Maryland Longrifle,
.54 caliber, 39" straight octagon barrel,
maple, brass trim, large Siler flintlock,
double set triggers, new, unfired, by J.A. Wymore
Part Number: AAT-733
Availability: Item has been shipped out for inspection, and at this time, is NOT available. You can click "Notify Me" and enter your email address.  We will notify you IF this item becomes available again.
  
This classic fullstock flint rifle has the architecture of Emmitsburg, Maryland gunmakers such as John Armstrong. Stocked in maple, stained to the best reveal the figure. The large Siler flintlock and straight octagon barrel are finished to a dark brown. Trigger reach is 14", to fit todays average size shooter. This slender rifle weighs only 8.9 pounds. The rifle is signed by contemporary maker J.A. Wymore at the breech.

The .54 caliber 39" long Colerain barrel is 15/16" straight octagon. The bore is cut rifled with six lands and radius grooves with a 1 in 56" twist for a tightly patched round ball. Colerain rifle barrels are drilled from solid steel, cut rifled with six "round bottom" grooves. Called “radius groove rifling", Colerain eliminates the sharp inside corner that accumulates fouling. Radius groove rifling cutters are a bit more expensive to make, but Colerain's customers agree that the accuracy, easy loading, and easy cleaning are worth the cost. The bore is bright in new unfired condition. The exterior is finished to a smooth chocolate brown. A browned steel blade front sight is dovetailed 1-1/2" behind the muzzle. A flat top rear sight is dovetailed 10-1/4" ahead of the breech.

The stock is finished to a warm brown with a golden undertone which is very typical for the Maryland region. This rifle has very attractive slender shaping and the furniture is well fitted. The buttplate is a early 19th century design with a tall crescent shape to fit the shooter's shoulder. The cheek angles wider to the rear. It will recoil back, away from your cheek. The bottom view reveals the long brass toeplate, retained with two screws. The triggerguard has a long bow for the double set triggers, and a gently curled grip rail. The rifle is fitted with a 3/8" diameter ramrod with a 10-32 threaded brass tip for loading and cleaning accessories. The side panel is fitted with a long brass sideplate in Emmitsburg, Maryland style. The sideplate is inlet flush with the side panel and hand engraved with a folk art design.

Our view of the lock shows that flint ignition is provided by this well tuned large Siler flintlock. The lock plate is finished to dark brown to match the barrel. The lock has a very strong mainspring, for good sparking. We recommend using a 3/4 by 7/8" knapped flint for best performance. Natural flints spark best, because they are sharper than cut flints. The double lever double set trigger is properly adjusted to fire set or unset and also allows the lock to be cocked, or the trigger set, in any sequence. Adjust the screw between the two triggers, inboard to reduce set trigger release pressure, our outboard to require a stronger pressure. The set trigger can provide very light release, perhaps an ounce or two, for accurate aimed shooting during pleasant weather. Fast ignition is assured by the stainless steel vent liner, positioned well above the bottom of the pan, centered on the heat of the flash. If your flint longrifle suffers from that infamous slow whoosh-bang ignition delay, study the work of today's best gun makers, and position your vent well centered on the pan, high above the bottom, to serve as a window on the center of the flash.

A very neatly fitted and finished late 18th to early 19th century Maryland longrifle influenced by the work of John Armstrong. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

.530" round balls, pure lead, Hornady, per 100
.530" round balls, pure lead, Hornady, per 100
Part Number: BALL-530
Availability: Out of Stock, request notification when available.
Price: $17.15
  
.530" round balls, pure lead, hand cast, per 50
.530" round balls, pure lead, hand cast, per 50
Part Number: BALL-530-X
Availability: In Stock
Price: $15.49
Order Quantity:
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $4.19
Order Quantity:
Ball puller, steel screw, .54 caliber brass collar, 10-32 thread
Ball puller, steel screw, .54 caliber brass collar, 10-32 thread
Part Number: BP-54-10
Availability: In Stock
Price: $3.79
Order Quantity:
Bore brush, bronze, for .54 caliber, 10-32 thread
Bore brush, bronze, for .54 caliber, 10-32 thread
Part Number: BRUSH-54-10
Availability: In Stock
Price: $2.99
Order Quantity:
French amber gun flint, 3/4 x 7/8" for standard rifle, large Siler, L&R, most others
French amber gun flint, 3/4 x 7/8" for standard rifle, large Siler, L&R, most others
Part Number: FLINT-AMBER-6
Availability: In Stock
Price: $2.30
Order Quantity:
Fouling Scraper, flat face, brass, .54 caliber, 10-32 thread
Fouling Scraper, flat face, brass, .54 caliber, 10-32 thread
Part Number: FS-54-10
Availability: In Stock
Price: $4.29
Order Quantity:
Powder Horn,
large, 11 to 14",
with antique patina finish
Powder Horn, large, 11 to 14", with antique patina finish
Part Number: HORN-A-L
Availability: Out of Stock, request notification when available.
Price: $69.99
  
Priming Horn,
small, 4 to 5",
with antique patina finish
Priming Horn, small, 4 to 5", with antique patina finish
Part Number: HORN-A-S
Availability: Out of Stock, request notification when available.
Price: $57.99
  
Jag, jagged cleaning tip, brass, .54 caliber, 7/16" rod, 10-32 thread
Jag, jagged cleaning tip, brass, .54 caliber, 7/16" rod, 10-32 thread
Part Number: JS-54-7-10
Availability: In Stock
Price: $5.09
Order Quantity:
Powder measure, brass, adjustable 0 to 120 grains, with spout
Powder measure, brass, adjustable 0 to 120 grains, with spout
Part Number: MAS-120
Availability: In Stock
Price: $18.99
Order Quantity:
Trapper's MINK OIL TALLOW,
patch grease,
for match shooting & cold weather hunting,
one 8 oz. tin
Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin
Part Number: MINK-OIL
Availability: In Stock
Price: $7.49
Order Quantity:
Shooting patches, .018" pillow ticking, .50 - .59 caliber, per 100, dry
Shooting patches, .018" pillow ticking, .50 - .59 caliber, per 100, dry
Part Number: OX-18-50-D
Availability: In Stock
Price: $4.29
Order Quantity:
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Part Number: OX-CLEAN-58C
Availability: In Stock
Price: $4.29
Order Quantity:
Pick & Pan Brush,
with brass chain, button clasp,
and black bristle brush,
for flint musket, rifle, or fowler
Pick & Pan Brush, with brass chain, button clasp, and black bristle brush, for flint musket, rifle, or fowler
Part Number: PICK-BRUSH-H
Availability: In Stock
Price: $13.99
Order Quantity:
Forged steel vent pick,
2-1/2" long, for rifle
Forged steel vent pick, 2-1/2" long, for rifle
Part Number: PICK-VENT-2
Availability: In Stock
Price: $2.99
Order Quantity:
Ramrod, 7/16" hickory, 48" long, brass tip, 10-32 thread
Ramrod, 7/16" hickory, 48" long, brass tip, 10-32 thread
Part Number: RAMROD-7-10-B
Availability: In Stock
Price: $18.99
Order Quantity:
Short Starter, patch & ball starter, 1/2" wooden rod for .54 and larger calibers.
Short Starter, patch & ball starter, 1/2" wooden rod for .54 and larger calibers.
Part Number: ST-8
Availability: In Stock
Price: $8.99
Order Quantity:
Timothy Pickering's Tool,
medium size, for flint rifles & fowling guns,
the first U. S. issue gun tool,
designed by our first U. S. Quartermaster
Timothy Pickering's Tool, medium size, for flint rifles & fowling guns, the first U. S. issue gun tool, designed by our first U. S. Quartermaster
Part Number: TOOL-PICK-M
Availability: In Stock
Price: $11.99
Order Quantity:
Primitive Rifleman's Turn Screw, hand forged tempered steel screwdriver, to fit in a longrifle patchbox
Primitive Rifleman's Turn Screw, hand forged tempered steel screwdriver, to fit in a longrifle patchbox
Part Number: TOOL-TURN-U
Availability: In Stock
Price: $6.99
Order Quantity:
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
Part Number: WORM-CORK-10
Availability: In Stock
Price: $6.89
Order Quantity:
Track's Catalog 18,
Out of Print
Please use our FREE on-line catalog and web site.
Track's Catalog 18, Out of Print Please use our FREE on-line catalog and web site.
Part Number: CATALOG-18
Availability: Book is no longer being printed or produced. Once we sell through our remaining inventory, item will no longer be available.  We will not be getting any more in.
Price: $10.00
  
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2021Track of the Wolf, Inc.
Accepted Credit Cards