English Fowling Gun,
12 gauge with removable choke tube, 42" octagon-to-round barrel,
walnut with checkered wrist, blued iron furniture,
signed by Dr. Gary White
Part Number: AAQ-243
Availability: In Stock
Price: $2,379.00
Order Quantity:
This early flint fowling gun is stocked in black walnut and trimmed in blued iron furniture. The furniture castings are patterned from an antique fowler by Griffin from the mid to late 18th century. The fowler is fitted with a R.E. Davis John Twigg flintlock fitted to a Colerain 42" octagon-to-round barrel. Signed by contemporary builder Dr. Gary White the Colerain barrel has been fitted with cylinder bore choke tube Dr. White. This fowler is lightly used, with few handling marks.

The Griffin fowler barrel by Colerain is 42'' tapered octagon-to-round with a 14" tapered octagon breech with a single wedding band to round. The 12 gauge bore measures .730" diameter. The barrel is fitted with cylinder bore choke currently so it could be used with a patched round ball or loaded with shot. A tall steel blade front sight is fitted behind the muzzle.
The black walnut stock displays some figure in the buttstock. The long ballister wrist fades into the comb, in early English style. The wrist is checkered with large diamonds, typical of early checkering patterns. The black walnut stock was soaked in pine oil and finished with thin coats of Laurel Mountain Forge finish rubbed to a satin sheen.

This 12 gauge smoothbore weighs only 8.3 pounds. The trigger reach is 14-1/2'', which will fit todays larger or taller shooter well.
Trimmed in steel castings patterned from an antique fowler and have the engraved pattern including a bow, quiver of arrows, and axe. The thumbpiece has flowing scrolls and a floral design on the border. The breech end of the barrel is signed on the top flat G. B. White.
The rounded toe of the butt is an extension of the ballister wrist, when viewed from below. The toe has a few small scattered handling marks from use. The rust blued triggerguard has the potted plant finial at front, often found on London made guns. The triggerguard bow and grip rail are decorated with the antique engraving pattern.

The fowler is fitted with three forward and one skirted entry pipe. This fowler is fitted with a 1/4" diameter steel ramrod with a jagged brass tip installed. The ramrod has no provisions for threaded accessories.
The English Twigg lock by R. E. Davis, is made in the style of John Twigg. A London maker he was famous for fowling guns in the 1760 to 1770 era. The lock has been finished with a dark blue and the finish on the tail has lightened from handling. The lock has a heavy mainspring, to provide a shower of sparks, and the frizzen is adjusted to snap open smartly when fired. This lock has been fired, based on the scratches on the frizzen face.

The vent is perfectly positioned slightly above the pan's center, to serve as a window to admit the intense light and heat of the incandescent flash of the priming. The old London gun makers were masters. They understood practical physics, and we can learn much from them. Mr. Brooks has achieved the original London style, appearance, and function.
The lock is secured with two lock bolts mounted through a decorative steel sideplate. The sideplate is shaped with flowing curves and finished with a fire blue. The trigger provides a very smooth release, fine tuned to be light and crisp.

This flint fowling gun has a mid 18th century appearance. The barrel has a removable choke tube installed. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

Call us, at 763-633-2500 during business hours, to discuss this nice piece in greater detail, or to place your order by telephone. Have your part numbers and credit card ready. We accept Visa, MasterCard, American Express, or Discover cards. First come - first served, so you may be wise to order now, using our secure On-Line Shopping Cart.

.690" round balls, pure lead, hand cast, per 25
.690" round balls, pure lead, hand cast, per 25
Part Number: BALL-690-X
Availability: In Stock
Price: $11.90
Order Quantity:
.715" round balls, pure lead, hand cast, per 25
.715" round balls, pure lead, hand cast, per 25
Part Number: BALL-715-X
Availability: In Stock
Price: $12.70
Order Quantity:
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $3.99
Order Quantity:
Bore brush, bronze, for .75 caliber, 5/16-27 thread
Bore brush, bronze, for .75 caliber, 5/16-27 thread
Part Number: BRUSH-75
Availability: In Stock
Price: $2.99
Order Quantity:
Track's Catalog 18,
432 pages, full color,
filled with Exact Full Size Photos
of most gun parts.
Track's Catalog 18, 432 pages, full color, filled with Exact Full Size Photos of most gun parts.
Part Number: CATALOG-18
Availability: In Stock
Price: $10.00
Order Quantity:
Fouling Scraper, flat face, brass, .69 caliber, 10-32 thread
Fouling Scraper, flat face, brass, .69 caliber, 10-32 thread
Part Number: FS-69-10
Availability: In Stock
Price: $4.49
Order Quantity:
Black powder, GOEX, 1 pound, made in the USA, 2Fg medium granulation for rifles, shotguns, muskets, cartridges. Shipped in full cases, 25 one pound cans, any mix of granulations, any mix of brands.
Black powder, GOEX, 1 pound, made in the USA, 2Fg medium granulation for rifles, shotguns, muskets, cartridges. Shipped in full cases, 25 one pound cans, any mix of granulations, any mix of brands.
Part Number: GOEX-FFG
Availability: In Stock
Price: $22.00
Order Quantity:
Special Restrictions Apply
Not available for export outside the U.S.A.
Black powder, GOEX, 1 pound, made in the USA, 1Fg coarse granulation for large bore shotguns, muskets, cartridges. Shipped in full cases, 25 one pound cans, any mix of granulations, any mix of brands.
Black powder, GOEX, 1 pound, made in the USA, 1Fg coarse granulation for large bore shotguns, muskets, cartridges. Shipped in full cases, 25 one pound cans, any mix of granulations, any mix of brands.
Part Number: GOEX-FG
Availability: In Stock
Price: $22.00
Order Quantity:
Special Restrictions Apply
Not available for export outside the U.S.A.
Button jagged cleaning tip, 12 gauge, brass, 10-32 thread
Button jagged cleaning tip, 12 gauge, brass, 10-32 thread
Part Number: JAG-12-10
Availability: In Stock
Price: $3.99
Order Quantity:
Lee .690" round ball mold,
single cavity, with handles
Lee .690" round ball mold, single cavity, with handles
Part Number: LEE-690
Availability: In Stock
Price: $21.99
Order Quantity:
Handles, for bullet mold, LEE Commercial mold handles for six cavity molds, also fit Lyman, RCBS and similar mold blocks.
Handles, for bullet mold, LEE Commercial mold handles for six cavity molds, also fit Lyman, RCBS and similar mold blocks.
Part Number: LEE-HANDLE
Availability: In Stock
Price: $14.99
Order Quantity:
Mold, Lyman .690" round ball mold blocks, single cavity, use large handles
Mold, Lyman .690" round ball mold blocks, single cavity, use large handles
Part Number: LYMAN-690
Availability: In Stock
Price: $74.99
Order Quantity:
Mold, Lyman .715" round ball mold blocks, single cavity, use large handles
Mold, Lyman .715" round ball mold blocks, single cavity, use large handles
Part Number: LYMAN-715
Availability: In Stock
Price: $74.99
Order Quantity:
Handles for large mold blocks,
by Lyman,
fits all current single and double cavity molds
Handles for large mold blocks, by Lyman, fits all current single and double cavity molds
Part Number: LYMAN-H-L
Availability: In Stock
Price: $40.99
Order Quantity:
Trapper's MINK OIL TALLOW,
patch grease,
for match shooting & cold weather hunting,
one 8 oz. tin
Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin
Part Number: MINK-OIL
Availability: In Stock
Price: $6.79
Order Quantity:
Shooting patches, .010" cotton, .50 - .59 caliber, per 100, dry
Shooting patches, .010" cotton, .50 - .59 caliber, per 100, dry
Part Number: OX-10-50-D
Availability: In Stock
Price: $3.29
Order Quantity:
Shooting patches, .015" cotton, .60 - .69 caliber, per 100, dry
Shooting patches, .015" cotton, .60 - .69 caliber, per 100, dry
Part Number: OX-15-60-D
Availability: In Stock
Price: $3.39
Order Quantity:
Shooting patches, .018" pillow ticking, .60 - .69 caliber, per 100, dry
Shooting patches, .018" pillow ticking, .60 - .69 caliber, per 100, dry
Part Number: OX-18-60-D
Availability: In Stock
Price: $3.69
Order Quantity:
Shooting patches, .020" cotton, .60 - .69 caliber, per 100, dry
Shooting patches, .020" cotton, .60 - .69 caliber, per 100, dry
Part Number: OX-20-60-D
Availability: In Stock
Price: $3.39
Order Quantity:
12 gauge shotgun Premium Lubed  Wad,
bag of 100 lubricated felt wads
12 gauge shotgun Premium Lubed Wad, bag of 100 lubricated felt wads
Part Number: OX-WAD-12-W
Availability: In Stock
Price: $11.99
Order Quantity:
Ramrod, 7/16" hickory, 48" long, brass tip, 10-32 thread
Ramrod, 7/16" hickory, 48" long, brass tip, 10-32 thread
Part Number: RAMROD-7-10-B
Availability: In Stock
Price: $15.99
Order Quantity:
Adaptor for rod tip, stainless steel, knurled center, 
10-32 male to 5/16-27 female
Adaptor for rod tip, stainless steel, knurled center, 10-32 male to 5/16-27 female
Part Number: SA-10
Availability: In Stock
Price: $2.99
Order Quantity:
Buckshot #4
.240" round balls, lead,
by Hornady, 5 pounds
Buckshot #4 .240" round balls, lead, by Hornady, 5 pounds
Part Number: SHOT-4
Availability: In Stock
Price: $26.99
Order Quantity:
Bird Shot #7,
chilled lead shot,
5 pound box, blend of #7 & #8,
safe for use in antique
black powder shotguns
and fowling guns
Bird Shot #7, chilled lead shot, 5 pound box, blend of #7 & #8, safe for use in antique black powder shotguns and fowling guns
Part Number: SHOT-BIRD-7
Availability: In Stock
Price: $17.59
Order Quantity:
12 gauge, .740" ideal for .729" bore, .125" over powder card, 1000, by Circle Fly Wads
12 gauge, .740" ideal for .729" bore, .125" over powder card, 1000, by Circle Fly Wads
Part Number: WAD-12-A
Availability: In Stock
Price: $8.99
Order Quantity:
12 gauge, .740" ideal for .729" bore, .025" over shot card, 1000, by Circle Fly Wads
12 gauge, .740" ideal for .729" bore, .025" over shot card, 1000, by Circle Fly Wads
Part Number: WAD-12-B
Availability: In Stock
Price: $8.99
Order Quantity:
12 gauge, .740" ideal for .729" bore, .500" thick fibre wad, 500, by Circle Fly Wads
12 gauge, .740" ideal for .729" bore, .500" thick fibre wad, 500, by Circle Fly Wads
Part Number: WAD-12-C
Availability: In Stock
Price: $8.99
Order Quantity:
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
Part Number: WORM-CORK-10
Availability: In Stock
Price: $5.99
Order Quantity:
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773
Tel: 763-633-2500 Fax: 763-633-2550

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2017Track of the Wolf, Inc.
Accepted Credit Cards