1861 Colt Navy Revolver, .36 caliber, 7-1/2" barrel, percussion, blued, walnut, new, in factory box, by Aldo Uberti

Home > Guns > Percussion guns > Percussion pistols & revolvers

1861 Colt Navy Revolver,
.36 caliber, 7-1/2" barrel,
percussion, blued, walnut,
new, in factory box, by Aldo Uberti

Part Number:	AAW-601
Availability:
Price:	$374.99
Order Quantity:

Known as the Colt Model 1861 Navy revolver, it is .36 caliber with a 7-1/2" blued round barrel, factory engraved cylinder, color case hardened steel frame, blued steel back strap and triggerguard, with walnut grips. Manufactured by Aldo Uberti & Company of Italy. This revolver is offered as new in the factory box with the paperwork.

The 7-1/2" round barrel is marked CAL .36, BLACK POWDER ONLY, A. UBERTI, ITALY under the loading lever. The triggerguard and backstrap are blued steel. The frame, hammer, and loading lever are color case hardened in mottled colors. This revolver has the so-called four screw frame, cut to accept the Cavalry shoulder stock, which quickly attaches to convert this revolver to a carbine, for use by mounted troops. Notice the tiny notch cut in the recoil shield, and the fourth screw in the frame, which stands proud of the frame, to engage the shoulder stock. The shoulder stock is available separately, from others. Walnut grips are factory varnished to a satin finish, mounted in Colt style, finished in the classic Colt reddish brown color, made of one piece of walnut.

The factory recommends a .375" diameter round ball. We recommend our .380" diameter round ball #BALL-380-X for best compression. You may need to slightly chamfer the chamber mouths. If your revolver shaves lead, slightly polish each chamber mouth with fine emery and a marble, until the ball seats fully, compressing the lead instead of shearing it.

Disassembly for cleaning is easy. Drive the wedge key out of the barrel, using our brass wedge key punch. Slide off the barrel, and cylinder. Wipe down the frame and grip, but avoid disassembly. It is wise to completely strip and clean the action about once per year, using a well fitted screwdriver made to fit the small screws. Remove the nipples with our #NW-140 nipple wrench, and wash the barrel, nipples, and cylinder with a bottle brush, in hot soapy water. Dry the parts with a cloth, or rinse them in boiling water, and apply oil. Apply a touch of Birchwood Casey's Choke Tube Lubricant to the threads of the nipples, before re-installing them. This anti-seize will prevent the nipples from becoming stuck, a real problem with neglected revolvers.

This percussion revolver is offered in unfired condition, with the factory box and paperwork. The bore is bright, clean, and ready to shoot. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

.375" round balls, pure lead, Hornady, per 100

Part Number:	BALL-375
Availability:
Price:	$12.99
Order Quantity:

.380" round balls, pure lead, hand cast, per 100

Part Number:	BALL-380-X
Availability:
Price:	$16.69
Order Quantity:

Choke Tube Lube, anti-seize grease, 3/4 ounce tube, by Birchwood Casey

Part Number:	BC-CTL
Availability:
Price:	$9.99
Order Quantity:

Belt, black leather, 1-3/4" wide, waist size 30 to 46

Part Number:	BELT-BU-1B
Availability:
Price:	$26.99
Order Quantity:

Track's best Black Powder BORE CLEAN Solvent, with flip-top spout

Part Number:	BORE-CLEAN
Availability:
Price:	$4.59
Order Quantity:

Brass Capper, for No. 11 caps, straight line, made in the USA, by Tedd Cash

Part Number:	CAPPER-P
Availability:
Price:	$12.59
Order Quantity:

Powder Flask, Colt pattern for Army & Navy revolvers, accepts all spouts with 10-1mm threads

Part Number:	FLASK-COLT
Availability:
Price:	$53.59
Order Quantity:

Military Holster, right hand, black leather, plain flap

Part Number:	HOLSTER-MB-R
Availability:
Price:	$32.99

Military Holster, left hand, black leather, U.S. marked flap

Part Number:	HOLSTER-US-L
Availability:
Price:	$32.99
Order Quantity:

Button jagged cleaning tip, .36 caliber, brass, 10-32 thread

Part Number:	JB-36-10
Availability:
Price:	$3.99
Order Quantity:

Nipple Wrench for Revolvers, for 1858 Remington .44 Revolver, .31 & .36 Pocket & Police Model Colt Revolvers, and other revolvers with a tight nipple recess

Part Number:	NW-130
Availability:
Price:	$9.99
Order Quantity:

Ox-Yoke Revolver Wonder Seal, 100 seals for .36 cal.

Part Number:	OX-REV-36-SEAL
Availability:
Price:	$9.99
Order Quantity:

.36 caliber revolver Wonder Wad, bag of 100 lubricated felt wads

Part Number:	OX-WAD-36-W
Availability:
Price:	$7.99
Order Quantity:

Nipple, 12-28 aka 5.5-.9mm metric thread, for most brands of .31/.36 Colt and Remington pocket revolvers and many Uberti 1851, 1860, 1861 Colt & 1858 Remington revolvers, Colt brand second generation 1851 & 1860 revolvers, #11 CCI cap, hardened steel

Cone length: 0.285"
Thread journal length: 0.200"
Overall length: 0.485"
Diameter of base: 0.295"

Part Number:	PTC-PI
Availability:
Price:	$4.99
Order Quantity:

Nipple, 12-28 aka 5.5-.9mm metric thread, for most brands of.31/.36 Colt and Remington pocket revolvers and many Uberti 1851, 1860, 1861 Colt & 1858 Remington revolvers, Colt brand second generation 1851 & 1860 revolvers, #11 CCI cap, stainless steel

Cone length: 0.285"
Thread journal length: 0.200"
Overall length: 0.485"
Diameter of base: 0.295"

Part Number:	PTC-PS
Availability:
Price:	$4.99
Order Quantity:

Top of Page Home > Guns > Percussion guns > Percussion pistols & revolvers