Availability: In Stock
Price: $78.99
Order Quantity:
Handles for large mold blocks,
by Lyman,
fits all current single and double cavity molds
Handles for large mold blocks, by Lyman, fits all current single and double cavity molds
Part Number: LYMAN-H-L
Availability: In Stock
Price: $41.99
Order Quantity:
Trapper's MINK OIL TALLOW,
patch grease,
for match shooting & cold weather hunting,
one 8 oz. tin
Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin
Part Number: MINK-OIL
Availability: In Stock
Price: $6.99
Order Quantity:
Shooting patches, .015" cotton, .60 - .69 caliber, per 100, dry
Shooting patches, .015" cotton, .60 - .69 caliber, per 100, dry
Part Number: OX-15-60-D
Availability: In Stock
Price: $3.39
Order Quantity:
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Part Number: OX-CLEAN-58C
Availability: In Stock
Price: $3.89
Order Quantity:
Ramrod, 7/16" hickory, 48" long, brass tip, 10-32 thread
Ramrod, 7/16" hickory, 48" long, brass tip, 10-32 thread
Part Number: RAMROD-7-10-B
Availability: In Stock
Price: $15.99
Order Quantity:
Buckshot #4
.240" round balls, lead,
by Hornady, 5 pounds
Buckshot #4 .240" round balls, lead, by Hornady, 5 pounds
Part Number: SHOT-4
Availability: In Stock
Price: $28.99
Order Quantity:
Bird Shot #7,
chilled lead shot,
5 pound box, blend of #7 & #8,
safe for use in antique
black powder shotguns
and fowling guns
Bird Shot #7, chilled lead shot, 5 pound box, blend of #7 & #8, safe for use in antique black powder shotguns and fowling guns
Part Number: SHOT-BIRD-7
Availability: In Stock
Price: $17.59
Order Quantity:
Short Starter, patch & ball starter, 1/2" wooden rod for .54 and larger calibers.
Short Starter, patch & ball starter, 1/2" wooden rod for .54 and larger calibers.
Part Number: ST-8
Availability: In Stock
Price: $6.99
Order Quantity:
20 gauge, .625" ideal for .615" bore, .125" over powder card, 1000, by Circle Fly Wads
20 gauge, .625" ideal for .615" bore, .125" over powder card, 1000, by Circle Fly Wads
Part Number: WAD-20-A
Availability: In Stock
Price: $10.99
Order Quantity:
20 gauge, .625" ideal for .615" bore, .025" over shot card, 1000, by Circle Fly Wads
20 gauge, .625" ideal for .615" bore, .025" over shot card, 1000, by Circle Fly Wads
Part Number: WAD-20-B
Availability: In Stock
Price: $10.99
Order Quantity:
20 gauge, .625" ideal for .615" bore, .500" thick fibre wad, 500, by Circle Fly Wads
20 gauge, .625" ideal for .615" bore, .500" thick fibre wad, 500, by Circle Fly Wads
Part Number: WAD-20-C
Availability: In Stock
Price: $10.99
Order Quantity:
Track's Catalog 18,
Out of Print
Please use our FREE on-line catalog and web site.
Track's Catalog 18, Out of Print Please use our FREE on-line catalog and web site.
Part Number: CATALOG-18
Availability: Book is no longer being printed or produced. Once we sell through our remaining inventory, item will no longer be available.  We will not be getting any more in.
Price: $10.00
  
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2020Track of the Wolf, Inc.
Accepted Credit Cards