Manufactured by Aldo Uberti & Co. of Italy. Known as the Colt 1862 Pocket Police revolver, this revolver is neatly finished, with a blued round barrel, half-fluted cylinder, color case hardened frame, brass back-strap and triggerguard, reddish brown walnut grips, and color case hardened loading lever. This revolver is offered as new in the factory box with the paperwork.
The barrel is unmarked on visible surfaces, except for the bottom, which is Cal .36 Black Powder Only - A. Uberti Italy . The .36 caliber revolver has a five shot half fluted cylinder. The 5-1/2" tapered round barrel is fitted with a small bead sight fitted behind the muzzle. The rear sight is a notch in the hammer to maximize the available sight radius. The walnut grips are smoothly finished to fit comfortably in the shooter's hand.
The factory recommends .375" round balls, and each chamber will hold 25 grains of FFFg powder. We recommend 15 grains of GOEX FFFg powder, and a .380" round ball, for best accuracy and best compression. Cover each ball with a small amount of bullet lubricant grease. Despite your best efforts, this revolver will need to be cleaned after 12 or 18 shots. Remove the wedge, barrel, and cylinder. Wipe the face of the cylinder, and wipe the cylinder pin.
If you continue to load and fire a badly fouled revolver, the effort needed to cock and fire the gun will become greater, causing the small internal hand, spring, and cylinder latch to become worn and slightly damaged. Continued abuse will cause the cylinder and latch to become out-of-time. Simple cleaning and maintenance will prevent problems.
This percussion revolver is offered in unfired condition, with the factory box and paperwork. The bore is bright, clean, and ready to shoot. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.
|
|
.375" round balls, pure lead, Hornady, per 100
|
|
|
|
.375" round balls, pure lead, hand cast, per 100
|
|
|
|
.380" round balls, pure lead, hand cast, per 100
|
|
|
|
Choke Tube Lube,
anti-seize grease, 3/4 ounce tube,
by Birchwood Casey
|
|
|
|
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
|
|
|
|
Brass Capper, for No. 11 caps, straight line, made in the USA, by Tedd Cash
|
|
|
|
Powder Flask,
for Colt Pocket Model Revolver,
copper, with embossed Eagle motif,
accepts 8-.75mm threaded spouts
|
|
|
|
Powder Flask, Colt style Unum Flask
accepts 8-.75mm threaded spouts
|
|
|
|
Trapper's MINK OIL TALLOW,
patch grease,
for match shooting & cold weather hunting,
one 8 oz. tin
|
| Part Number:
|
MINK-OIL
|
| Availability:
|
|
|
Price:
|
$8.59
|
|
|
|
Nipple Wrench for Revolvers,
for 1858 Remington .44 Revolver,
.31 & .36 Pocket & Police Model Colt Revolvers,
and other revolvers with a tight nipple recess
|
|
|
|
Cleaning Patches, 1-1/4" diameter, bag of 100, pure cotton flannel, for .22 to .27 caliber
|
|
|
|
Ox-Yoke Revolver Wonder Seal, 100 seals for .36 cal.
|
|
|
|
.36 caliber revolver Wool Wads,
bag of 100 dry felt wads
|
|
|
|
.36 caliber revolver Wonder Wad,
bag of 100 lubricated felt wads
|
|
|
|
Nipple, 12-28 aka 5.5-.9mm metric thread, for most brands of .31/.36 Colt and Remington pocket revolvers and many Uberti 1851, 1860, 1861 Colt & 1858 Remington revolvers, Colt brand second generation 1851 & 1860 revolvers, #11 CCI cap, hardened steel
- Cone length: 0.285"
- Thread journal length: 0.200"
- Overall length: 0.485"
- Diameter of base: 0.295"
|
|
|
|
Nipple, 12-28 aka 5.5-.9mm metric thread, for most brands of.31/.36 Colt and Remington pocket revolvers and many Uberti 1851, 1860, 1861 Colt & 1858 Remington revolvers, Colt brand second generation 1851 & 1860 revolvers, #11 CCI cap, stainless steel
- Cone length: 0.285"
- Thread journal length: 0.200"
- Overall length: 0.485"
- Diameter of base: 0.295"
|
|
|
|
Drift Punch,
knurled brass,
for wedge keys and sights.
|
|