bullets .459" diameter, 340 grain, for .45-70 Express hunting loads, BallistiCast mold, SPG lube, pack of 50
Part Number: BULLET-459-340-FP
Availability: Out of Stock, request notification when available
Price: $18.99
  
This 340 grain BallistiCast bullet is 340 grain weight for flat shooting EXPRESS loads.

Ideal for black powder cartridges, these bullets are cast of lead alloy, sized to exactly .459" diameter, lubricated with SPG bullet lubricant..

This flat point bullet is recommended for lever action or tubular magazine rifles, each round nose bullet has a flat point. Use only flat point bullets in tubular magazine rifles, to reduce the possibility of accidental discharge due to recoil.

Sold in a pack of fifty (50) sized and lubricated bullets, ready to hand load into your .45-70 or .45 Sharps cartridges, these are boxed in a hard plastic compartment tray, to arrive in perfect condition.

We offer the correct neck expander die, with .459" expander plug, at low cost. Order #LEE-DIE-45-EX die body plus our #DIE-459-EXP expander plug for .459" bullet to allow thumb press fit, without damaging or resizing the cast bullet.

Compress your black powder using the above die body, plus our #WAD-460-B thin white card plus our #DIE-45-COMPRESS powder compression plug for .45-70. Powder must normally be compressed about 5/8" to allow the bullet to seat properly.

If you use your lead bullet, to compress your powder, you will deform the bullet nose, which may not engage your chamber's throat properly.
SPG Black Powder Cartridge Reloading Primer,
revised 9th edition, 20 plus new pages
by Mike Venturino & Steve Garbe
SPG Black Powder Cartridge Reloading Primer, revised 9th edition, 20 plus new pages by Mike Venturino & Steve Garbe
Part Number: BOOK-SPG
Availability: In Stock
Price: $24.99
Order Quantity:
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: Item is currently sold out.
Price: $3.99
Order Quantity:
  
Bore mop, 100% Cotton, for .45 caliber, 10-32 thread, washable
Bore mop, 100% Cotton, for .45 caliber, 10-32 thread, washable
Part Number: BORE-MOP-45-10
Availability: In Stock
Price: $3.19
Order Quantity:
Bore brush, bronze, for .45 caliber, 10-32 thread
Bore brush, bronze, for .45 caliber, 10-32 thread
Part Number: BRUSH-45-10
Availability: In Stock
Price: $2.99
Order Quantity:
bullets .459'' diameter, 480 grain, .449" nose diameter for .45-70 Springfield, Lyman 457-125-AV, SPG lube, BHN 11, pack of 50
bullets .459'' diameter, 480 grain, .449" nose diameter for .45-70 Springfield, Lyman 457-125-AV, SPG lube, BHN 11, pack of 50
Part Number: BULLET-459-500-LYMAN
Availability: Out of Stock, request notification when available
Price: $18.99
  
bullets .459'' diameter, 500 grain, .440" nose diameter for .45-70 Sharps, Lyman 457-125-CM, SPG lube, BHN 11, pack of 50
bullets .459'' diameter, 500 grain, .440" nose diameter for .45-70 Sharps, Lyman 457-125-CM, SPG lube, BHN 11, pack of 50
Part Number: BULLET-459-500-SHARPS
Availability: Out of Stock, request notification when available
Price: $18.99
  
Cartridge Case,
.45-70 Government,
unprimed brass,
correct head stamp,
2.1", by Starline,
each piece, no minimum order
Cartridge Case, .45-70 Government, unprimed brass, correct head stamp, 2.1", by Starline, each piece, no minimum order
Part Number: CASE-45-70
Availability: In Stock
Price: $0.56
Order Quantity:
Special Restrictions Apply
Not available for export outside the U.S.A.
Cartridge Case,
.45-70 Government,
unprimed brass,
correct head stamp,
2.1", by Starline,
50 pieces
Cartridge Case, .45-70 Government, unprimed brass, correct head stamp, 2.1", by Starline, 50 pieces
Part Number: CASE-45-70-PACK-050
Availability: In Stock
Price: $25.50
Order Quantity:
Special Restrictions Apply
Not available for export outside the U.S.A.
Cartridge Case,
.45-70 Government,
unprimed brass,
correct head stamp,
2.1", by Starline,
100 pieces
Cartridge Case, .45-70 Government, unprimed brass, correct head stamp, 2.1", by Starline, 100 pieces
Part Number: CASE-45-70-PACK-100
Availability: In Stock
Price: $49.00
Order Quantity:
Special Restrictions Apply
Not available for export outside the U.S.A.
Track's Catalog 18,
432 pages, full color,
filled with Exact Full Size Photos
of most gun parts.
Track's Catalog 18, 432 pages, full color, filled with Exact Full Size Photos of most gun parts.
Part Number: CATALOG-18
Availability: In Stock
Price: $10.00
Order Quantity:
Neck Expander Plug,
.457" diameter,
to fit our
Lee 7/8-14 die
Neck Expander Plug, .457" diameter, to fit our Lee 7/8-14 die
Part Number: DIE-457-EXP
Availability: In Stock
Price: $2.99
Order Quantity:
Neck Expander Plug,
.458" diameter,
to fit our
Lee 7/8-14 die
Neck Expander Plug, .458" diameter, to fit our Lee 7/8-14 die
Part Number: DIE-458-EXP
Availability: In Stock
Price: $2.99
Order Quantity:
Neck Expander Plug,
.459" diameter,
to fit our
Lee 7/8-14 die
Neck Expander Plug, .459" diameter, to fit our Lee 7/8-14 die
Part Number: DIE-459-EXP
Availability: In Stock
Price: $2.99
Order Quantity:
Neck Expander Plug,
.460" diameter,
to fit our
Lee 7/8-14 die
Neck Expander Plug, .460" diameter, to fit our Lee 7/8-14 die
Part Number: DIE-460-EXP
Availability: In Stock
Price: $2.99
Order Quantity:
Neck Expander Plug,
.461" diameter,
to fit our
Lee 7/8-14 die
Neck Expander Plug, .461" diameter, to fit our Lee 7/8-14 die
Part Number: DIE-461-EXP
Availability: In Stock
Price: $2.99
Order Quantity:
Black powder, GOEX, 1 pound, made in the USA, 2Fg medium granulation for rifles, shotguns, muskets, cartridges. Shipped in full cases, 25 one pound cans, any mix of granulations, any mix of brands.
Black powder, GOEX, 1 pound, made in the USA, 2Fg medium granulation for rifles, shotguns, muskets, cartridges. Shipped in full cases, 25 one pound cans, any mix of granulations, any mix of brands.
Part Number: GOEX-FFG
Availability: In Stock
Price: $22.52
Order Quantity:
Special Restrictions Apply
Not available for export outside the U.S.A. Black Powder must be shipped in full cases, 25 one pound cans. Order any mix of granulations, any mix of brands. Shipped in full cases of 25 one pound cans. Minimum order is 25 pounds. Maximum order is 50 pounds.
Black powder, GOEX, 1 pound, made in the USA, 1Fg coarse granulation for large bore shotguns, muskets, cartridges. Shipped in full cases, 25 one pound cans, any mix of granulations, any mix of brands.
Black powder, GOEX, 1 pound, made in the USA, 1Fg coarse granulation for large bore shotguns, muskets, cartridges. Shipped in full cases, 25 one pound cans, any mix of granulations, any mix of brands.
Part Number: GOEX-FG
Availability: In Stock
Price: $22.52
Order Quantity:
Special Restrictions Apply
Not available for export outside the U.S.A. Black Powder must be shipped in full cases, 25 one pound cans. Order any mix of granulations, any mix of brands. Shipped in full cases of 25 one pound cans. Minimum order is 25 pounds. Maximum order is 50 pounds.
Jag, jagged cleaning tip, brass, .45 caliber, 3/8 rod, 8-32 thread
Jag, jagged cleaning tip, brass, .45 caliber, 3/8 rod, 8-32 thread
Part Number: JS-45-6-8
Availability: In Stock
Price: $3.59
Order Quantity:
Lee Bullet Mold .45-70 caliber, .459" diameter, 405 grain, hollow base U.S. 1873 Government mold, single cavity
Lee Bullet Mold .45-70 caliber, .459" diameter, 405 grain, hollow base U.S. 1873 Government mold, single cavity
Part Number: LEE-90268
Availability: In Stock
Price: $26.99
Order Quantity:
Lee Bullet Mold .45-70 caliber, .457" diameter, 340 grain, flat nose, solid base BPCR mold, double cavity
Lee Bullet Mold .45-70 caliber, .457" diameter, 340 grain, flat nose, solid base BPCR mold, double cavity
Part Number: LEE-90373
Availability: In Stock
Price: $21.99
Order Quantity:
Lee Bullet Mold .45-70 caliber, .457" diameter, 405 grain, flat nose, solid base BPCR mold, double cavity
Lee Bullet Mold .45-70 caliber, .457" diameter, 405 grain, flat nose, solid base BPCR mold, double cavity
Part Number: LEE-90374
Availability: In Stock
Price: $21.99
Order Quantity:
Lee Bullet Mold .45-70 caliber, .457" diameter, 450 grain, flat nose, solid base BPCR mold, double cavity
Lee Bullet Mold .45-70 caliber, .457" diameter, 450 grain, flat nose, solid base BPCR mold, double cavity
Part Number: LEE-90375
Availability: In Stock
Price: $21.99
Order Quantity:
Lee Bullet Mold .45-70 caliber, .457" diameter, 500 grain, flat nose, solid base BPCR mold, double cavity
Lee Bullet Mold .45-70 caliber, .457" diameter, 500 grain, flat nose, solid base BPCR mold, double cavity
Part Number: LEE-90376
Availability: In Stock
Price: $21.99
Order Quantity:
LEE Classic Cast Reloader Press,
for pistol or rifle cartridges
LEE Classic Cast Reloader Press, for pistol or rifle cartridges
Part Number: LEE-90998
Availability: In Stock
Price: $139.99
Order Quantity:
Lee Liquid Alox, 4 oz. bottle
Lee Liquid Alox, 4 oz. bottle
Part Number: LEE-ALOX
Availability: In Stock
Price: $5.99
Order Quantity:
Special Restrictions Apply
Not available for export outside the U.S.A. Only ground shipping to a physical street address in the continental 48 states. Can not be shipped to a P.O. Box.
LEE Loading Dies,
caliber .45-70 Gov't,
including shell holder
LEE Loading Dies, caliber .45-70 Gov't, including shell holder
Part Number: LEE-DIE-45-70
Availability: In Stock
Price: $36.99
Order Quantity:
LEE Neck Expander Die,
7/8-14 thread,
for our neck expander plugs
or powder compression plugs,
each sold separately
LEE Neck Expander Die, 7/8-14 thread, for our neck expander plugs or powder compression plugs, each sold separately
Part Number: LEE-DIE-45-EX
Availability: In Stock
Price: $13.99
Order Quantity:
Handles, for bullet mold, LEE Commercial mold handles for six cavity molds, also fit Lyman, RCBS and similar mold blocks.
Handles, for bullet mold, LEE Commercial mold handles for six cavity molds, also fit Lyman, RCBS and similar mold blocks.
Part Number: LEE-HANDLE
Availability: In Stock
Price: $14.99
Order Quantity:
Shell holder, #8, by LEE, for 38-56, 40-65,& 45-70 to .45-120
Shell holder, #8, by LEE, for 38-56, 40-65,& 45-70 to .45-120
Part Number: LEE-SHELL-08
Availability: In Stock
Price: $3.99
Order Quantity:
SPG Bullet Lubricant,
one 1-1/4 ounce stick, for Black or Smokeless Powder
SPG Bullet Lubricant, one 1-1/4 ounce stick, for Black or Smokeless Powder
Part Number: LUBE-SPG
Availability: In Stock
Price: $4.29
Order Quantity:
Lyman 310 Die Set,
.45-70 Government,
use large 310 handles
Lyman 310 Die Set, .45-70 Government, use large 310 handles
Part Number: LYMAN-310-4570
Availability: In Stock
Price: $73.99
Order Quantity:
Lyman 310 Tool,
large handles for rifle calibers
Lyman 310 Tool, large handles for rifle calibers
Part Number: LYMAN-310-L
Availability: In Stock
Price: $68.99
Order Quantity:
Bullet Mold,
.457" diameter, 330 grain hollow point mold,
single cavity steel mold blocks,
by Lyman
Bullet Mold, .457" diameter, 330 grain hollow point mold, single cavity steel mold blocks, by Lyman
Part Number: LYMAN-457-122
Availability: In Stock
Price: $75.99
Order Quantity:
Bullet Mold,
.457" diameter, 385 grain bullet mold,
single cavity steel mold blocks,
by Lyman
Bullet Mold, .457" diameter, 385 grain bullet mold, single cavity steel mold blocks, by Lyman
Part Number: LYMAN-457-124
Availability: In Stock
Price: $75.99
Order Quantity:
Bullet Mold,
.457" diameter, 500 grain bullet mold,
single cavity steel mold blocks,
by Lyman
Bullet Mold, .457" diameter, 500 grain bullet mold, single cavity steel mold blocks, by Lyman
Part Number: LYMAN-457-125
Availability: In Stock
Price: $75.99
Order Quantity:
Bullet Mold,
.457" diameter, 535 grain bullet mold,
single cavity steel mold blocks,
by Lyman
Bullet Mold, .457" diameter, 535 grain bullet mold, single cavity steel mold blocks, by Lyman
Part Number: LYMAN-457-132
Availability: In Stock
Price: $75.99
Order Quantity:
Bullet Mold,
.457" diameter, 292 grain bullet mold,
single cavity steel mold blocks,
by Lyman
Bullet Mold, .457" diameter, 292 grain bullet mold, single cavity steel mold blocks, by Lyman
Part Number: LYMAN-457-191
Availability: In Stock
Price: $75.99
Order Quantity:
Bullet Mold,
.457" diameter, 405 grain bullet mold,
single cavity steel mold blocks,
by Lyman
Bullet Mold, .457" diameter, 405 grain bullet mold, single cavity steel mold blocks, by Lyman
Part Number: LYMAN-457-193
Availability: Item is currently sold out.
Price: $75.99
Order Quantity:
  
Bullet Mold,
.457" diameter, 400 grain bullet mold,
single cavity steel mold blocks,
by Lyman
Bullet Mold, .457" diameter, 400 grain bullet mold, single cavity steel mold blocks, by Lyman
Part Number: LYMAN-457-643
Availability: In Stock
Price: $75.99
Order Quantity:
Bullet Mold,
.457" diameter, 500 grain bullet mold,
Schmittzer pointed bullet,
single cavity steel mold blocks,
by Lyman
Bullet Mold, .457" diameter, 500 grain bullet mold, Schmittzer pointed bullet, single cavity steel mold blocks, by Lyman
Part Number: LYMAN-457-658
Availability: In Stock
Price: $75.99
Order Quantity:
Case Lube,
2 oz. bottle, by Lyman
Case Lube, 2 oz. bottle, by Lyman
Part Number: LYMAN-CASE-LUBE
Availability: In Stock
Price: $5.99
Order Quantity:
Case Lube Pad,
by Lyman
Case Lube Pad, by Lyman
Part Number: LYMAN-CASE-PAD
Availability: In Stock
Price: $8.79
Order Quantity:
Lyman Three Die Set,
for .45-70 Government
Lyman Three Die Set, for .45-70 Government
Part Number: LYMAN-DIE-45-70
Availability: In Stock
Price: $52.59
Order Quantity:
Handles for large mold blocks,
by Lyman,
fits all current single and double cavity molds
Handles for large mold blocks, by Lyman, fits all current single and double cavity molds
Part Number: LYMAN-H-L
Availability: In Stock
Price: $40.99
Order Quantity:
.457" Sizing & Lube die,
by Lyman
.457" Sizing & Lube die, by Lyman
Part Number: LYMAN-HI-457
Availability: In Stock
Price: $29.99
Order Quantity:
.458" Sizing & Lube die,
by Lyman
.458" Sizing & Lube die, by Lyman
Part Number: LYMAN-HI-458
Availability: In Stock
Price: $29.99
Order Quantity:
.459" Sizing & Lube die,
by Lyman
.459" Sizing & Lube die, by Lyman
Part Number: LYMAN-HI-459
Availability: In Stock
Price: $29.99
Order Quantity:
Shell holder #17,
by Lyman,
fits .40-65 & .45-70 to .45-120
Shell holder #17, by Lyman, fits .40-65 & .45-70 to .45-120
Part Number: LYMAN-SHELL-17
Availability: In Stock
Price: $8.19
Order Quantity:
Trapper's MINK OIL TALLOW,
patch grease,
for match shooting & cold weather hunting,
one 8 oz. tin
Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin
Part Number: MINK-OIL
Availability: In Stock
Price: $6.79
Order Quantity:
Cleaning Patches, 2" diameter, bag of 100, pure cotton flannel, for .30 to .40 caliber
Cleaning Patches, 2" diameter, bag of 100, pure cotton flannel, for .30 to .40 caliber
Part Number: OX-CLEAN-45C
Availability: In Stock
Price: $2.99
Order Quantity:
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773
Tel: 763-633-2500 Fax: 763-633-2550

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2018Track of the Wolf, Inc.
Accepted Credit Cards