French Holster Pistol
.62 caliber, 10" octagon-to-round barrel,
walnut stock, browned iron trim,
new, unfired, by L. Day III
Part Number: AAT-337
Availability: Item has been shipped out for inspection, and at this time, is NOT available. You can click "Notify Me" and enter your email address.  We will notify you IF this item becomes available again.
  
This holster pistol by contemporary builder Leonard Day III is stocked in walnut and trimmed in browned iron furniture. The Classic European flintlock and tapered octagon-to-round smoothbore barrel are also finished to a dark plumb brown. This pistol is similar in overall style to a light dragoon pistol from the 1740's. The weight of the gun is 2.5 pounds and it fits comfortably into the average size mans hand. This pistol would make a great piece for an impression of the French and Indian War or the American Revolutionary War.

This classic European flint lock is a refined early style lock, with a pointed tail on the lock plate. The lock plate has a flat face with chamfered edges. The plate is made with an integral pan and a bridle arm to support the frizzen pivot screw, which was a advanced feature on a early lock. .A vent hole has been directly drilled into the barrel to give the priming flash a straight path to the main charge.

From above the .62 caliber smoothbore barrel is 10" tapered octagon-to-round. A single wedding band is located 4" inches forward of the breech. At the rear of the barrel a straight tang projects toward the wrist, a single tang bolt engages the tang on top and the triggerplate below. Surrounding the tang is an area of raised carving that transitions into the raised moldings on the lock panels. The grip is adorned with a browned iron thumbpiece decorated with a C scrolls and a crown. The walnut stock has been stained a medium brown and the finish has a satin sheen. The forearm of the stock is shaped with a raised molding just below the upper edge of the ramrod channel.

Our bottom view shows off the browned iron grip cap and retainer, dragoon style triggerguard, as well as the ringed ramrod pipes. Note the extension of the grip cap that runs up the wrist, this is seen on both sides and is a common feature on military pistols of the time. A raised molding is shaped around the ramrod channel and skirt of the ramrod entry pipe. The ramrod has no provisions for threaded accessories. A browned iron band protects the end grain at the muzzle end of the stock. This backside view of the gun shows the sideplate that is engraved with a border and flaming torch decorations on the ends.

Neatly constructed this French influenced holster pistol would be ideal for a French and Indian War or Revolutionary War reenactor, consider this dragoon pistol for your impression. This pistol is new, unfired. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

.600" round balls, pure lead, hand cast, per 25
.600" round balls, pure lead, hand cast, per 25
Part Number: BALL-600-X
Availability: In Stock
Price: $15.49
Order Quantity:
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $4.19
Order Quantity:
Powder Measure,
30 grains of FFFg black powder,
solid brass, made in the USA.
Powder Measure, 30 grains of FFFg black powder, solid brass, made in the USA.
Part Number: M-030
Availability: In Stock
Price: $4.59
Order Quantity:
Powder measure, brass,
adjustable 0 to 50 grains,
without spout
Powder measure, brass, adjustable 0 to 50 grains, without spout
Part Number: MA-050
Availability: In Stock
Price: $11.99
Order Quantity:
Primitive Scissors Mold,
.600" round ball,
for .62 caliber rifle, or 20 gauge fowling gun,
blued steel, with sprue nipper handles
Primitive Scissors Mold, .600" round ball, for .62 caliber rifle, or 20 gauge fowling gun, blued steel, with sprue nipper handles
Part Number: MOLD-BAG-600
Availability: Out of Stock, request notification when available.
Price: $40.99
  
Folding Lead Ladle, 
hand forged, blued steel,
folds to 5-1/4" length
Folding Lead Ladle, hand forged, blued steel, folds to 5-1/4" length
Part Number: MOLD-BAG-LADLE
Availability: Out of Stock, request notification when available.
Price: $24.50
  
Shooting patches, .010" cotton, .60 - .69 caliber, per 100, wonder-lube
Shooting patches, .010" cotton, .60 - .69 caliber, per 100, wonder-lube
Part Number: OX-10-60-W
Availability: In Stock
Price: $6.19
Order Quantity:
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Part Number: OX-CLEAN-58C
Availability: In Stock
Price: $4.29
Order Quantity:
Pistol loading rod and short starter with .62 caliber cleaning jag, 
7/16" diameter hickory rod, 10-32 threads,
12" overall usable length including .62 caliber cleaning jag
Pistol loading rod and short starter with .62 caliber cleaning jag, 7/16" diameter hickory rod, 10-32 threads, 12" overall usable length including .62 caliber cleaning jag
Part Number: PL-7-62
Availability: In Stock
Price: $17.48
Order Quantity:
Thomas Pickering's Tool,
for flint rifles & pistols,
the first U. S. issue gun tool,
designed by our first U. S. Quartermaster
Thomas Pickering's Tool, for flint rifles & pistols, the first U. S. issue gun tool, designed by our first U. S. Quartermaster
Part Number: TOOL-PICK-S
Availability: In Stock
Price: $11.99
Order Quantity:
Mainspring Vise,
deluxe English style,
for safely compressing a mainspring,
made in the U.S.A.
Mainspring Vise, deluxe English style, for safely compressing a mainspring, made in the U.S.A.
Part Number: TOOL-VISE-DX
Availability: In Stock
Price: $29.99
Order Quantity:
Patch puller, primitive corkscrew worm, small, steel, fits plain rod
Patch puller, primitive corkscrew worm, small, steel, fits plain rod
Part Number: WORM-PR-S
Availability: Out of Stock, request notification when available.
Price: $1.99
  
Track's Catalog 18,
Out of Print
Please use our FREE on-line catalog and web site.
Track's Catalog 18, Out of Print Please use our FREE on-line catalog and web site.
Part Number: CATALOG-18
Availability: Book is no longer being printed or produced. Once we sell through our remaining inventory, item will no longer be available.  We will not be getting any more in.
Price: $10.00
  
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2021Track of the Wolf, Inc.
Accepted Credit Cards