Frontier Longrifle, .54 caliber, 39" barrel, flintlock, walnut, brass trim, used, by Davide Pedersoli

Home > Guns > Flintlock guns > Flintlock rifles

Frontier Longrifle,
.54 caliber, 39" barrel,
flintlock, walnut, brass trim,
used, by Davide Pedersoli

Part Number:	AAW-591
Availability:

Stocked in walnut, naturally finished to a medium brown, this flint longrifle is offered in used condition with a bright well maintained bore. Trimmed in brass, the furniture has developed a mellow patina from use. The straight octagon barrel is finished to a dark brown, and the large flintlock has a color case hardened finish. Manufactured by Davide Pedersoli & Co. of Italy. This nice rifle has a trigger reach of 14-1/4" and an overall weight of 7.5 pounds.

This sleek flint longrifle is a .54 caliber for hunting larger game, with 39" browned octagon barrel. The bore is rifled with a 1 in 65" twist for a tightly patched round ball. The bore is bright, clean, and ready to shoot. The barrel is fitted with an iron blade front sight, and full buckhorn rear sight positioned 11" ahead of the breech, in the location much preferred by shooters with corrective lenses. We note the left ear on the full buckhorn sight is bent slightly down and back. The corresponding front sight is located 2" behind the muzzle. The left oblique flat is stamped Black Powder Only - Italy/20 Pedersoli - cal. 54 along with various proof marks and the serial number near the breech. This rifle was manufactured in 2020. There are a few streaks of light surface pitting on the exterior barrel finish near the muzzle, and the breech end has some finish loss and small dings from the flint hitting the barrel flat.

This longrifle has a walnut stock with a Lehigh Valley influence with a gently curved comb and slender buttstock. The buttplate has a gentle curve to engage the shooter's shoulder. The walnut stock has numerous handling marks. The rifle is not decorated, made to be an utilitarian rifle. No entry pipe is fitted, and no pins or lugs are needed, since rod pipe mounting screws mount the forend to the barrel. A molding along the forend ends with a relief at the muzzle, to allow your fingers to easily grip and remove the rod. No decorative muzzle cap is used on Frontier rifles.

Our bottom view shows the sleek lines of the buttstock and lock panels. The long brass toeplate is mounted with two steel screws to protect this delicate area of the stock when loading. The polished brass triggerguard is surface mounted with a blued steel screw at rear, and a retaining pin at front. The triggerguard has a medium large bow, to accept the double set triggers. The wooden ramrod is fitted with brass tip that are both threaded to accept your 10-32 cleaning tools. Our back view shows the Kentucky rifle style cheek piece, and side panel. This attractive longrifle is slender and graceful, due to the simplicity of design.

The large rifle size flint lock is color case hardened in mottled colors. The lock sparks well, and the frizzen face shows scratches from used. We always recommend using a leather jaw pad, with our #FLINT-ENG-7 best English gun flint. Double lever double set triggers are correctly tuned to fire set or unset. You may cock the lock, or set the triggers, in any sequence. Thus, this rifle will serve you well when hunting big game during very cold weather. A tiny adjustment screw, between the two triggers, controls trigger release. Turn it inboard to reduces set trigger pressure, outboard to increase. You can set a very light trigger release, ideal for match shooting, or hunting small game in moderate weather. Ignition is aided by the stainless steel vent liner, perfectly centered and correctly positioned well above the pan, to serve as a window on the center of the priming flash. We stock the spare #THL-DP vent liner for Davide Pedersoli rifles and pistols, should you ever need a replacement.

This Pedersoli Frontier rifle has a bright well maintained bore and it will be perfect for your next big game hunt. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

.530" round balls, pure lead, Hornady, per 100

Part Number:	BALL-530
Availability:
Price:	$24.99
Order Quantity:

.530" round balls, pure lead, hand cast, per 50

Part Number:	BALL-530-X
Availability:
Price:	$15.49
Order Quantity:

Track's best Black Powder BORE CLEAN Solvent, with flip-top spout

Part Number:	BORE-CLEAN
Availability:
Price:	$4.59
Order Quantity:

Ball puller, steel screw, .54 caliber brass collar, 10-32 thread

Part Number:	BP-54-10
Availability:
Price:	$3.99
Order Quantity:

Bore brush, bronze, for .54 caliber, 10-32 thread

Part Number:	BRUSH-54-10
Availability:
Price:	$4.29
Order Quantity:

French amber gun flint, 7/8 x 1" for Fowler, Jaeger, Tulle, Twigg, Hatfield, Chambers locks. 2025 Note many of the current batch are a dark gray rather than amber color due to the vein of material being currently mined. We are temporarily limiting purchase of this item to twelve per order. We will manually edit your order if your order exceeds that amount.

Part Number:	FLINT-AMBER-7
Availability:
Price:	$3.10
Order Quantity:

Fouling Scraper, flat face, brass, .54 caliber, 10-32 thread

Part Number:	FS-54-10
Availability:
Price:	$4.29
Order Quantity:

Powder Horn, large, 11 to 14", with antique patina finish

Part Number:	HORN-A-L
Availability:
Price:	$74.50
Order Quantity:

Priming Horn, small, 4 to 5", with antique patina finish

Part Number:	HORN-A-S
Availability:
Price:	$62.50
Order Quantity:

Jag, jagged cleaning tip, brass, .54 caliber, 7/16" rod, 10-32 thread

Part Number:	JS-54-7-10
Availability:
Price:	$5.09
Order Quantity:

Powder measure, brass, adjustable 0 to 120 grains, with spout

Part Number:	MAS-120
Availability:
Price:	$22.99
Order Quantity:

Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin

Part Number:	MINK-OIL
Availability:
Price:	$8.59

Shooting patches, .018" pillow ticking, .50 - .59 caliber, per 100, dry

Part Number:	OX-18-50-D
Availability:
Price:	$5.29
Order Quantity:

Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber

Part Number:	OX-CLEAN-58C
Availability:
Price:	$5.79
Order Quantity:

Pick & Pan Brush, with brass chain, button clasp, and black bristle brush, for flint musket, rifle, or fowler

Part Number:	PICK-BRUSH-H
Availability:
Price:	$15.99
Order Quantity:

Forged steel vent pick, 2-1/2" long, for rifle

Part Number:	PICK-VENT-2
Availability:
Price:	$3.99
Order Quantity:

Ramrod, 7/16" hickory, 48" long, brass tip, 10-32 thread Made in the U.S.A.

Part Number:	RAMROD-7-10-B
Availability:
Price:	$19.99
Order Quantity:

Short Starter, patch & ball starter, 1/2" wooden rod for .54 and larger calibers.

Part Number:	ST-8
Availability:
Price:	$9.99
Order Quantity:

Timothy Pickering's Tool, medium size, for flint rifles & fowling guns, the first U. S. issue gun tool, designed by our first U. S. Quartermaster

Part Number:	TOOL-PICK-M
Availability:
Price:	$13.99
Order Quantity:

Primitive Rifleman's Turn Screw, hand forged tempered steel screwdriver, to fit in a longrifle patchbox

Part Number:	TOOL-TURN-U
Availability:
Price:	$8.99
Order Quantity:

Patch puller, corkscrew worm, steel, brass base, 10-32 thread

Part Number:	WORM-CORK-10
Availability:
Price:	$6.89

Top of Page Home > Guns > Flintlock guns > Flintlock rifles