bullets .458" diameter, 350 grain, for .45-90 Winchester lever action rifle, lubricated, pack of 50
Part Number: BULLET-458-350-FP
Availability: Out of Stock, request notification when available
Price: $18.99
  
This 350 grain round nose flat point bullet is the ideal weight for the 1876 and 1886 Winchester Rifle and Carbine.

Ideal for black powder cartridges, these bullets are cast of lead alloy, sized to exactly .458" diameter, lubricated in a large single grease groove, with a crimp groove for use in magazine rifles. Highly recommended for lever action or tubular magazine rifles, each bullet has a rounded nose with a flat point. Use flat point bullets in tubular magazine rifles, to reduce the possibility of accidental discharge due to recoil.

Now sold in a pack of fifty (50) sized and lubricated bullets, ready to hand load into your .45-70 or .45 Sharps cartridges, these are boxed in a hard plastic compartment tray, to arrive in perfect condition.

We offer the correct neck expander die, with .458" expander plug, at low cost. Order #LEE-DIE-45-EX die body plus our #DIE-458-EXP expander plug for .458" bullet to allow thumb press fit, without damaging or resizing the cast bullet.

Compress your black powder using the above die body, plus our #WAD-460-B thin white card plus our #DIE-45-COMPRESS powder compression plug for .45-70. Powder must normally be compressed about 5/8" to allow the bullet to seat properly.

If you use your lead bullet, to compress your powder, you will deform the bullet nose, which may not engage your chamber's throat properly.
SPG Black Powder Cartridge Reloading Primer,
revised 7th edition,
by Mike Venturino & Steve Garbe SPG Black Powder Cartridge Reloading Primer, revised 7th edition, by Mike Venturino & Steve Garbe
Part Number: BOOK-SPG
Availability: In Stock
Price: $21.99
Order Quantity:
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $3.99
Order Quantity:
Bore mop, 100% Cotton, for .45 caliber, 10-32 thread, washable Bore mop, 100% Cotton, for .45 caliber, 10-32 thread, washable
Part Number: BORE-MOP-45
Availability: In Stock
Price: $2.79
Order Quantity:
Bore brush, bronze, for .45 caliber, 10-32 thread Bore brush, bronze, for .45 caliber, 10-32 thread
Part Number: BRUSH-45
Availability: In Stock
Price: $2.99
Order Quantity:
bullets .458" diameter, 405 grain, for U. S. 45-70 Government, Lyman's 457-124, SPG lube, pack of 50 bullets .458" diameter, 405 grain, for U. S. 45-70 Government, Lyman's 457-124, SPG lube, pack of 50
Part Number: BULLET-458-405
Availability: Out of Stock, request notification when available
Price: $18.99
  
bullets .458'' diameter, 500 grain, .449" nose diameter for .45-70 Springfield, Lyman 457-125-AV, SPG lube, BHN 11, pack of 50 bullets .458'' diameter, 500 grain, .449" nose diameter for .45-70 Springfield, Lyman 457-125-AV, SPG lube, BHN 11, pack of 50
Part Number: BULLET-458-500-LYMAN
Availability: Out of Stock, request notification when available
Price: $18.99
  
bullets .458'' diameter, 500 grain, .440" nose diameter for .45-70 Sharps, Lyman 457-125-CM, SPG lube, BHN 11, pack of 50 bullets .458'' diameter, 500 grain, .440" nose diameter for .45-70 Sharps, Lyman 457-125-CM, SPG lube, BHN 11, pack of 50
Part Number: BULLET-458-500-SHARPS
Availability: Out of Stock, request notification when available
Price: $18.99
  
bullets, .458" diameter, 535 grain, Lyman's Postell, lubricated, for .45-70 and .45 Sharps single shot rifles, tray of 50 bullets, .458" diameter, 535 grain, Lyman's Postell, lubricated, for .45-70 and .45 Sharps single shot rifles, tray of 50
Part Number: BULLET-458-535-POSTELL
Availability: Out of Stock, request notification when available
Price: $18.99
  
bullets .459'' diameter, 480 grain, .449" nose diameter for .45-70 Springfield, Lyman 457-125-AV, SPG lube, BHN 11, pack of 50 bullets .459'' diameter, 480 grain, .449" nose diameter for .45-70 Springfield, Lyman 457-125-AV, SPG lube, BHN 11, pack of 50
Part Number: BULLET-459-500-LYMAN
Availability: Out of Stock, request notification when available
Price: $18.99
  
bullets, .459" diameter, 535 grain, Lyman's Postell, lubrcated, for .45-70 and .45 Sharps single shot rifles, tray of 50 bullets, .459" diameter, 535 grain, Lyman's Postell, lubrcated, for .45-70 and .45 Sharps single shot rifles, tray of 50
Part Number: BULLET-459-535-POSTELL
Availability: Out of Stock, request notification when available
Price: $18.99
  
Cartridge Case,
.45-70 Government,
unprimed brass,
correct head stamp,
2.1", by Starline,
each piece, no minimum order Cartridge Case, .45-70 Government, unprimed brass, correct head stamp, 2.1", by Starline, each piece, no minimum order
Part Number: CASE-45-70
Availability: Item is currently sold out.
Price: $0.48
Order Quantity:
Special Restrictions Apply
Not available for export outside the U.S.A.
  
Cartridge Case,
.45-70 Government,
unprimed brass,
correct head stamp,
2.1", by Starline,
50 pieces Cartridge Case, .45-70 Government, unprimed brass, correct head stamp, 2.1", by Starline, 50 pieces
Part Number: CASE-45-70-PACK-050
Availability: Item is currently sold out.
Price: $23.50
Order Quantity:
Special Restrictions Apply
Not available for export outside the U.S.A.
  
Cartridge Case,
.45-70 Government,
unprimed brass,
correct head stamp,
2.1", by Starline,
100 pieces Cartridge Case, .45-70 Government, unprimed brass, correct head stamp, 2.1", by Starline, 100 pieces
Part Number: CASE-45-70-PACK-100
Availability: Item is currently sold out.
Price: $43.00
Order Quantity:
Special Restrictions Apply
Not available for export outside the U.S.A.
  
Track's Catalog 18,
432 pages, full color Track's Catalog 18, 432 pages, full color
Part Number: CATALOG-18
Availability: In Stock
Price: $10.00
Order Quantity:
Neck Expander Plug,
.457" diameter,
to fit our
Lee 7/8-14 die Neck Expander Plug, .457" diameter, to fit our Lee 7/8-14 die
Part Number: DIE-457-EXP
Availability: In Stock
Price: $2.99
Order Quantity:
Neck Expander Plug,
.458" diameter,
to fit our
Lee 7/8-14 die Neck Expander Plug, .458" diameter, to fit our Lee 7/8-14 die
Part Number: DIE-458-EXP
Availability: In Stock
Price: $2.99
Order Quantity:
Neck Expander Plug,
.459" diameter,
to fit our
Lee 7/8-14 die Neck Expander Plug, .459" diameter, to fit our Lee 7/8-14 die
Part Number: DIE-459-EXP
Availability: In Stock
Price: $2.99
Order Quantity:
Neck Expander Plug,
.460" diameter,
to fit our
Lee 7/8-14 die Neck Expander Plug, .460" diameter, to fit our Lee 7/8-14 die
Part Number: DIE-460-EXP
Availability: In Stock
Price: $2.99
Order Quantity:
Neck Expander Plug,
.461" diameter,
to fit our
Lee 7/8-14 die Neck Expander Plug, .461" diameter, to fit our Lee 7/8-14 die
Part Number: DIE-461-EXP
Availability: In Stock
Price: $2.99
Order Quantity:
Black powder, GOEX, 1 pound, made in the USA, 2Fg medium granulation for rifles, shotguns, muskets, cartridges. Shipped in full cases, 25 one pound cans, any mix of granulations, any mix of brands. Black powder, GOEX, 1 pound, made in the USA, 2Fg medium granulation for rifles, shotguns, muskets, cartridges. Shipped in full cases, 25 one pound cans, any mix of granulations, any mix of brands.
Part Number: GOEX-FFG
Availability: In Stock
Price: $18.26
Order Quantity:
Special Restrictions Apply
Not available for export outside the U.S.A.
Black powder, GOEX, 1 pound, made in the USA, 1Fg coarse granulation for large bore shotguns, muskets, cartridges. Shipped in full cases, 25 one pound cans, any mix of granulations, any mix of brands. Black powder, GOEX, 1 pound, made in the USA, 1Fg coarse granulation for large bore shotguns, muskets, cartridges. Shipped in full cases, 25 one pound cans, any mix of granulations, any mix of brands.
Part Number: GOEX-FG
Availability: In Stock
Price: $18.26
Order Quantity:
Special Restrictions Apply
Not available for export outside the U.S.A.
Jag, jagged cleaning tip, brass, .45 caliber, 3/8 rod, 8-32 thread Jag, jagged cleaning tip, brass, .45 caliber, 3/8 rod, 8-32 thread
Part Number: JS-45-6-8
Availability: In Stock
Price: $3.59
Order Quantity:
Lee Bullet Mold .45-70 caliber, .459" diameter, 405 grain, hollow base U.S. 1873 Government mold, single cavity Lee Bullet Mold .45-70 caliber, .459" diameter, 405 grain, hollow base U.S. 1873 Government mold, single cavity
Part Number: LEE-90268
Availability: In Stock
Price: $23.39
Order Quantity:
Lee Bullet Mold .45-70 caliber, .457" diameter, 340 grain, flat nose, solid base BPCR mold, double cavity Lee Bullet Mold .45-70 caliber, .457" diameter, 340 grain, flat nose, solid base BPCR mold, double cavity
Part Number: LEE-90373
Availability: In Stock
Price: $19.29
Order Quantity:
Lee Bullet Mold .45-70 caliber, .457" diameter, 405 grain, flat nose, solid base BPCR mold, double cavity Lee Bullet Mold .45-70 caliber, .457" diameter, 405 grain, flat nose, solid base BPCR mold, double cavity
Part Number: LEE-90374
Availability: In Stock
Price: $19.29
Order Quantity:
Lee Bullet Mold .45-70 caliber, .457" diameter, 450 grain, flat nose, solid base BPCR mold, double cavity Lee Bullet Mold .45-70 caliber, .457" diameter, 450 grain, flat nose, solid base BPCR mold, double cavity
Part Number: LEE-90375
Availability: In Stock
Price: $19.29
Order Quantity:
Lee Bullet Mold .45-70 caliber, .457" diameter, 500 grain, flat nose, solid base BPCR mold, double cavity Lee Bullet Mold .45-70 caliber, .457" diameter, 500 grain, flat nose, solid base BPCR mold, double cavity
Part Number: LEE-90376
Availability: In Stock
Price: $19.29
Order Quantity:
LEE Classic Cast Reloader Press,
for pistol or rifle cartridges LEE Classic Cast Reloader Press, for pistol or rifle cartridges
Part Number: LEE-90998
Availability: In Stock
Price: $132.99
Order Quantity:
Lee Liquid Alox, 4 oz. bottle Lee Liquid Alox, 4 oz. bottle
Part Number: LEE-ALOX
Availability: In Stock
Price: $5.29
Order Quantity:
LEE Loading Dies,
caliber .45-70 Gov't,
including shell holder LEE Loading Dies, caliber .45-70 Gov't, including shell holder
Part Number: LEE-DIE-45-70
Availability: In Stock
Price: $32.99
Order Quantity:
LEE Neck Expander Die,
7/8-14 thread,
for our neck expander plugs
or powder compression plugs,
each sold separately LEE Neck Expander Die, 7/8-14 thread, for our neck expander plugs or powder compression plugs, each sold separately
Part Number: LEE-DIE-45-EX
Availability: In Stock
Price: $13.99
Order Quantity:
Handles, for bullet mold, LEE Commercial mold handles for six cavity molds, also fit Lyman, RCBS and similar mold blocks. Handles, for bullet mold, LEE Commercial mold handles for six cavity molds, also fit Lyman, RCBS and similar mold blocks.
Part Number: LEE-HANDLE
Availability: In Stock
Price: $14.59
Order Quantity:
Shell holder, #8, by LEE, for 38-56, 40-65,& 45-70 to .45-120 Shell holder, #8, by LEE, for 38-56, 40-65,& 45-70 to .45-120
Part Number: LEE-SHELL-08
Availability: In Stock
Price: $3.39
Order Quantity:
SPG Bullet Lubricant,
one 1-1/4 ounce stick, for Black or Smokeless Powder SPG Bullet Lubricant, one 1-1/4 ounce stick, for Black or Smokeless Powder
Part Number: LUBE-SPG
Availability: In Stock
Price: $3.59
Order Quantity:
Lyman 310 Die Set,
.45-70 Government,
use large 310 handles Lyman 310 Die Set, .45-70 Government, use large 310 handles
Part Number: LYMAN-310-4570
Availability: In Stock
Price: $65.99
Order Quantity:
Lyman 310 Tool,
large handles for rifle calibers Lyman 310 Tool, large handles for rifle calibers
Part Number: LYMAN-310-L
Availability: Item is currently sold out.
Price: $59.99
Order Quantity:
  
Bullet Mold,
.457" diameter, 330 grain hollow point mold,
single cavity steel mold blocks,
by Lyman
Bullet Mold, .457" diameter, 330 grain hollow point mold, single cavity steel mold blocks, by Lyman
Part Number: LYMAN-457-122
Availability: In Stock
Price: $71.99
Order Quantity:
Bullet Mold,
.457" diameter, 385 grain bullet mold,
single cavity steel mold blocks,
by Lyman

Bullet Mold, .457" diameter, 385 grain bullet mold, single cavity steel mold blocks, by Lyman
Part Number: LYMAN-457-124
Availability: In Stock
Price: $71.99
Order Quantity:
Bullet Mold,
.457" diameter, 500 grain bullet mold,
single cavity steel mold blocks,
by Lyman
Bullet Mold, .457" diameter, 500 grain bullet mold, single cavity steel mold blocks, by Lyman
Part Number: LYMAN-457-125
Availability: In Stock
Price: $71.99
Order Quantity:
Bullet Mold,
.457" diameter, 535 grain bullet mold,
single cavity steel mold blocks,
by Lyman
Bullet Mold, .457" diameter, 535 grain bullet mold, single cavity steel mold blocks, by Lyman
Part Number: LYMAN-457-132
Availability: In Stock
Price: $71.99
Order Quantity:
Bullet Mold,
.457" diameter, 292 grain bullet mold,
single cavity steel mold blocks,
by Lyman

Bullet Mold, .457" diameter, 292 grain bullet mold, single cavity steel mold blocks, by Lyman
Part Number: LYMAN-457-191
Availability: In Stock
Price: $71.99
Order Quantity:
Bullet Mold,
.457" diameter, 405 grain bullet mold,
single cavity steel mold blocks,
by Lyman

Bullet Mold, .457" diameter, 405 grain bullet mold, single cavity steel mold blocks, by Lyman
Part Number: LYMAN-457-193
Availability: In Stock
Price: $71.99
Order Quantity:
Bullet Mold,
.457" diameter, 400 grain bullet mold,
single cavity steel mold blocks,
by Lyman

Bullet Mold, .457" diameter, 400 grain bullet mold, single cavity steel mold blocks, by Lyman
Part Number: LYMAN-457-643
Availability: In Stock
Price: $71.99
Order Quantity:
Bullet Mold,
.457" diameter, 500 grain bullet mold,
Schmittzer pointed bullet,
single cavity steel mold blocks,
by Lyman Bullet Mold, .457" diameter, 500 grain bullet mold, Schmittzer pointed bullet, single cavity steel mold blocks, by Lyman
Part Number: LYMAN-457-658
Availability: Item is currently sold out.
Price: $71.99
Order Quantity:
  
Case Lube,
2 oz. bottle, by Lyman Case Lube, 2 oz. bottle, by Lyman
Part Number: LYMAN-CASE-LUBE
Availability: In Stock
Price: $5.99
Order Quantity:
Case Lube Pad,
by Lyman Case Lube Pad, by Lyman
Part Number: LYMAN-CASE-PAD
Availability: In Stock
Price: $8.59
Order Quantity:
Lyman Three Die Set,
for .45-70 Government Lyman Three Die Set, for .45-70 Government
Part Number: LYMAN-DIE-45-70
Availability: In Stock
Price: $49.99
Order Quantity:
Handles for large mold blocks,
by Lyman,
fits all current single and double cavity molds Handles for large mold blocks, by Lyman, fits all current single and double cavity molds
Part Number: LYMAN-H-L
Availability: In Stock
Price: $38.99
Order Quantity:
.457" Sizing & Lube die,
by Lyman .457" Sizing & Lube die, by Lyman
Part Number: LYMAN-HI-457
Availability: In Stock
Price: $27.69
Order Quantity:
.458" Sizing & Lube die,
by Lyman .458" Sizing & Lube die, by Lyman
Part Number: LYMAN-HI-458
Availability: In Stock
Price: $27.69
Order Quantity:
.459" Sizing & Lube die,
by Lyman .459" Sizing & Lube die, by Lyman
Part Number: LYMAN-HI-459
Availability: In Stock
Price: $27.69
Order Quantity:
Shell holder #17,
by Lyman,
fits .40-65 & .45-70 to .45-120 Shell holder #17, by Lyman, fits .40-65 & .45-70 to .45-120
Part Number: LYMAN-SHELL-17
Availability: In Stock
Price: $7.59
Order Quantity:
Trapper's MINK OIL TALLOW,
patch grease,
for match shooting & cold weather hunting,
one 6 oz. tin Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 6 oz. tin
Part Number: MINK-OIL
Availability: In Stock
Price: $6.59
Order Quantity:
Cleaning Patches, 2" diameter, bag of 100, pure cotton flannel, for .35 to .45 caliber Cleaning Patches, 2" diameter, bag of 100, pure cotton flannel, for .35 to .45 caliber
Part Number: OX-CLEAN-45C
Availability: In Stock
Price: $2.79
Order Quantity:
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773
Tel: 763-633-2500 Fax: 763-633-2550

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2014Track of the Wolf, Inc.
Accepted Credit Cards