Trade Gun,
20 gauge 44" octagon-to-round barrel,
curly maple, browned iron trim,
Chambers' early Ketland flint lock, used
Part Number: AAQ-504
Availability: In Stock
Price: $999.00
Order Quantity:
This Trade Gun is stocked in curly maple and trimmed in browned iron furniture with a Colerain 20 gauge octagon-to-round barrel and Jim Chambers early Ketland flintlock. This used smoothbore has two visible repairs to the stock, one to the front edge of the lock panel where a section of wood has been cracked and glued, the second at the heel of the buttplate where a small chip has been glued.

The Colerain barrel of the fusil measures 44" in length and has a bright 20 gauge bore that measures .615" diameter for our 20 gauge wads and cards. The tapered octagon breech is 15" long, with a wedding band transition to tapered round. It flares slightly at the muzzle. The barrel has no rear sight and a silver blade front sight is set just behind the muzzle. Thus, this smooth bore gun is legal for use in the popular NMLRA North West Trade Gun matches, shooting bird shot at ten clay birds on the trap range, and shooting round balls at paper targets on the 50 yard range.

Trigger reach is 14" and this fowler weighs 7.6 pounds.

The long ballister wrist runs from the lock panels to the toe, and the comb seems to sit on top of the flowing wrist. The buttplate is tall, nearly flat, formed from sheet stock. This is classic architecture for early English muskets, especially the early Sea Service muskets. The triggerguard is also formed from sheet with a large bow and secured with four screws. The 3/8" diameter ramrod is fitted with a jagged brass tip, it has no provisions for threaded accessories. A final look at the fowler shows off the backside of the gun and the large iron sideplate that has been used. Two dome headed lock bolts pass through the sideplate and stock to engage the early Ketland lock on the opposite side. All of the furniture is finished to a dark matte brown with a light texture. The brown finish shows visible signs of use with wear on areas that are frequently handled and an aged patina at the breech.

Ignition for the gun is provided by this early Ketland English flint lock by Jim Chambers. This flat faced English flint lock is made in the style of the early work of Thomas Ketland. Locks of this design are often found on fowling guns of the 1750-1780 era. Combine it with our #FLINT-ENG-7 hand knapped 7/8" English gun flints for best results. The trigger has a wide curled face with curled tip. The trigger is pinned high to provide good leverage against the sear of the lock.

A stainless steel vent hole is well centered both horizontally and vertically. If your flint longrifle suffers from that infamous slow whoosh-bang ignition delay, study the work of today's best gun makers, and position your vent well centered on the pan, high above the bottom, to serve as a window on the center of the flash.

This used 20 gauge fowler has a number of small handling marks and the noted repairs to the stock. This fowler will make an excellent piece for Colonial French and Indian, or Revolutionary War reenacters portraying a militiaman supplying his own firelock.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

Call us, at 763-633-2500 during business hours, to discuss this nice piece in greater detail, or to place your order by telephone. Have your part numbers and credit card ready. We accept Visa, MasterCard, American Express, or Discover cards. First come - first served, so you may be wise to order now, using our secure On-Line Shopping Cart.

.595" round balls, pure lead, hand cast, per 50
.595" round balls, pure lead, hand cast, per 50
Part Number: BALL-595-X
Availability: In Stock
Price: $12.10
Order Quantity:
.600" round balls, pure lead, hand cast, per 25
.600" round balls, pure lead, hand cast, per 25
Part Number: BALL-600-X
Availability: In Stock
Price: $8.99
Order Quantity:
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $3.99
Order Quantity:
Bore mop, 100% Cotton, for .62 caliber, 10-32 thread, washable
Bore mop, 100% Cotton, for .62 caliber, 10-32 thread, washable
Part Number: BORE-MOP-62-10
Availability: In Stock
Price: $3.19
Order Quantity:
Ball puller, steel screw, .62 caliber brass collar, 10-32 thread
Ball puller, steel screw, .62 caliber brass collar, 10-32 thread
Part Number: BP-62-10
Availability: In Stock
Price: $3.59
Order Quantity:
Bore brush, bronze, for .62 caliber, 10-32 thread
Bore brush, bronze, for .62 caliber, 10-32 thread
Part Number: BRUSH-62-10
Availability: In Stock
Price: $2.99
Order Quantity:
Track's Catalog 18,
432 pages, full color,
filled with Exact Full Size Photos
of most gun parts.
Track's Catalog 18, 432 pages, full color, filled with Exact Full Size Photos of most gun parts.
Part Number: CATALOG-18
Availability: In Stock
Price: $10.00
Order Quantity:
Button jagged cleaning tip, 20 gauge, brass, 10-32 thread
Button jagged cleaning tip, 20 gauge, brass, 10-32 thread
Part Number: JAG-20-10
Availability: In Stock
Price: $3.99
Order Quantity:
Lee .600" round ball mold,
double cavity, with handles,
for .62 rifles and 20 gauge guns.
Lee .600" round ball mold, double cavity, with handles, for .62 rifles and 20 gauge guns.
Part Number: LEE-600-DC
Availability: In Stock
Price: $21.99
Order Quantity:
Mold, Lyman .600" round ball mold blocks, single cavity, use large handles
Mold, Lyman .600" round ball mold blocks, single cavity, use large handles
Part Number: LYMAN-600
Availability: In Stock
Price: $74.99
Order Quantity:
Handles for large mold blocks,
by Lyman,
fits all current single and double cavity molds
Handles for large mold blocks, by Lyman, fits all current single and double cavity molds
Part Number: LYMAN-H-L
Availability: In Stock
Price: $40.99
Order Quantity:
Trapper's MINK OIL TALLOW,
patch grease,
for match shooting & cold weather hunting,
one 8 oz. tin
Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin
Part Number: MINK-OIL
Availability: In Stock
Price: $6.79
Order Quantity:
Shooting patches, .015" cotton, .60 - .69 caliber, per 100, dry
Shooting patches, .015" cotton, .60 - .69 caliber, per 100, dry
Part Number: OX-15-60-D
Availability: In Stock
Price: $3.39
Order Quantity:
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Part Number: OX-CLEAN-58C
Availability: In Stock
Price: $3.89
Order Quantity:
Ramrod, 7/16" hickory, 48" long, brass tip, 10-32 thread
Ramrod, 7/16" hickory, 48" long, brass tip, 10-32 thread
Part Number: RAMROD-7-10-B
Availability: In Stock
Price: $15.99
Order Quantity:
Buckshot #4
.240" round balls, lead,
by Hornady, 5 pounds
Buckshot #4 .240" round balls, lead, by Hornady, 5 pounds
Part Number: SHOT-4
Availability: In Stock
Price: $26.99
Order Quantity:
Bird Shot #7,
chilled lead shot,
5 pound box, blend of #7 & #8,
safe for use in antique
black powder shotguns
and fowling guns
Bird Shot #7, chilled lead shot, 5 pound box, blend of #7 & #8, safe for use in antique black powder shotguns and fowling guns
Part Number: SHOT-BIRD-7
Availability: In Stock
Price: $17.59
Order Quantity:
Short Starter, patch & ball starter, 1/2" wooden rod for .54 and larger calibers.
Short Starter, patch & ball starter, 1/2" wooden rod for .54 and larger calibers.
Part Number: ST-8
Availability: In Stock
Price: $7.99
Order Quantity:
20 gauge, .625" ideal for .615" bore, .125" over powder card, 1000, by Circle Fly Wads
20 gauge, .625" ideal for .615" bore, .125" over powder card, 1000, by Circle Fly Wads
Part Number: WAD-20-A
Availability: In Stock
Price: $8.99
Order Quantity:
20 gauge, .625" ideal for .615" bore, .025" over shot card, 1000, by Circle Fly Wads
20 gauge, .625" ideal for .615" bore, .025" over shot card, 1000, by Circle Fly Wads
Part Number: WAD-20-B
Availability: In Stock
Price: $8.99
Order Quantity:
20 gauge, .625" ideal for .615" bore, .500" thick fibre wad, 500, by Circle Fly Wads
20 gauge, .625" ideal for .615" bore, .500" thick fibre wad, 500, by Circle Fly Wads
Part Number: WAD-20-C
Availability: In Stock
Price: $8.99
Order Quantity:
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773
Tel: 763-633-2500 Fax: 763-633-2550

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2017Track of the Wolf, Inc.
Accepted Credit Cards