1858 Remington New Model Army Revolver, .44 caliber, 8" barrel, percussion, blued, walnut, new, in factory box, by Aldo Uberti

Home > Guns > Percussion guns > Percussion pistols & revolvers

1858 Remington New Model Army Revolver,
.44 caliber, 8" barrel,
percussion, blued, walnut,
new, in factory box, by Aldo Uberti

Part Number:	AAW-599
Availability:

This nice 1858 Remington New Model Army revolver is finished to a deep blue with polished brass triggerguard. The revolver is offered as new in the factory box with the paperwork. The walnut grips have a medium gloss varnish. This .44 caliber steel frame revolver will give years of reliable service. It was manufactured by Aldo Uberti & Co. of Italy.

The barrel is unmarked on visible surfaces, except for the bottom flat, which is Cal .44 Black Powder Only - A. Uberti Italy . The 8" octagon barrel is fitted with a dovetailed post blade front sight. The notch in the center of the frame serves as the rear sight. The walnut grips are factory finished with a deep red satin varnish, mounted with a blued steel screw, through brass escutcheons. The brass triggerguard is polished bright. The Remington trigger is wide and comfortable. The rigid steel frame of the 1858 Remington made it highly prized by its users. More officers carried Colt revolvers during our Civil War. When the war ended, more Remington's were purchased by discharged officers.

The blued cylinder has the Remington safety notches cut between each nipple recess. Pull the hammer to half-cock, turn the cylinder to align the safety notch with the hammer nose, and set the hammer into the notch. You can safely carry this revolver with all six chambers loaded, if you rest the hammer in a safety notch. The cylinder is fitted with the original blued steel Italian nipples. We recommend replacing the nipples with our #PTC-PI 12-28 thread hardened steel nipples which are designed to accept CCI standard No. 11 caps.

The factory recommends a .451" diameter round ball. We recommend our #BALL-454 for best compression. You may need to slightly chamfer the chamber mouths. If your revolver shaves lead, slightly polish each chamber mouth with fine emery and a marble, until the ball seats fully, compressing the lead instead of shearing it.

This percussion revolver is offered in unfired condition, with the factory box and paperwork. The bore is bright, clean, and ready to shoot. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

.451" round balls, pure lead, Hornady, per 100

Part Number:	BALL-451
Availability:
Price:	$17.59
Order Quantity:

.454" round balls, pure lead, Hornady, per 100

Part Number:	BALL-454
Availability:
Price:	$17.99
Order Quantity:

Choke Tube Lube, anti-seize grease, 3/4 ounce tube, by Birchwood Casey

Part Number:	BC-CTL
Availability:
Price:	$9.99
Order Quantity:

Belt, black leather, 1-3/4" wide, waist size 30 to 46

Part Number:	BELT-BU-1B
Availability:
Price:	$26.99
Order Quantity:

Track's best Black Powder BORE CLEAN Solvent, with flip-top spout

Part Number:	BORE-CLEAN
Availability:
Price:	$4.59
Order Quantity:

Bore brush, bronze, for .45 caliber, 10-32 thread

Part Number:	BRUSH-45-10
Availability:
Price:	$4.29
Order Quantity:

Brass Capper, for No. 11 caps, straight line, made in the USA, by Tedd Cash

Part Number:	CAPPER-P
Availability:
Price:	$12.59
Order Quantity:

Powder Flask, Remington Pistol style flask, copper, with patina finish, accepts 10-1mm threaded spouts

Part Number:	FLASK-REMIN
Availability:
Price:	$48.00

Military Holster, left hand, black leather, U.S. marked flap

Part Number:	HOLSTER-US-L
Availability:
Price:	$32.99
Order Quantity:

Military Holster, right hand, black leather, U.S. marked flap

Part Number:	HOLSTER-US-R
Availability:
Price:	$32.99
Order Quantity:

Button jagged cleaning tip, .44 caliber, brass, 10-32 thread

Part Number:	JB-44-10
Availability:
Price:	$3.99
Order Quantity:

Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin

Part Number:	MINK-OIL
Availability:
Price:	$8.59

Nipple Wrench for Revolvers, for 1858 Remington .44 Revolver, .31 & .36 Pocket & Police Model Colt Revolvers, and other revolvers with a tight nipple recess

Part Number:	NW-130
Availability:
Price:	$9.99
Order Quantity:

Cleaning Patches, 2" diameter, bag of 100, pure cotton flannel, for .30 to .40 caliber

Part Number:	OX-CLEAN-45C
Availability:
Price:	$4.49
Order Quantity:

Ox-Yoke Revolver Wonder Seal, 100 seals for .44-.45 cal.

Part Number:	OX-REV-44-SEAL
Availability:
Price:	$9.99
Order Quantity:

.44/.45 caliber revolver Wonder Wad, bag of 100 lubricated felt wads

Part Number:	OX-WAD-44-W
Availability:
Price:	$7.99
Order Quantity:

Nipple, 12-28 aka 5.5-.9mm metric thread, for most brands of .31/.36 Colt and Remington pocket revolvers and many Uberti 1851, 1860, 1861 Colt & 1858 Remington revolvers, Colt brand second generation 1851 & 1860 revolvers, #11 CCI cap, hardened steel

Cone length: 0.285"
Thread journal length: 0.200"
Overall length: 0.485"
Diameter of base: 0.295"

Part Number:	PTC-PI
Availability:
Price:	$4.99
Order Quantity:

Nipple, 12-28 aka 5.5-.9mm metric thread, for most brands of.31/.36 Colt and Remington pocket revolvers and many Uberti 1851, 1860, 1861 Colt & 1858 Remington revolvers, Colt brand second generation 1851 & 1860 revolvers, #11 CCI cap, stainless steel

Cone length: 0.285"
Thread journal length: 0.200"
Overall length: 0.485"
Diameter of base: 0.295"

Part Number:	PTC-PS
Availability:
Price:	$4.99
Order Quantity:

Top of Page Home > Guns > Percussion guns > Percussion pistols & revolvers