Northwest Trade Gun,
20 gauge, 36" tapered octagon-to-round barrel,
flintlock, walnut, brass tacks,
new, unfired, by J.A. Wymore
Part Number: AAS-093
Availability: In Stock
Price: $1,999.00
Order Quantity:
This classic North West Trade Gun, has been stocked in walnut and decorated with brass tacks. This Trade Gun would be an excellent choice for your late Fur Trade impression. Correctly fitted with traditional trade gun hardware, a mix of brass and iron, this .62 caliber smooth bore flint fowling gun is as pretty as it is functional. Ideal for competition, this nice flint fowling gun is fully qualified for use in the NMLRA North West Trade Gun match, using patched round balls at paper targets, and bird shot at clay birds on the trap range. Neatly hand made by contemporary builder J.A. Wymore. Trigger reach is 13-3/4" to fit today's average size shooter. Weight is a modest 7.5 pounds.

The 36" barrel is tapered octagon, with wedding band transitions, and is tapered round to the muzzle. The barrel is nicely finished to a dark brown, with a smooth semi-gloss appearance. The left oblique barrel flat is signed JAW 112. A brass front sight is mounted 1" behind the muzzle. The bore is .615" diameter, for our cast lead round ball and patch. We recommend our .595" pure lead round ball, patched with .010" Ox-Yoke patches, lubricated with Ox-Yoke Wonder Lube, for easy loading. We offer 20 gauge (.62 caliber) wads, cards, and shot for wing shooting. This trade gun has no rear sight, allowing it to qualify under NMLRA Trade Gun Match rules.

Newly made this North West Trade Gun is finished to a warm brown with a golden undertone and rubbed back to best reveal the figure of the walnut stock. The satin oil finish feels smooth to the touch. In new condition, unfired, it has no visible handling marks on the wrist or butt. Correctly fitted with a mix of brass and iron furniture. The square buttplate, serpent sideplate, and ramrod pipes are brass, while the trigger guard is steel. The buttstock, and forearm are decorated with domed brass tacks. The flat top of the comb is decorated with a white buffalo scrimshawed bone inlay.

This bottom view shows the traditional large iron triggerguard, hand burnished and finished to a dark brown to match the barrel. The triggerguard of this North West Trade Gun is correctly surface mounted. Two screws retain the rear of the triggerguard, and a third retains the front. The trade gun is fitted with three ramrod pipes. The ramrod pipes are thin brass, with embossed grooves, much like the corrugations in cardboard, to give the pipes maximum strength against crushing or denting in hard use. The pipes allow the 3/8" ramrod to slide smoothly, to serve the barrel. The ramrod is fitted with a brass tip with 8-32 threads for loading and cleaning accessories.

The Queen Ann flint lock is made in the USA by the L&R Lock Company. This round faced flint lock has a dark brown finish to match the barrel. This big flint lock sparks well using our 7/8" English gun flints, by Joe Dawson. The trigger is pinned high to provide a smooth release. An essential element for fast ignition, the vent is centered on the pan, correctly positioned above the bottom of the pan, to serve as a window, centered on the heat of the incandescent flash.

Three lock bolts screws retain the sideplate and lock. The rear sideplate screw is actually a matching wood screw. The brass sideplate is cast in the form of a serpent, a traditional motif for the North West Gun. Surface mounted sideplate are traditional on this style of smoothbore.. We believe that this stylized serpent sideplate evolved from the flat sideplates, embossed or engraved to resemble a serpent, found on Queen Anne and later English Sea Service muskets.

Perfect for your late Fur Trade impression or to take into the field this Fall. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

.595" round balls, pure lead, hand cast, per 50
.595" round balls, pure lead, hand cast, per 50
Part Number: BALL-595-X
Availability: In Stock
Price: $12.99
Order Quantity:
.600" round balls, pure lead, hand cast, per 25
.600" round balls, pure lead, hand cast, per 25
Part Number: BALL-600-X
Availability: In Stock
Price: $9.99
Order Quantity:
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $3.99
Order Quantity:
Ball puller, steel screw, .62 caliber brass collar, 8-32 thread
Ball puller, steel screw, .62 caliber brass collar, 8-32 thread
Part Number: BP-62-8
Availability: In Stock
Price: $4.50
Order Quantity:
Bore brush, bronze, for .69 caliber, 5/16-27 thread
Bore brush, bronze, for .69 caliber, 5/16-27 thread
Part Number: BRUSH-69
Availability: In Stock
Price: $2.99
Order Quantity:
English gun flint, 7/8 x 1", Fowler, Jaeger, Tulle, Twigg, Hatfield, Chambers
English gun flint, 7/8 x 1", Fowler, Jaeger, Tulle, Twigg, Hatfield, Chambers
Part Number: FLINT-ENG-7
Availability: In Stock
Price: $2.40
Order Quantity:
Pack of 12 English Gun flints 7/8 x 1", Fowler, Jaeger, Tulle, Twigg, Hatfield, Chambers
Pack of 12 English Gun flints 7/8 x 1", Fowler, Jaeger, Tulle, Twigg, Hatfield, Chambers
Part Number: FLINT-ENG-7-PACK-12
Availability: In Stock
Price: $24.00
Order Quantity:
Button jagged cleaning tip, 20 gauge, brass, 8-32 thread
Button jagged cleaning tip, 20 gauge, brass, 8-32 thread
Part Number: JAG-20-8
Availability: In Stock
Price: $3.99
Order Quantity:
Jag, jagged cleaning tip, brass, .62 caliber, 7/16" rod, 8-32 thread
Jag, jagged cleaning tip, brass, .62 caliber, 7/16" rod, 8-32 thread
Part Number: JS-62-7-8
Availability: In Stock
Price: $5.00
Order Quantity:
Mold, Lyman .600" round ball mold blocks, single cavity, use large handles
Mold, Lyman .600" round ball mold blocks, single cavity, use large handles
Part Number: LYMAN-600
Availability: In Stock
Price: $78.99
Order Quantity:
Handles for large mold blocks,
by Lyman,
fits all current single and double cavity molds
Handles for large mold blocks, by Lyman, fits all current single and double cavity molds
Part Number: LYMAN-H-L
Availability: In Stock
Price: $41.99
Order Quantity:
Trapper's MINK OIL TALLOW,
patch grease,
for match shooting & cold weather hunting,
one 8 oz. tin
Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin
Part Number: MINK-OIL
Availability: In Stock
Price: $6.99
Order Quantity:
Shooting patches, .015" cotton, .60 - .69 caliber, per 100, dry
Shooting patches, .015" cotton, .60 - .69 caliber, per 100, dry
Part Number: OX-15-60-D
Availability: In Stock
Price: $3.39
Order Quantity:
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Part Number: OX-CLEAN-58C
Availability: In Stock
Price: $3.89
Order Quantity:
Ramrod, 7/16" hickory, 48" long, brass tip, 8-32 thread
Ramrod, 7/16" hickory, 48" long, brass tip, 8-32 thread
Part Number: RAMROD-7-8-B
Availability: In Stock
Price: $15.99
Order Quantity:
Buckshot #4
.240" round balls, lead,
by Hornady, 5 pounds
Buckshot #4 .240" round balls, lead, by Hornady, 5 pounds
Part Number: SHOT-4
Availability: In Stock
Price: $26.99
Order Quantity:
Bird Shot #7,
chilled lead shot,
5 pound box, blend of #7 & #8,
safe for use in antique
black powder shotguns
and fowling guns
Bird Shot #7, chilled lead shot, 5 pound box, blend of #7 & #8, safe for use in antique black powder shotguns and fowling guns
Part Number: SHOT-BIRD-7
Availability: In Stock
Price: $17.59
Order Quantity:
Short Starter, patch & ball starter, 1/2" wooden rod for .54 and larger calibers.
Short Starter, patch & ball starter, 1/2" wooden rod for .54 and larger calibers.
Part Number: ST-8
Availability: In Stock
Price: $6.99
Order Quantity:
20 gauge, .625" ideal for .615" bore, .125" over powder card, 1000, by Circle Fly Wads
20 gauge, .625" ideal for .615" bore, .125" over powder card, 1000, by Circle Fly Wads
Part Number: WAD-20-A
Availability: In Stock
Price: $10.99
Order Quantity:
20 gauge, .625" ideal for .615" bore, .025" over shot card, 1000, by Circle Fly Wads
20 gauge, .625" ideal for .615" bore, .025" over shot card, 1000, by Circle Fly Wads
Part Number: WAD-20-B
Availability: In Stock
Price: $10.99
Order Quantity:
20 gauge, .625" ideal for .615" bore, .500" thick fibre wad, 500, by Circle Fly Wads
20 gauge, .625" ideal for .615" bore, .500" thick fibre wad, 500, by Circle Fly Wads
Part Number: WAD-20-C
Availability: In Stock
Price: $10.99
Order Quantity:
Track's Catalog 18,
Out of Print
Please use our FREE on-line catalog and web site.
Track's Catalog 18, Out of Print Please use our FREE on-line catalog and web site.
Part Number: CATALOG-18
Availability: Book is no longer being printed or produced. Once we sell through our remaining inventory, item will no longer be available.  We will not be getting any more in.
Price: $10.00
  
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2019Track of the Wolf, Inc.
Accepted Credit Cards