Northwest Trade Gun,
12 gauge, 36" octagon-to-round barrel,
Davis flint lock, curly maple, brass & iron,
new, unfired, by Gary White
Part Number: AAR-513
Availability: Item has been shipped out for inspection, and at this time, is NOT available. You can click "Notify Me" and enter your email address.  We will notify you IF this item becomes available again.
  
This classic North West Trade Gun, has been stocked in modestly figured maple. This Trade Gun would be a excellent choice for your late Fur Trade impression. Correctly fitted with traditional trade gun hardware, a mix of brass and iron, this .73 caliber smoothbore flint fowling gun is as pretty as it is functional. Ideal for competition, this nice flint fowling gun is fully qualified for use in the NMLRA North West Trade Gun match, using patched round balls at paper targets, and bird shot at clay birds on the trap range. Neatly hand made by contemporary builder Dr. Gary White. Trigger reach is 14" to fit today's average size shooter. Weight is a modest 6.7 pounds.

The 36" barrel is tapered octagon, with a transition to sixteen flats, wedding bands, and tapered round to the muzzle. The bore is .730" diameter, for our cast lead round ball and patch. We recommend our .690" pure lead round ball, patched with .010" Ox-Yoke patches, lubricated with Ox-Yoke Wonder Lube, for easy loading. We offer 12 gauge (.73 caliber) wads, cards, and shot for wing shooting. This trade gun has no rear sight, allowing it to qualify under NMLRA Trade Gun Match rules. The 36" long octagon-to-round barrel is nicely finished to a dark brown, with a smooth semi-gloss appearance. A brass front sight is mounted 1-1/2" behind the muzzle.

Newly made this North West Trade Gun is finished to a warm brown with a golden undertone and rubbed back to best reveal the figure of the maple stock. Correctly fitted with a mix of brass and iron furniture. The square buttplate, serpent sideplate, and ramrod pipes are brass, while the trigger guard is steel. The rounded comb of the buttplate is secured with a screw with the slot neatly aligned with the barrel. The wrist is fitted with a trade silver Iroquois cross overlaid, secured with screws and pins, and shaped to conform to the wrist.

This bottom view shows the traditional large iron triggerguard, hand burnished bright which nicely contrasts the color on the maple stock. The triggerguard of this North West Trade Gun is correctly surface mounted. Two screws retain the rear of the triggerguard, and a third retains the front. The trade gun is fitted with three ramrod pipes. A bit fancier than traditional trade gun ramrod pipes the pipes have rings, much like the corrugations in cardboard, to give the pipes maximum strength against crushing or denting in hard use. The pipes allow the 3/8" ramrod to slide smoothly, to serve the barrel. The ramrod is fitted with a jagged brass tip correctly mounted directly to the ramrod.

This round faced lock is designed and styled after early English longrifle, fowlers, and trade guns. The lock is cast with the floral engraving pattern commonly found on many antique locks and has been finished to a dark blue. This big flint lock sparks well using our #Flint-ENG-7 hand knapped English 7/8" gun flints, by Tom Fuller. An essential element for fast ignition, the vent is centered on the pan, correctly positioned above the bottom of the pan, to serve as a window, centered on the heat of the incandescent flash.

Two lock bolts screws retain the sideplate and lock. The rear sideplate screw is actually a wood screw. The brass sideplate is cast in the form of a serpent, a traditional motif for the North West Gun. Surface mounted sideplate are traditional on this style of smoothbore.. We believe that this stylized serpent sideplate evolved from the flat sideplates, embossed or engraved to resemble a serpent, found on Queen Anne and later English Sea Service muskets.

Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

.690" round balls, pure lead, hand cast, per 25
.690" round balls, pure lead, hand cast, per 25
Part Number: BALL-690-X
Availability: In Stock
Price: $12.99
Order Quantity:
.715" round balls, pure lead, hand cast, per 25
.715" round balls, pure lead, hand cast, per 25
Part Number: BALL-715-X
Availability: In Stock
Price: $12.99
Order Quantity:
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $3.99
Order Quantity:
Bore brush, bronze, for .75 caliber, 5/16-27 thread
Bore brush, bronze, for .75 caliber, 5/16-27 thread
Part Number: BRUSH-75
Availability: In Stock
Price: $2.99
Order Quantity:
Fouling Scraper, flat face, brass, .69 caliber, 10-32 thread
Fouling Scraper, flat face, brass, .69 caliber, 10-32 thread
Part Number: FS-69-10
Availability: In Stock
Price: $4.79
Order Quantity:
Black powder, GOEX, 1 pound, made in the USA, 2Fg medium granulation for rifles, shotguns, muskets, cartridges. Shipped in full cases, 25 one pound cans, any mix of granulations, any mix of brands.
Black powder, GOEX, 1 pound, made in the USA, 2Fg medium granulation for rifles, shotguns, muskets, cartridges. Shipped in full cases, 25 one pound cans, any mix of granulations, any mix of brands.
Part Number: GOEX-FFG
Availability: In Stock
Price: $22.52
Order Quantity:
Special Restrictions Apply
Not available for export outside the U.S.A.
Black Powder must be shipped in full cases, 25 one pound cans. Order any mix of granulations, any mix of brands. Shipped in full cases of 25 one pound cans. Minimum order is 25 pounds. Maximum order is 50 pounds.
Black powder, GOEX, 1 pound, made in the USA, 1Fg coarse granulation for large bore shotguns, muskets, cartridges. Shipped in full cases, 25 one pound cans, any mix of granulations, any mix of brands.
Black powder, GOEX, 1 pound, made in the USA, 1Fg coarse granulation for large bore shotguns, muskets, cartridges. Shipped in full cases, 25 one pound cans, any mix of granulations, any mix of brands.
Part Number: GOEX-FG
Availability: In Stock
Price: $22.52
Order Quantity:
Special Restrictions Apply
Not available for export outside the U.S.A.
Black Powder must be shipped in full cases, 25 one pound cans. Order any mix of granulations, any mix of brands. Shipped in full cases of 25 one pound cans. Minimum order is 25 pounds. Maximum order is 50 pounds.
Button jagged cleaning tip, 12 gauge, brass, 10-32 thread
Button jagged cleaning tip, 12 gauge, brass, 10-32 thread
Part Number: JAG-12-10
Availability: In Stock
Price: $3.99
Order Quantity:
Lee .690" round ball mold,
single cavity, with handles
Lee .690" round ball mold, single cavity, with handles
Part Number: LEE-690
Availability: In Stock
Price: $21.99
Order Quantity:
Handles, for bullet mold, LEE Commercial mold handles for six cavity molds, also fit Lyman, RCBS and similar mold blocks.
Handles, for bullet mold, LEE Commercial mold handles for six cavity molds, also fit Lyman, RCBS and similar mold blocks.
Part Number: LEE-HANDLE
Availability: In Stock
Price: $14.99
Order Quantity:
Mold, Lyman .690" round ball mold blocks, single cavity, use large handles
Mold, Lyman .690" round ball mold blocks, single cavity, use large handles
Part Number: LYMAN-690
Availability: In Stock
Price: $75.99
Order Quantity:
Mold, Lyman .715" round ball mold blocks, single cavity, use large handles
Mold, Lyman .715" round ball mold blocks, single cavity, use large handles
Part Number: LYMAN-715
Availability: In Stock
Price: $75.99
Order Quantity:
Handles for large mold blocks,
by Lyman,
fits all current single and double cavity molds
Handles for large mold blocks, by Lyman, fits all current single and double cavity molds
Part Number: LYMAN-H-L
Availability: In Stock
Price: $40.99
Order Quantity:
Trapper's MINK OIL TALLOW,
patch grease,
for match shooting & cold weather hunting,
one 8 oz. tin
Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin
Part Number: MINK-OIL
Availability: In Stock
Price: $6.99
Order Quantity:
Shooting patches, .010" cotton, .50 - .59 caliber, per 100, dry
Shooting patches, .010" cotton, .50 - .59 caliber, per 100, dry
Part Number: OX-10-50-D
Availability: In Stock
Price: $3.29
Order Quantity:
Shooting patches, .015" cotton, .60 - .69 caliber, per 100, dry
Shooting patches, .015" cotton, .60 - .69 caliber, per 100, dry
Part Number: OX-15-60-D
Availability: In Stock
Price: $3.39
Order Quantity:
Shooting patches, .018" pillow ticking, .60 - .69 caliber, per 100, dry
Shooting patches, .018" pillow ticking, .60 - .69 caliber, per 100, dry
Part Number: OX-18-60-D
Availability: In Stock
Price: $3.69
Order Quantity:
Shooting patches, .020" cotton, .60 - .69 caliber, per 100, dry
Shooting patches, .020" cotton, .60 - .69 caliber, per 100, dry
Part Number: OX-20-60-D
Availability: In Stock
Price: $3.39
Order Quantity:
12 gauge shotgun Premium Lubed Wad,
bag of 100 lubricated felt wads
12 gauge shotgun Premium Lubed Wad, bag of 100 lubricated felt wads
Part Number: OX-WAD-12-W
Availability: In Stock
Price: $11.99
Order Quantity:
Ramrod, 7/16" hickory, 48" long, brass tip, 10-32 thread
Ramrod, 7/16" hickory, 48" long, brass tip, 10-32 thread
Part Number: RAMROD-7-10-B
Availability: In Stock
Price: $15.99
Order Quantity:
Adaptor for rod tip, stainless steel, knurled center, 
10-32 male to 5/16-27 female
Adaptor for rod tip, stainless steel, knurled center, 10-32 male to 5/16-27 female
Part Number: SA-10
Availability: In Stock
Price: $2.99
Order Quantity:
Buckshot #4
.240" round balls, lead,
by Hornady, 5 pounds
Buckshot #4 .240" round balls, lead, by Hornady, 5 pounds
Part Number: SHOT-4
Availability: In Stock
Price: $26.99
Order Quantity:
Bird Shot #7,
chilled lead shot,
5 pound box, blend of #7 & #8,
safe for use in antique
black powder shotguns
and fowling guns
Bird Shot #7, chilled lead shot, 5 pound box, blend of #7 & #8, safe for use in antique black powder shotguns and fowling guns
Part Number: SHOT-BIRD-7
Availability: In Stock
Price: $17.59
Order Quantity:
12 gauge, .740" ideal for .729" bore, .125" over powder card, 1000, by Circle Fly Wads
12 gauge, .740" ideal for .729" bore, .125" over powder card, 1000, by Circle Fly Wads
Part Number: WAD-12-A
Availability: In Stock
Price: $9.99
Order Quantity:
12 gauge, .740" ideal for .729" bore, .025" over shot card, 1000, by Circle Fly Wads
12 gauge, .740" ideal for .729" bore, .025" over shot card, 1000, by Circle Fly Wads
Part Number: WAD-12-B
Availability: In Stock
Price: $9.99
Order Quantity:
12 gauge, .740" ideal for .729" bore, .500" thick fibre wad, 500, by Circle Fly Wads
12 gauge, .740" ideal for .729" bore, .500" thick fibre wad, 500, by Circle Fly Wads
Part Number: WAD-12-C
Availability: In Stock
Price: $9.99
Order Quantity:
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
Part Number: WORM-CORK-10
Availability: In Stock
Price: $6.59
Order Quantity:
Track's Catalog 18,
Out of Print
Please use our FREE on-line catalog and web site.
Track's Catalog 18, Out of Print Please use our FREE on-line catalog and web site.
Part Number: CATALOG-18
Availability: Book is no longer being printed or produced. Once we sell through our remaining inventory, item will no longer be available.  We will not be getting any more in.
Price: $10.00
  
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2018Track of the Wolf, Inc.
Accepted Credit Cards