Cartridge Case
.44-77 Sharps & Remington Rolling Block,
unprimed brass, correct headstamp,
use large rifle primer, for original antique rifles, each
Part Number: CASE-44-77-RB
Availability: Out of Stock, request notification when available.
Price: $3.39
Special Restrictions Apply
Not available for export outside the U.S.A.
Cartridge Case, 44-77 Sharps & Remington Rolling Block, for original antique rifles, unprimed brass, use large rifle primer.

The .44-77 cartridge was the most popular cartridge in the early American West, until the advent of the .45-70 Government, in 1873. It was widely chambered in original Sharps rifles, Remington Rolling Block rifles, and other single shot rifles. An early bottleneck cartridge, only two loading dies are required.

Recent research and surveys of antique Remington Rolling Block Rifles indicates that Remington cut .44-77 chambers to headspace correctly with .090" thick rims, despite publications indicating .087" rims. These cases are made with .090" rims, to fit antique rifles correctly.

Use the #Lee-Shell-17 shell holder, sold separately, or the RCBS brand shell holder.

Very similar to the .43 Spanish Reformado cartridge, these do not interchange. Remington Rolling Block Rifles can be found in several other similar .43 Egyptian, 11mm Danish, .44-77 and other lesser known cartridge designs.

Not sure which chamber you have? We recommend using our #CERROSAFE low temperature Bismuth alloy, to make a chamber cast. It melts at the temperature of hot water. The work is easy, safe, and will instantly reveal which chamber you have, when you compare the dimensions to those shown in Cartridges of the World, sold separately. It can also be used to measure bore and groove diameter, remove stuck cases after head separation, and many other uses.

This cartridge is essentially identical to the .43 Spanish, except the .43 Spanish uses a .439" bullet, while the .44-77 uses a .446" bullet. Many antique rifles have slightly oversize bores, which will require very soft lead bullets, which expand to fit the bore, or slightly oversize bullets to fit correctly, for best accuracy. Many antique .44-77 rifles have .450" or .451" diameter grooves.
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2021Track of the Wolf, Inc.
Accepted Credit Cards