Colonial Longrifle,
.50 caliber, 43-1/2" Rice swamped barrel,
Chambers flintlock, curly maple, brass,
new, unfired, by R. Boggs
Part Number: AAS-436
Availability: In Stock
Price: $3,499.00
Order Quantity:
Stocked in curly maple and trimmed in patina finished brass furniture. The design of this Colonial era longrifle rifle appears to have been highly influenced by examples from Tidewater region which had considerable trade with the English. This rifle shows the blend of English and Germanic influences. The large wide buttplate and square cheek piece are of Germanic influence. The large round faced English lock is designed for fast, reliable ignition. This is a fine reproduction of a rifle which would have been used a tool for daily life during the 18th century. Neatly finished and raised carved by contemporary maker R.. Boggs. The trigger reach is about 13-3/4" to fit today's average shooter. Weight is 9.4 pounds.

The 43-1/2" length .50 caliber Rice swamped barrel is cut rifled with seven lands and grooves. Grooves are cut .016" deep, with round bottom rifling. Twist is 1 turn in 66", for .50 caliber round ball. Crown is 60 degree lathe cut and polished. The swamped barrel is light weight due to the taper and flare of the swamped octagon barrel. The thick breech makes the barrel very strong. The thin waist saves weight, and the muzzle flares to bring the front sight to the same sighting plane as the rear sight. The brass blade front sight is dovetailed 2" behind the muzzle. The flat top rear sight is dovetailed 11" ahead of the breech.

Rice Muzzle Loading Rifle Barrels are set between centers and milled octagonal, insuring a centered bore, concentric with the exterior, with no "run-out". Each barrel is stress relieved in an atmosphere controlled electric furnace, to eliminate work hardening or barrel warp, and to dampen harmonic vibrations or barrel whip. After the rifling has been cut, each bore is "ball burnished". A carbide bore-sizing die is pulled through the barrel, to insure bore dimension uniformity, eliminating any tight or loose spots inside the barrel. This critical procedure leaves the top of the lands smooth and polished, equaling the traditional lead lapping procedure. Rice barrels are Match grade quality, with bench rest capability. Rice barrels do not require lapping or extensive shooting to break-in.

This longrifle rifle has a comfortable wide flat buttplate, probably circa 1750 to 1780. The buttplate is hand burnished and patina finished. The stock is decorated with a combination of raised and incised carving at the transition from wrist to comb. A raised molding from the toe to the triggerguard creates a slimming effect. The sliding wooden patchbox is cut with thumb relief for the patchbox spring, and a raised bullet shaped molding. Modest pressure on the patchbox spring allows the door to slide to the rear, revealing a deep cut cavity for storing flints, jags, or other shooting accessories. Lock panels gently taper widest at the rear in early long gun fashion. The flared tang of the breech is surrounded with a panel of raised and incised carving with a potted plant design.

The bottom view reveals the Germanic influenced brass triggerguard, with long grip rail. The forend is slim and graceful, with a very slight Germanic palm swell just behind the ramrod entry pipe. The ramrod pipes are brass with a raised thumbnail skirt on the entry pipe. The 3/8" diameter ramrod is fitted with a steel tip for 8-32 threaded loading and cleaning accessories. A brass muzzle cap protects the end grain of the stock. The large sideplate dominates the side panel. Two domed lock bolts engage the lock opposite. The classic longrifle cheek piece is surrounded by attractive early style raised and incised carving, not too elaborate. Later guns were often more highly decorated than earlier guns.

Ignition is provided by a Jim Chambers round face Virginia lock. Sometimes called a “Queen Anne" lock, this best quality round faced flint lock actually dates from the 1730 to 1770 era, well after Anne's reign ended. Antique locks were often finished bright, this lock has been finished to a dark brown to match the barrel. The lock requires our #FLINT-ENG-7 7/8" knapped English gun flint. The flash hole is positioned well above the bottom of the pan, centered on the heat of the flash. The vent hole has been internally coned to provide good ignition. If your flint longrifle suffers from that infamous slow whoosh-bang ignition delay, study the work of today's best gun makers, and position your vent well centered on the pan, high above the bottom, to serve as a window on the center of the flash. The single wide curled trigger has good leverage, giving this rifle an easy trigger release, and good feel.

We recommend this simple and attractive longrifle for the French & Indian War era reenactor or the Revolutionary War volunteer, seeking a suitable gun for militia duty. This longrifle is new, unfired. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

.490" round balls, pure lead, Hornady, per 100
.490" round balls, pure lead, Hornady, per 100
Part Number: BALL-490
Availability: In Stock
Price: $12.59
Order Quantity:
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $3.99
Order Quantity:
Ball puller, steel screw, .50 caliber brass collar, 10-32 thread
Ball puller, steel screw, .50 caliber brass collar, 10-32 thread
Part Number: BP-50-10
Availability: In Stock
Price: $3.75
Order Quantity:
Bore brush, bronze, for .50 caliber, 10-32 thread
Bore brush, bronze, for .50 caliber, 10-32 thread
Part Number: BRUSH-50-10
Availability: In Stock
Price: $2.99
Order Quantity:
Flint priming flask, throws about 3 grains, brass
Flint priming flask, throws about 3 grains, brass
Part Number: FLASK-PP-3
Availability: In Stock
Price: $14.99
Order Quantity:
English gun flint, 7/8 x 1", Fowler, Jaeger, Tulle, Twigg, Hatfield, Chambers
English gun flint, 7/8 x 1", Fowler, Jaeger, Tulle, Twigg, Hatfield, Chambers
Part Number: FLINT-ENG-7
Availability: In Stock
Price: $2.40
Order Quantity:
Pack of 12 English Gun flints 7/8 x 1", Fowler, Jaeger, Tulle, Twigg, Hatfield, Chambers
Pack of 12 English Gun flints 7/8 x 1", Fowler, Jaeger, Tulle, Twigg, Hatfield, Chambers
Part Number: FLINT-ENG-7-PACK-12
Availability: In Stock
Price: $24.00
Order Quantity:
Fouling Scraper, flat face, brass, .50 caliber, 10-32 thread
Fouling Scraper, flat face, brass, .50 caliber, 10-32 thread
Part Number: FS-50-10
Availability: In Stock
Price: $3.79
Order Quantity:
Powder Horn,
large, 11 to 14",
with antique patina finish
Powder Horn, large, 11 to 14", with antique patina finish
Part Number: HORN-A-L
Availability: In Stock
Price: $69.99
Order Quantity:
Priming Horn,
small, 4 to 5",
with antique patina finish
Priming Horn, small, 4 to 5", with antique patina finish
Part Number: HORN-A-S
Availability: In Stock
Price: $57.99
Order Quantity:
Jag, jagged cleaning tip, brass, .50 caliber, 3/8 rod, 10-32 thread
Jag, jagged cleaning tip, brass, .50 caliber, 3/8 rod, 10-32 thread
Part Number: JS-50-6-10
Availability: In Stock
Price: $4.25
Order Quantity:
Powder measure, brass, adjustable 0 to 120 grains, with spout
Powder measure, brass, adjustable 0 to 120 grains, with spout
Part Number: MAS-120
Availability: In Stock
Price: $14.99
Order Quantity:
Trapper's MINK OIL TALLOW,
patch grease,
for match shooting & cold weather hunting,
one 8 oz. tin
Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin
Part Number: MINK-OIL
Availability: In Stock
Price: $6.99
Order Quantity:
Shooting patches, .015" cotton, .50 - .59 caliber, per 100, dry
Shooting patches, .015" cotton, .50 - .59 caliber, per 100, dry
Part Number: OX-15-50-D
Availability: In Stock
Price: $3.29
Order Quantity:
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Part Number: OX-CLEAN-58C
Availability: Item is currently sold out.
Price: $3.89
Order Quantity:
  
Pick & Pan Brush,
with brass chain, button clasp,
and black bristle brush,
for flint musket, rifle, or fowler
Pick & Pan Brush, with brass chain, button clasp, and black bristle brush, for flint musket, rifle, or fowler
Part Number: PICK-BRUSH-H
Availability: In Stock
Price: $13.99
Order Quantity:
Forged steel vent pick,
2-1/2" long, for rifle
Forged steel vent pick, 2-1/2" long, for rifle
Part Number: PICK-VENT-2
Availability: In Stock
Price: $2.99
Order Quantity:
Ramrod, 3/8" hickory, 48" long, brass tip, 10-32 thread
Ramrod, 3/8" hickory, 48" long, brass tip, 10-32 thread
Part Number: RAMROD-6-10-B
Availability: In Stock
Price: $15.99
Order Quantity:
Short Starter, patch & ball starter, 7/16" hickory rod for .50 caliber.
Short Starter, patch & ball starter, 7/16" hickory rod for .50 caliber.
Part Number: ST-7
Availability: In Stock
Price: $6.99
Order Quantity:
Timothy Pickering's Tool,
for flint muskets,
the first U. S. issue gun tool,
designed by our first U. S. Quartermaster
Timothy Pickering's Tool, for flint muskets, the first U. S. issue gun tool, designed by our first U. S. Quartermaster
Part Number: TOOL-PICK-L
Availability: In Stock
Price: $11.99
Order Quantity:
Timothy Pickering's Tool,
medium size, for flint rifles & fowling guns,
the first U. S. issue gun tool,
designed by our first U. S. Quartermaster
Timothy Pickering's Tool, medium size, for flint rifles & fowling guns, the first U. S. issue gun tool, designed by our first U. S. Quartermaster
Part Number: TOOL-PICK-M
Availability: In Stock
Price: $11.99
Order Quantity:
Primitive Rifleman's Turn Screw, hand forged tempered steel screwdriver, to fit in a longrifle patchbox
Primitive Rifleman's Turn Screw, hand forged tempered steel screwdriver, to fit in a longrifle patchbox
Part Number: TOOL-TURN-U
Availability: In Stock
Price: $6.99
Order Quantity:
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
Part Number: WORM-CORK-10
Availability: In Stock
Price: $6.59
Order Quantity:
Track's Catalog 18,
Out of Print
Please use our FREE on-line catalog and web site.
Track's Catalog 18, Out of Print Please use our FREE on-line catalog and web site.
Part Number: CATALOG-18
Availability: Book is no longer being printed or produced. Once we sell through our remaining inventory, item will no longer be available.  We will not be getting any more in.
Price: $10.00
  
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2019Track of the Wolf, Inc.
Accepted Credit Cards