Southern Longrifle,
.40 caliber, 36" Green Mountain barrel,
Chamber's flintlock, cherry, iron trim,
new, by Dave Minnich
Part Number: AAT-739
Availability: In Stock
Price: $1,999.00
Order Quantity:
The unique style of Southern Mountain rifles originated from the Western Carolinas into Eastern Tennessee during the late 18th and early 19th century. This Tennessee Mountain rifle is stocked in cherry and trimmed in iron furniture with an Appalachian appearance. This rifle is fitted with a Jim Chamber's Classic Ketland flint lock and .40 caliber Green Mountain barrel. Assembled by contemporary builder Dave Minnich. This rifle is stocked with a 13-5/8" trigger reach, for today's average size shooter. This trim longrifle weighs only 6.4 pounds, and will be a pleasure to carry afield.

The Green Mountain .40 caliber cut rifled barrel measures 36" by 13/16" octagon. Rifled with eight lands and grooves with a 1 in 48" twist for patched round ball. Green Mountain barrels are machined from high quality American made bar stock, A.I.S.I. 1137 modified, stress relieved, annealed, certified rifle barrel quality steel. All barrels are drilled from solid stock, reamed to a high degree of smoothness, then optically checked for straightness. Very close tolerances are maintained. We recommend our .395" pure lead round ball, patched with .017" Ox-Yoke ticking, lubricated with our Mink Oil patch grease, or other animal fat lubricant, if you require best accuracy. The brass blade front sight is dovetailed behind the muzzle. The barrel is finished to a silvery/gray textured antique patina. The top flat is signed Minnich. A flat top rear sight is dovetailed 6" ahead of the breech.
.
The cherry stock is finished to a light brown with a backwoods appearance. This mountain rifle is a full dress Tennessee rifle with iron buttplate, muzzle cap, and entry pipe. All of the iron furniture is finished to an antique appearance to match the patina finish on the rest of the rifle. The buttplate is formed from sheet stock with a brazed joint at the heel, just like an antique rifle. The barrel is breeched with a short straight tang with one bolt that passes through to engage the iron trigger plate below. The stock does have a filler repair at the rear of the rounded tang.

From below the iron toeplate with lollipop finial can be seen. The toeplate protects the fragile toe area, which is otherwise often susceptible to dents and chips during loading and cleaning. The iron triggerguard is securely mounted to the stock with a screw in the rear and a pin up front. The forearm is shaped with a slender profile, the forend has the traditional flat panels and a iron muzzlecap protects the end grain of the stock. Two iron ramrod pipes and matching entry pipe secure the slender 5/16" diameter ramrod to the rifle. The wooden ramrod is fitted with a iron tip threaded 8-32 for loading and cleaning accessories. The ramrod has been left long by 1/2". Two lock bolts are mounted through a large iron sideplates. No cheek piece is carved on the buttstock of this rifle.

This rifle is fitted with a Jim Chamber's Classic Ketland flintlock that has been reshaped on the tail. This lock is a fine London design with the frizzen gliding over a roller bearing on the frizzen spring, which is retained by a hidden mounting screw. The lock has been finished to the same antique appearance as the barrel. We recommend our 3/4" knapped flints. The single hand forged trigger provides a smooth release of the lock. Fast ignition is assured by the steel vent liner, positioned well above the bottom of the pan, centered on the heat of the flash. If your flint longrifle suffers from that infamous slow whoosh-bang ignition delay, study the work of today's best gun makers, and position your vent well centered on the pan, high above the bottom, to serve as a window on the center of the flash.

In new condition with an antique appearance, this .40 caliber longrifle has a modest weight and will be a joy to carry on your next small game hunt. It will serve you well in the woods or at the range. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

.389" round balls, pure lead, hand cast, per 100
.389" round balls, pure lead, hand cast, per 100
Part Number: BALL-389-X
Availability: In Stock
Price: $16.69
Order Quantity:
.395" round balls, pure lead, Hornady, per 100
.395" round balls, pure lead, Hornady, per 100
Part Number: BALL-395
Availability: In Stock
Price: $10.99
Order Quantity:
.395" round balls, pure lead, hand cast, per 100
.395" round balls, pure lead, hand cast, per 100
Part Number: BALL-395-X
Availability: In Stock
Price: $16.69
Order Quantity:
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $4.19
Order Quantity:
Ball puller, steel screw, .40 caliber brass collar, 8-32 thread
Ball puller, steel screw, .40 caliber brass collar, 8-32 thread
Part Number: BP-40-8
Availability: In Stock
Price: $3.69
Order Quantity:
Fouling Scraper, flat face, brass, .40 caliber, 8-32 thread
Fouling Scraper, flat face, brass, .40 caliber, 8-32 thread
Part Number: FS-40-8
Availability: In Stock
Price: $4.09
Order Quantity:
Jag, jagged cleaning tip, brass, .40 caliber, 3/8" rod, 8-32 thread
Jag, jagged cleaning tip, brass, .40 caliber, 3/8" rod, 8-32 thread
Part Number: JS-40-6-8
Availability: In Stock
Price: $4.29
Order Quantity:
Powder measure, brass, adjustable 0 to 120 grains, with spout
Powder measure, brass, adjustable 0 to 120 grains, with spout
Part Number: MAS-120
Availability: In Stock
Price: $18.99
Order Quantity:
Trapper's MINK OIL TALLOW,
patch grease,
for match shooting & cold weather hunting,
one 8 oz. tin
Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin
Part Number: MINK-OIL
Availability: In Stock
Price: $7.49
Order Quantity:
Shooting patches, .015" cotton, .40 - .49 caliber, per 100, dry
Shooting patches, .015" cotton, .40 - .49 caliber, per 100, dry
Part Number: OX-15-40-D
Availability: In Stock
Price: $3.65
Order Quantity:
Pick & Brush,
brass brush with steel vent pick
Pick & Brush, brass brush with steel vent pick
Part Number: PICK-BRUSH
Availability: Out of Stock, request notification when available.
Price: $12.00
  
Pick & Pan Brush,
with brass chain, button clasp,
and black bristle brush,
for flint musket, rifle, or fowler
Pick & Pan Brush, with brass chain, button clasp, and black bristle brush, for flint musket, rifle, or fowler
Part Number: PICK-BRUSH-H
Availability: In Stock
Price: $13.99
Order Quantity:
Forged steel vent pick,
2-1/2" long, for rifle
Forged steel vent pick, 2-1/2" long, for rifle
Part Number: PICK-VENT-2
Availability: In Stock
Price: $2.99
Order Quantity:
Ramrod, 3/8" hickory, 48" long, brass tip, 8-32 thread
Ramrod, 3/8" hickory, 48" long, brass tip, 8-32 thread
Part Number: RAMROD-6-8-B
Availability: In Stock
Price: $17.99
Order Quantity:
Short Starter, patch & ball starter, with 3/8" hickory rod for .40 to .45 caliber.
Short Starter, patch & ball starter, with 3/8" hickory rod for .40 to .45 caliber.
Part Number: ST-6
Availability: In Stock
Price: $8.49
Order Quantity:
Patch puller, corkscrew worm, steel, brass base, 8-32 thread
Patch puller, corkscrew worm, steel, brass base, 8-32 thread
Part Number: WORM-CORK-8
Availability: In Stock
Price: $6.89
Order Quantity:
Track's Catalog 18,
Out of Print
Please use our FREE on-line catalog and web site.
Track's Catalog 18, Out of Print Please use our FREE on-line catalog and web site.
Part Number: CATALOG-18
Availability: Book is no longer being printed or produced. Once we sell through our remaining inventory, item will no longer be available.  We will not be getting any more in.
Price: $10.00
  
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2021Track of the Wolf, Inc.
Accepted Credit Cards