Christian's Spring Longrifle,
.50 caliber, 42" swamped barrel,
R.E. Davis flintlock, maple, iron trim,
by Steve Losey
Part Number: AAR-775
Availability: In Stock
Price: $1,999.00
Order Quantity:
Stocked in maple this Christian's Spring, Pennsylvania Longrifle reflects the Germanic heritage of those early Colonial settlers. The rifle is trimmed in iron furniture and stocked in maple. In new condition with a patina finish on the iron furniture, the maple stock has no dents, dings, or handling marks. Regular use and handling will give this rifle the appearance of a well maintained antique. Hand shaped from a blank by Steve Losey. Trigger reach is 13-/12" to fit todays average size shooter. Weight is 7.5 pounds.

The 42" swamped octagon Rice Barrel Company gives this longrifle a modest weight, making it easy to handle. The .50 caliber bore is cut rifled with seven lands and grooves. The round bottom grooves are cut .016" deep, with a 1 turn in 66" for a tightly patched round ball. Rice Muzzle Loading Rifle Barrels are set between centers and milled octagonal, insuring a centered bore, concentric with the exterior, with no "run-out". Each barrel is stress relieved in an atmosphere controlled electric furnace, to eliminate work hardening or barrel warp, and to dampen harmonic vibrations or barrel whip. After the rifling has been cut, each bore is "ball burnished". A carbide bore-sizing die is pulled through the barrel, to insure bore dimension uniformity, eliminating any tight or loose spots inside the barrel. This critical procedure leaves the top of the lands smooth and polished, equaling the traditional lead lapping procedure. Rice barrels are Match grade quality, with bench rest capability. Rice barrels do not require lapping or extensive shooting to break-in. The barrel and iron furniture are finished to a speckled gray-brown. The Germanic semi buckhorn rear sight is dovetailed 11-3/4" ahead of the breech. Shooters with corrective lenses or "older" eyes will find the extra distance from the breech easier to use. A tall nickel silver blade front sight with brass base is dovetailed 2" behind the muzzle.

The maple stock has a modest amount of random stripes of figure visible across the buttstock. Lock panels are shaped with a long beaver tail. The stock is finished smooth, regular use will add some handling marks which would give this rifle a well aged appearance on both the metal and wood. The wide flat brass buttplate will spread the recoil from the .50 caliber bore. The tang of the breech is surrounded by a raised and incised carved leaf design. The barrel was filed smooth and finished with a light gray brown patina. The breech end of the barrel is signed S. Losey #92.

No toeplate is fitted to this nice rifle. Instead the buttplate extends past the wood to provide some protection to the wood along the toe. The Germanic style triggerguard is fitted with traditional pins. Ramrod pipes are round with incised rings at each end. The ramrod does not have any tips for threaded accessories. The early buttplate has a pleasant curve, comfortable to aim, it engages your shoulder to minimize recoil. This side view shows the large iron sideplate, which fills the side panel in Germanic fashion. The lock is retained by two domed lock bolts. The stock is shaped with a square cheek piece accented with raise carved C scroll.

This rifle is fitted with a large flat faced flintlock in 1750-1770 era style. This lock is designed without a pan bridle to support the frizzen common to early lock designs. The frizzen is filed to a fancy shape, and the frizzen spring is retained by a blind screw. The frizzen is tightly fitted to the pan to keep your priming powder dry. The frizzen touches the upper edge of the barrel through the range of motion and has rubbed a bright spot on the barrel along upper edge. A stainless steel vent liner is centered on the pan, correctly located in the sunset position, at the pan and frizzen joint. Your priming flash will be centered on this window to the main charge.

This large caliber longrifle features a quality barrel and lock. The hand shaped stock is trimmed in brass furniture. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

.490" round balls, pure lead, Hornady, per 100
.490" round balls, pure lead, Hornady, per 100
Part Number: BALL-490
Availability: In Stock
Price: $12.59
Order Quantity:
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $3.99
Order Quantity:
Ball puller, steel screw, .50 caliber brass collar, 10-32 thread
Ball puller, steel screw, .50 caliber brass collar, 10-32 thread
Part Number: BP-50-10
Availability: In Stock
Price: $3.75
Order Quantity:
Bore brush, bronze, for .50 caliber, 10-32 thread
Bore brush, bronze, for .50 caliber, 10-32 thread
Part Number: BRUSH-50-10
Availability: In Stock
Price: $2.99
Order Quantity:
Flint priming flask, throws about 3 grains, brass
Flint priming flask, throws about 3 grains, brass
Part Number: FLASK-PP-3
Availability: In Stock
Price: $14.99
Order Quantity:
English gun flint, 7/8 x 1", Fowler, Jaeger, Tulle, Twigg, Hatfield, Chambers
English gun flint, 7/8 x 1", Fowler, Jaeger, Tulle, Twigg, Hatfield, Chambers
Part Number: FLINT-ENG-7
Availability: In Stock
Price: $2.40
Order Quantity:
Pack of 12 English Gun flints 7/8 x 1", Fowler, Jaeger, Tulle, Twigg, Hatfield, Chambers
Pack of 12 English Gun flints 7/8 x 1", Fowler, Jaeger, Tulle, Twigg, Hatfield, Chambers
Part Number: FLINT-ENG-7-PACK-12
Availability: In Stock
Price: $24.00
Order Quantity:
Fouling Scraper, flat face, brass, .50 caliber, 10-32 thread
Fouling Scraper, flat face, brass, .50 caliber, 10-32 thread
Part Number: FS-50-10
Availability: In Stock
Price: $3.79
Order Quantity:
Powder Horn,
large, 11 to 14",
with antique patina finish
Powder Horn, large, 11 to 14", with antique patina finish
Part Number: HORN-A-L
Availability: In Stock
Price: $69.99
Order Quantity:
Priming Horn,
small, 4 to 5",
with antique patina finish
Priming Horn, small, 4 to 5", with antique patina finish
Part Number: HORN-A-S
Availability: In Stock
Price: $57.99
Order Quantity:
Jag, jagged cleaning tip, brass, .50 caliber, 3/8 rod, 10-32 thread
Jag, jagged cleaning tip, brass, .50 caliber, 3/8 rod, 10-32 thread
Part Number: JS-50-6-10
Availability: In Stock
Price: $4.25
Order Quantity:
Powder measure, brass, adjustable 0 to 120 grains, with spout
Powder measure, brass, adjustable 0 to 120 grains, with spout
Part Number: MAS-120
Availability: In Stock
Price: $14.99
Order Quantity:
Trapper's MINK OIL TALLOW,
patch grease,
for match shooting & cold weather hunting,
one 8 oz. tin
Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin
Part Number: MINK-OIL
Availability: In Stock
Price: $6.99
Order Quantity:
Shooting patches, .015" cotton, .50 - .59 caliber, per 100, dry
Shooting patches, .015" cotton, .50 - .59 caliber, per 100, dry
Part Number: OX-15-50-D
Availability: In Stock
Price: $3.29
Order Quantity:
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Part Number: OX-CLEAN-58C
Availability: In Stock
Price: $3.89
Order Quantity:
Pick & Pan Brush,
with brass chain, button clasp,
and black bristle brush,
for flint musket, rifle, or fowler
Pick & Pan Brush, with brass chain, button clasp, and black bristle brush, for flint musket, rifle, or fowler
Part Number: PICK-BRUSH-H
Availability: In Stock
Price: $13.99
Order Quantity:
Forged steel vent pick,
2-1/2" long, for rifle
Forged steel vent pick, 2-1/2" long, for rifle
Part Number: PICK-VENT-2
Availability: In Stock
Price: $2.99
Order Quantity:
Ramrod, 3/8" hickory, 48" long, brass tip, 10-32 thread
Ramrod, 3/8" hickory, 48" long, brass tip, 10-32 thread
Part Number: RAMROD-6-10-B
Availability: In Stock
Price: $15.99
Order Quantity:
Short Starter, patch & ball starter, 7/16" hickory rod for .50 caliber.
Short Starter, patch & ball starter, 7/16" hickory rod for .50 caliber.
Part Number: ST-7
Availability: In Stock
Price: $6.99
Order Quantity:
Timothy Pickering's Tool,
for flint muskets,
the first U. S. issue gun tool,
designed by our first U. S. Quartermaster
Timothy Pickering's Tool, for flint muskets, the first U. S. issue gun tool, designed by our first U. S. Quartermaster
Part Number: TOOL-PICK-L
Availability: In Stock
Price: $11.99
Order Quantity:
Timothy Pickering's Tool,
medium size, for flint rifles & fowling guns,
the first U. S. issue gun tool,
designed by our first U. S. Quartermaster
Timothy Pickering's Tool, medium size, for flint rifles & fowling guns, the first U. S. issue gun tool, designed by our first U. S. Quartermaster
Part Number: TOOL-PICK-M
Availability: In Stock
Price: $11.99
Order Quantity:
Primitive Rifleman's Turn Screw, hand forged tempered steel screwdriver, to fit in a longrifle patchbox
Primitive Rifleman's Turn Screw, hand forged tempered steel screwdriver, to fit in a longrifle patchbox
Part Number: TOOL-TURN-U
Availability: In Stock
Price: $6.99
Order Quantity:
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
Part Number: WORM-CORK-10
Availability: In Stock
Price: $6.59
Order Quantity:
Track's Catalog 18,
Out of Print
Please use our FREE on-line catalog and web site.
Track's Catalog 18, Out of Print Please use our FREE on-line catalog and web site.
Part Number: CATALOG-18
Availability: Book is no longer being printed or produced. Once we sell through our remaining inventory, item will no longer be available.  We will not be getting any more in.
Price: $10.00
  
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2019Track of the Wolf, Inc.
Accepted Credit Cards